Bürkert SE35 00423924
Product Introduction:
The SE35 is a snap-on electronic display/transmitter module that mounts onto a Bürkert S030 paddle-wheel sensor housing to form the Type 8035 flowmeter or batch controller. It converts the frequency signal from the turbine sensor into a scalable analog (4–20 mA) and/or pulse output, and displays instantaneous flow rate and totalized volume on a local LCD.
Yokogawa SCP451-51
Product Introduction:
The SCP451-51 is the central logic solver (Safety PLC processor) within Yokogawa's ProSafe-RS SIS. It executes safety application logic, monitors I/O modules, performs self-diagnostics, and communicates with the CENTUM VP DCS via Vnet/IP or ESB bus. Certified for SIL3 (IEC 61508/ IEC 61511) applications.
DEIF SCM-2 1044220110E
Product Introduction:
The SCM-2 is an intelligent synchronization and measurement module for DEIF Delomatic® 3/4 generator control systems. It monitors generator and busbar voltage, frequency, and phase angle; issues correction signals to the engine governor (speed) and AVR (voltage); and closes the breaker only when synchronism criteria are met. It also provides 3-phase measurement and basic protection functions.
Pacific Scientific 33VM52-000-29
ElectroCraft SCA-SS-70-10
Product Introduction:
The SCA-SS-70-10 is a fully enclosed four-quadrant PWM servo amplifier for brushed permanent-magnet DC (PMDC) motors. Housed in a rugged extruded aluminum case, it is configured via DIP switches for torque, IR compensation, tachometer-based speed control, or encoder-based speed control. It is widely used to retrofit or drive small- to medium-sized DC servo motors in OEM machinery.
ABB SCA1390
Product Introduction:
The ABB SCA1390 is a compact single-axis servo drive designed for high-performance motion control in machine automation — including packaging, textile, printing, and electronics assembly lines. It forms part of ABB's servo system solution together with ABB servo motors (HDS/eSM series). The drive supports torque, speed, and position control modes via analog reference, pulse & direction, or fieldbus communication.
Moog SM2315DT-BRKETH
Product Name: Moog Animatics Class 5 SmartMotor™ SM2315DT-BRKETH — NEMA 23 Integrated Brushless Servo Motor with Holding Brake and Ethernet Communication
Product Brief:
An all-in-one motion product combining a NEMA 23 brushless servo motor, drive electronics, 20-bit absolute encoder, spring-applied holding brake, and Ethernet (EtherNet/IP with CIP Motion / Modbus TCP) communications — no separate servo drive required.
Parker SLVD2N
Product Name: Parker Hannifin SLVD-N Series Compact Servo Drive, Model SLVD2N (SLVD2NDR variant)
Product Brief:
The SLVD2N is a compact single-/three-phase servo amplifier from Parker's SLVD-N range, designed for cost-effective motion control with optional fieldbus communications. "DR" suffix typically denotes a specific firmware/connector variant.
Emerson SLS1508 KJ2201X1-BA1
Product Name: Emerson DeltaV SIS Logic Solver SLS 1508, Part Number KJ2201X1-BA1 (12P3162X112)
Product Brief:
A Safety Instrumented System (SIS) logic solver certified for process safety applications, forming part of the Emerson DeltaV SIS architecture. Executes safety logic independently from the basic process control system.
Rolls-Royce SLIO-02
INCA CHLORIDE SG-1124-4
Product Name: INCA Chloride SG-1124-4 Multi-Channel Analog Input / Relay Output Signal Conditioner Module
Product Brief:
A legacy Eurocard-format industrial electronics module from INCA Chloride's water-treatment and chlorination control systems line, used to condition analog sensor signals (chloride, pH, conductivity) and drive alarm/control relays.
