Honeywell MC-41110400
Product Description: A proprietary printed circuit board assembly / I/O or controller module used within Honeywell's Experion PKS distributed control system (DCS) C300/Series C architecture. It interfaces field signals with the control network or acts as a system processor board depending on slot assignment.
ZIEHL MSF-220-SE
Product Brief: Monitors up to two independent strings of PTC thermistors (DIN 44081/44082) embedded in motors, dry-type transformers, or bearings. If any PTC resistance exceeds the trip threshold (> 1,800 Ω typical, switching point < 4,000 Ω) the relay drops out and triggers alarm/shutdown. Includes power-on delay to suppress nuisance tripping when supply is applied (transformer secondary used as supply). Two independently configurable changeover relays for pre-alarm and trip/off functions.
KONGSBERG MRU-M-MB3
Product Brief: High-precision solid-state Motion Reference Unit providing real-time six degrees of freedom (roll, pitch, yaw, heave, surge, sway) and linear accelerations. Designed for marine dynamic positioning, crane heave compensation, ROV/AUV navigation aiding, antenna stabilization, and wave monitoring. Uses MEMS inertial sensors with Kalman-filter sensor fusion; optionally aided by external GNSS/DVL for enhanced heave accuracy.
Vibro-Meter MPC4 VM600 200-510-076-114
Product Brief: The MPC4 is a plug-in 6U Eurocard that acquires up to four dynamic (AC) signals from vibration/position sensors (accelerometers, velocity pickups, eddy-current probes) plus two tacho/keyphasor inputs. It performs digital filtering (high-pass / low-pass / band-pass, 6–60 dB/octave, software-configurable), integration/differentiation, true RMS / peak / peak-peak calculation, order tracking, and compares against programmable Alert/Danger setpoints. Communicates with VM600 IOC4T/IOT modules via backplane for alarm relays, analog outputs, and host communication. Fully compliant with API 670.
GE MMY30-R2B2G
Product Brief: Industrial-grade, microprocessor-based dew point transmitter designed for continuous online measurement of moisture in gases. Utilizes a thin-film aluminum oxide (Al₂O₃) capacitive sensor. Loop-powered (2-wire) with 4–20 mA output proportional to dew point temperature or ppmv. Option code R2B2G typically denotes specific housing/config (R2 = ½″ NPT process connection / sampling arrangement; B2 = display & keypad; G = general purpose / metric units — verify against official option table).
EPRO MMS3210-020-020
Product Series: EPRO MMS3000 Transmitter Series (MMS3210 sub-family)
Product Brief: Stand-alone or rack-mountable transmitter that accepts two eddy-current probe inputs (PR 6422/23/24/25/26 series with appropriate preamplifier) and converts shaft relative vibration/displacement signals into two independent proportional 0/4–20 mA analog outputs. Can be configured for single max-value output or dual independent outputs. Includes built-in self-test and "OK" status contact. Conforms to API 670.
EPRO MMS6210
Product Series: EPRO MMS6000 Series — part of AMS 6500 / MMS3000 machinery protection system
Product Brief: Plug-in measurement module for continuous monitoring of relative shaft displacement (axial thrust position / differential expansion) using two independent eddy-current proximity probe inputs. Provides conditioned DC position signal, alarm/danger evaluation per channel, and 0/4–20 mA plus 0–10 V outputs for integration into DCS/PLC. Compliant with API 670.
Hirschmann MM20-Z6Z6Z6Z6SBH
Product Brief: Hot-swappable expansion module that adds four independent 100 Mbps Fast Ethernet fiber ports via SFP slots to a Hirschmann MS20 or MS30 chassis. SFP transceivers (not included) are user-installable for multimode or singlemode fiber as required.
Model Decoding: MM20 = Media Module 20-series; Z6 = 100BASE-FX SFP slot; 4× Z6 = four SFP ports; SBH = hardware revision / conformal coating option for industrial environments
MDB MLSI-DR11-W
Product Series: MDB MLSI Series — legacy-compatible interface / modern DIN-rail I/O variant
Product Brief: Compact DIN-rail mounted digital input/output and relay interface used for machine panel control, OEM equipment integration, or as a modern replacement/adaptation of classic DEC DR11-W parallel I/O concepts in industrial cabinets. Provides optically isolated 24 VDC digital inputs and relay contact outputs (SPST/SPDT per variant) for low-voltage load switching.
Microsonic MIC+130/IU/TC
Product Series: microsonic mic+ Series — cylindrical M30 version
Product Brief: Non-contact ultrasonic proximity/distance sensor for level, position, and object detection; measures distance via time-of-flight (echo propagation time) and provides one configurable analog output (4–20 mA / 0–10 V) plus two programmable switching (NPN/PNP) outputs. Equipped with TouchControl pushbuttons and 3-digit LED display for teach-in configuration.
Honeywell CC-TUIO31
Product Brief
9-inch non-redundant multi-signal wiring terminal base exclusively designed for CC-PUIO31 32-channel universal IOM; supports mixed analog input, analog output, digital input, digital output and pulse frequency signal termination on single terminal unit; integrates multi-type signal surge protection, HART coupling, channel isolation and pulse signal conditioning circuits, unified mechanical wiring interface for all universal field signal types.
Honeywell CC-TDOB01
Product Brief
9-inch non-redundant wiring terminal base for 24 VDC discrete digital output control signals; provides screw terminal connections for solenoid valves, motor starter coils, indicator lights and discrete field actuators; integrates per-channel short-circuit protection, inductive load flyback suppression and channel isolation circuits, mechanical interface between digital output IOM and discrete field actuator wiring.
