Yaskawa USAGED-13A21SE

Product Name: AC Servo Motor Product Description: US series medium inertia AC servo motor, designed for high-precision continuous operation. Technical Specifications: Rated power 1.3kW; Rated speed 1500rpm; Rated torque 8.34N·m; Built-in incremental encoder 8192ppr; Rated current 11.7A.

YASKAWA YPHT31600

Product Name: Servo Drive Power Supply Board Product Introduction: Yaskawa servo system dedicated power supply board, provide stable power conversion and power distribution for servo drive internal control circuit and power loop. Technical Specifications: Industrial power board design, match Yaskawa servo drive series; with overvoltage, undervoltage and overcurrent detection circuit.

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)

YOUYAN QJH-25WL

  • Product Name:​ High-Pressure Ball-Type Shutoff Valve (QJH-25WL)
  • Product Introduction:​ Manual high-pressure ball core shutoff valve from the QJH series, intended for on/off isolation in hydraulic and fluid power systems rather than throttling service.

YUKEN AME-D-10-100-20

Product Overview

AME-D-10-100-20 is a cabinet-mounted analog power amplifier dedicated to driving 10 Ω resistance electro-hydraulic proportional valves. It converts standard industrial 0–10 V DC analog command signals into regulated bi-directional output current to precisely control proportional valve spool position for hydraulic pressure, flow, and directional control loops.

ZIEHL MSF-220-SE

Product Brief:​ Monitors up to two independent strings of PTC thermistors (DIN 44081/44082) embedded in motors, dry-type transformers, or bearings. If any PTC resistance exceeds the trip threshold (> 1,800 Ω typical, switching point < 4,000 Ω) the relay drops out and triggers alarm/shutdown. Includes power-on delay to suppress nuisance tripping when supply is applied (transformer secondary used as supply). Two independently configurable changeover relays for pre-alarm and trip/off functions.

ZYGO 4205

Product Name

  • Official full name: ZYGO Model 4205 4-Inch Standard Fizeau Laser Interferometer System
  • Short trade name: ZYGO 4205 Laser Interferometer
  • Product category: Precision Optical Wavefront & Surface Metrology Instrument

Zygo 7702

Product Name

  • Full official product name: ZYGO ZMI™ 7702 Dual-Frequency HeNe Heterodyne Laser Head (Displacement Measuring Interferometer Laser Source)
  • Short model designation: ZYGO 7702
  • Full part number prefix: 8070-0102-XX (suffix digits define sub-variant specifications)

ZYGO 7702 BH5‑6314

Product Name: ZYGO 7702 Interferometer Optical Assembly BH5‑6314 Product Introduction: Precision optical component designed for ZYGO laser interferometer systems, deployed for non‑contact surface profile measurement, flatness detection and optical metrology in industrial precision inspection. Technical Specifications: Matches ZYGO 7702 host system; optical path alignment tolerance at sub‑micron level; compatible with visible‑band laser source; industrial grade optical coating.

ZYGO 8070‑0279‑01

Product Name: ZYGO 8070‑0279‑01 Interferometer Spare Optical Module Product Introduction: Original spare optical module for ZYGO interferometer metrology system, used to replace damaged optical units to restore measurement performance of host equipment. Technical Specifications: Matches ZYGO host optical parameter index; standard optical interface size; meets factory wavefront error specification.

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.

ZYGO ZMI-4004

Technical Specifications
  • Resolution: 0.15 nm
  • Velocity: 2.55 m/sec
  • Number of Axes: 4 axes per board
  • Data Rate: 10 MHz
  • Connection Types: ST fiber optic and HSSDC electrical connections