ICS Triplex T8442C Trusted CCoat TMR 3‑Channel Speed Monitor Module
Technical Specifications
Mechanical Specifications
Form Factor: Trusted chassis‑mounted module (fits standard Trusted controller/expander chassis slots)
Dimensions (H×W×D): 241 mm × 51 mm × 181 mm (9.5 in × 2.0 in × 7.1 in)
Weight: 1.2 kg (2.65 lb)
Front Panel: 3 speed channel LEDs (green = active), 4 relay output LEDs (red = de‑energized/tripped), power LED (green), fault LED (red), hot swap release lever
Mounting: Tool‑less insertion into Trusted chassis
Material: Industrial‑grade PCB with conformal coating + CCoat corrosion‑resistant finish; metal shielded enclosure for EMC compliance
Connectors: 96‑way C‑type backplane connector; dual redundant 24 VDC power inputs (diode‑ORed)
Coating: CCoat corrosion protection (ASTM B117 salt spray compliant)
Electrical Specifications
Input Type: Magnetic pickup (10–10,000 Hz), proximity sensor (PNP/NPN), optical encoder (TTL/HTL)
Input Range: 0.1–100,000 RPM; 0.01–100 g acceleration
Input Impedance: 1 kΩ (magnetic pickup); 10 kΩ (proximity/optical)
Power Supply: 20–32 VDC redundant backplane supply (24 VDC nominal)
Power Consumption: < 8 W maximum
Outputs: 4 quad‑redundant DTT relays per machine group (250 VAC/30 VDC, 5 A resistive load)
Update Rate: 10 ms (speed measurement); 1 ms (SOE event capture)
Isolation: 2500 VDC galvanic between channels, backplane, and field circuits
Overvoltage Protection: ±15 VDC (sensor inputs); ±40 VDC (power inputs)
Diagnostics: Sensor open/short detection; relay contact monitoring; TMR voting discrepancy alerts; power fault detection
ICS Triplex T8314 Trusted Fibre Transmitter
Technical Specifications
Mechanical Specifications
Form Factor: Compact DIN rail‑mounted enclosure (compatible with 35 mm DIN rails)
Dimensions (H×W×D): 90 mm × 60 mm × 45 mm (3.54 in × 2.36 in × 1.77 in)
Weight: 0.5 kg (1.10 lb)
Front Panel: SC duplex connectors (1 TX, 1 RX); power LED (green = active); fault LED (red = power/link fault)
Mounting: Tool‑less DIN rail clamps for quick installation
Material: Metal enclosure with EMC shielding; industrial‑grade PCB with conformal coating
Connectors: 2× SC fiber (TX/RX); 2× screw terminals (dual power input); 2× screw terminals (copper expander bus I/O)
Electrical Specifications
Power Supply: Dual 18–32 VDC diode‑ORed redundant input (24 VDC nominal)
Power Consumption: < 1.7 W maximum
Communication Data Rate: 250 Mbps (matches Trusted Expander Bus speed)
Signal Conversion: Differential copper expander bus ↔ fiber optic (850 nm wavelength)
Transmission Distance: Up to 10 km (single‑mode fiber)
Isolation: 2500 VDC fiber‑to‑copper isolation; 1500 VDC channel‑to‑chassis
Redundancy: Dual power inputs with automatic failover; supports TMR system redundancy via bus protocol
