Show sidebar
Show 9 12 18 24

ALSTOM PIB310 3BHB0190 Industrial Automation Control Module

Technical Specifications:
  • Input Voltage Range: Typically supports 110V~380V AC, with some configurations supporting 24V DC.
  • Output Voltage Range: 24V DC.
  • Current Capacity: Maximum current capacity up to 2000A.
  • Power Range: Maximum power output up to 500W.
  • Operating Temperature Range: -20°C to +60°C or higher, depending on the specific configuration.
  • Protection Rating: IP20 or higher, providing protection against dust and accidental contact.
  • Communication Protocols: Supports Modbus RTU and other industrial communication protocols for seamless integration with various devices and networks.
  • Dimensions and Weight: Typically measures 100mm × 100mm × 50mm, with a weight of approximately 0.85kg.
Read more
Quick view

ALSTOM PIB3103BHB0190 Advanced Substation Protection and Control Unit

Technical Specifications:
  • Voltage Rating: Supports systems up to 36 kV or higher, depending on configuration.
  • Current Rating: Compatible with a broad range of current transformers (CTs) and protection current levels.
  • Protection Functions:
    • Overcurrent Protection: Phase, ground, and residual current protection.
    • Differential Protection: For transformers, generators, and busbars.
    • Distance Protection: For transmission lines with zone-specific settings.
    • Voltage Protection: Undervoltage, overvoltage, and voltage imbalance detection.
    • Frequency Protection: Underfrequency and overfrequency relaying.
    • Power Swing Blocking: Prevents maloperation during power system oscillations.
Read more
Quick view

ALSTOM PIB671-1500

Product Name:​ Alstom PIB671-1500 Power Interface Board / 24 VDC Distribution Module
Product Introduction:​ A rack-interfaced power entry and distribution board for Alstom DCS/relay racks, converting and conditioning upstream AC/DC into isolated 24 VDC for backplane electronics.
Read more
Quick view

ALSTOM UMT162 CS-C3

Manufacturer:​ ALSTOM (GE Power heritage) — UMT series
Product Brief:​ A microprocessor-based, high-integrity protection relay for continuous monitoring of vibration (radial / axial), shaft displacement, and rotor speed on steam, gas, and hydro turbines. Provides Alarm and Trip relay outputs with self-diagnostics.
Read more
Quick view

ALSTOM UT150-1

Manufacturer:​ ALSTOM (now GE Vernova) — ALSPA C300/C400 & Mark VIe DCS family
Product Brief:​ An 8-channel galvanically isolated temperature acquisition module for thermocouples, RTDs, and millivolt signals, designed for steam/gas turbine and boiler temperature monitoring in power plants.
Read more
Quick view

ALSTOM VCS232 590.043158

  • Product Name:​ Turbine Control Communication / Valve Control Interface Module
  • Product Introduction:​ Communication and signal-conditioning board for ALSTOM (GE Grid Solutions) steam turbine DEH systems and HVDC/FACTS valve control architectures. Provides serial links and isolated I/O bridging between controller (P320/P340) and field termination.
Read more
Quick view

AMAT 0010-23716

Product Introduction: The AMAT 0010-23716 is a precision gas flow control component used in Applied Materials semiconductor wafer processing equipment. It is part of the gas delivery system that supplies process gases (such as NF₃, SiH₄, WF₆, NH₃, O₂, N₂, Ar) to the process chamber at precisely controlled flow rates. This part is typically a Mass Flow Controller (MFC) or a sub-assembly within a gas panel used in PVD (Physical Vapor Deposition), CVD (Chemical Vapor Deposition), or Etch systems.
Read more
Quick view

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

AMAT 0090-07135

Manufacturer: Applied Materials, Inc. Product Overview: Precision-machined gas manifold used in AMAT CVD (Chemical Vapor Deposition) and Etch process chambers. This component distributes process gases uniformly across the wafer surface during thin-film deposition.
Read more
Quick view

AMAT 0090-76110 VME PCB Controller – Complete Technical Profile

Functional Features

  1. High-Density Integration
    • Supports complex circuitry with 5 μm trace precision, enabling miniaturization for industrial systems .
    • Modular design for hot-swappable components, reducing maintenance downtime .
  2. Real-Time Control Capabilities
    • VME64x bus architecture provides deterministic data transfer for critical automation tasks (e.g., robotics, process control) .
    • Integrated PowerPC processor executes IEC 61131-3-compliant logic (e.g., ladder diagrams, structured text) .
  3. Robust Industrial Design
    • FR4 material combined with ENIG coating ensures corrosion resistance and reliable solder joints in harsh environments .
    • Fanless operation and vibration resistance per IEC 60068 standards .
  4. Flexible Connectivity
    • Dual-mode I/O: Supports Profibus DP, Modbus TCP, and CAN bus for legacy/system integration .
    • CompactFlash/IDE interfaces for data logging and firmware updates .
Read more
Quick view

AMAT 0090‑76110

Product Name: Synergy VME Bus Single‑Board Computer PCB Assembly 0090‑76110 Product Brief Introduction: VME‑bus standard single‑board computer developed by Applied Materials (AMAT), which serves as core control CPU board inside AMAT semiconductor process equipment, responsible for equipment logic control, sensor data processing and subsystem coordination management.
Read more
Quick view

AMAT 0100-09123

Manufacturer: Applied Materials, Inc. Product Overview: High-precision electrostatic chuck used in AMAT etching and deposition chambers. This ESC holds 200 mm or 300 mm wafers via Coulombic electrostatic force, enabling uniform heat transfer and wafer clamping without mechanical stress.
Read more
Quick view