Kongsberg 4S12PLSH20BKM

Product Overview: A stainless steel compression/tension load cell with internal amplifier, designed for force measurement in industrial weighing and process control applications. The model code breakdown: 4S = series, 12 = capacity range, P = platform type, L = low profile, S = stainless steel, H = hermetic seal, 20 = 20 mV/V output, B = bridge configuration, K = connector type, M = metric.

KONGSBERG DPS112

  • Product Name: DGNSS Sensor / Positioning Receiver
  • Product Introduction: The Kongsberg DPS112 is a high-precision Differential Global Navigation Satellite System (DGNSS)​ sensor designed for marine vessels and offshore platforms to provide sub-meter positioning data for Dynamic Positioning (DP) systems.

Kongsberg Maritime RCU502I

  • Product Name:​ RCU502I Remote Control Unit (Intelligent Remote I/O & Logic Controller)
  • Part Number:​ 421768
  • Processor:​ Dual ARM Cortex-R5 (lockstep mode) @ 800 MHz — SIL 2 capable
  • I/O Capacity (typical):​ 16 × Digital Inputs 24 V DC (opto-isolated), 8 × Analog Inputs 4–20 mA / ±10 V (12-/16-bit), 8 × Relay Digital Outputs (5 A, NO/NC)

Kongsberg Maritime RDIOR400

Remote Digital I/O Module – RIO400 Series
  • Product Name:​ RDIOR400 Remote Digital Input/Output Module
  • Part Number:​ 600301 (also referenced as 600950 in later revisions)
  • System:​ Kongsberg RIO400 distributed I/O for K-Chief / K-Sim

Kongsberg Maritime RMP201-8

Remote Multi-Purpose I/O Module – K-Chief / K-Power
  • Product Name:​ RMP201-8 Remote Multi-Purpose I/O Module
  • Part Number:​ 324400 (RMP201-8)
  • System Integration:​ Kongsberg K-Chief 600 / K-Power / DP systems

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration

Kongsberg MRU-E-JB3

Product Name:​ Kongsberg MRU-E (5th Gen) Motion Reference Unit with JB3 Terminal Interface
Product Overview:​ A high-precision inertial sensor measuring roll, pitch, and heave motions, optimized for marine and offshore applications including DP, survey, and helideck monitoring.

KONGSBERG MRU-M-MB3

Product Brief:​ High-precision solid-state Motion Reference Unit providing real-time six degrees of freedom (roll, pitch, yaw, heave, surge, sway) and linear accelerations. Designed for marine dynamic positioning, crane heave compensation, ROV/AUV navigation aiding, antenna stabilization, and wave monitoring. Uses MEMS inertial sensors with Kalman-filter sensor fusion; optionally aided by external GNSS/DVL for enhanced heave accuracy.

KONGSBERG TRX32 303088

There is no detailed official technical specification data at present. However, according to relevant information, it is a transponder that supports broadband signals. The UHF radio frequency of similar products like Seatrack 320 from Kongsberg ranges from 450 - 470 MHz, with a channel separation of 12.5 kHz and a transmission power of 0.5 W, and the typical line - of - sight range can reach 15 km. The operating temperature range is - 10 °C to + 55 °C, and the storage temperature range is - 30 °C to + 70 °C, with an IP68 - compliant enclosure.

Kontron KTQ77FLEX 30101611

  • Product Name: Kontron KTQ77/FLEX Embedded FLEX-ATX Motherboard (Part No. 30101611)
  • Product Introduction: Long-term available industrial-grade motherboard based on Intel Q77 chipset, designed for embedded computing and industrial automation requiring high graphics and CPU performance.

KOYO D0-06DD1-D

Product Introduction

DIN rail mounted entry-level micro PLC with integrated discrete digital input and output terminals, designed for simple sequential logic automation control of small standalone machinery equipment. Equipped built-in RS232/RS485 communication ports, supports ladder diagram programming and basic timer/counter logic execution without external expansion modules.

KOYO D4-32TD2

Product Introduction

High-density modular main CPU unit with integrated digital I/O terminals, supporting multi-slot rack I/O expansion modules for medium-scale sequential and motion automation control. Equipped high-speed pulse output channels, multi-protocol serial communication interfaces and expandable program memory, targeted for automated machinery with complex multi-point discrete signal processing requirements.