Shop

Technical Specifications – Module type : half-height, dual-channel, occupies one front slot – Input signal : proximity probe or magnetic pickup – Non-isolated I/O : +0.8 V to –21 V – Isolated I/O : +5 V to –11 V – Input impedance : ≥ 21.8 kΩ – Output signal : digital keyphasor pulse, buffered coax on front & Euro connector on rear – Speed range : 0 – 99 999 RPM (passive mag pickup requires >200 RPM) – Accuracy : ±0.05 % – Resolution : 0.1 RPM – Sampling rate : 1 kHz per channel – Phase shift : <1° typical (non-isolated), <3° isolated – Output impedance : ≤504 Ω – Power supply : –24 Vdc from rack back-plane, 40 mA max per channel – Power consumption : 3.2 W typical – On-board memory : 32-bit RISC processor, flash for firmware & event log – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : – Non-isolated : –30 °C to +65 °C – Isolated : 0 °C to +65 °C – Storage temperature : –40 °C to +85 °C – Humidity : 95 % RH non-condensing – Shock / vibration : 15 g 11 ms; 2 g 5 – 500 Hz operational – Dimensions : 119.9 mm × 24.4 mm × 256.5 mm – Weight : 0.34 kg (0.76 lb) – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS, ABS marine

Technical Specifications – Module type : half-height, dual-channel, occupies one front slot – Input signal : proximity probe or magnetic pickup – Non-isolated I/O : +0.8 V to –21 V – Isolated I/O : +5 V to –11 V – Input impedance : ≥ 21.8 kΩ – Output signal : digital keyphasor pulse, buffered coax on front & Euro connector on rear – Speed range : 0 – 99 999 RPM (passive mag pickup requires >200 RPM) – Accuracy : ±0.05 % – Resolution : 0.1 RPM – Sampling rate : 1 kHz per channel – Phase shift : <1° typical (non-isolated), <3° isolated – Output impedance : ≤504 Ω – Power supply : –24 Vdc from rack back-plane, 40 mA max per channel – Power consumption : 3.2 W typical – On-board memory : 32-bit RISC processor, flash for firmware & event log – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : – Non-isolated : –30 °C to +65 °C – Isolated : 0 °C to +65 °C – Storage temperature : –40 °C to +85 °C – Humidity : 95 % RH non-condensing – Shock / vibration : 15 g 11 ms; 2 g 5 – 500 Hz operational – Dimensions : 119.9 mm × 24.4 mm × 256.5 mm – Weight : 0.34 kg (0.76 lb) – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS, ABS marine

Technical Specifications – Module format : full-height, single-slot, front plug-in – Relay channels : 4 × SPDT (Form C) – Contact rating : 5 A @ 24 Vdc / 120 Vac (resistive) – Maximum switching voltage : 250 Vac / 30 Vdc – Operate time : ≤ 10 ms (typical) – Isolation : 1 500 Vrms coil-to-contact & channel-to-ground – Power draw : 5 W max (24 Vdc from rack back-plane) – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : –40 °C to +85 °C – Storage temperature : –40 °C to +85 °C – Humidity : 5 % – 95 % RH non-condensing – Shock / vibration : 15 g ½-sine 11 ms; 2 g 5-500 Hz operational – Dimensions : 15.5 cm × 10.2 cm × 2.5 cm – Weight : 0.5 kg – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS

Technical Specifications – Module format : full-height, single-slot, front plug-in – Relay channels : 16 × SPDT (Form C) – Contact rating : 5 A @ 24 Vdc / 120 Vac (resistive) – Maximum switching voltage : 250 Vac / 30 Vdc – Operate time : ≤ 10 ms (typical) – Isolation : 1 500 Vrms coil-to-contact & channel-to-ground – Power draw : 24 Vdc from rack back-plane, 5.8 W max – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : –40 °C to +82 °C – Storage temperature : –40 °C to +85 °C – Humidity : 95 % RH non-condensing – Shock / vibration : 15 g ½-sine 11 ms; 2 g 5-500 Hz operational – Dimensions : 120 mm × 240 mm × 55 mm – Weight : 0.5 kg (1.1 lb) – Connector : M12 circular (IP67) – Housing : die-cast aluminium alloy – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS

Technical Specifications – Module format : full-height, single-slot, front plug-in – Relay channels : 16 × SPDT (Form C) – Contact rating : 2 A @ 240 Vac (resistive) – Maximum switching voltage : 240 Vac / 30 Vdc – Operate time : ≤ 10 ms (typical) – Isolation : 1 500 Vrms coil-to-contact & channel-to-ground – Power draw : 24 Vdc from rack back-plane, 5.8 W max – Output frequency : 50 – 60 Hz – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : –20 °C to +70 °C – Storage temperature : –40 °C to +85 °C – Humidity : 95 % RH non-condensing – Shock / vibration : 15 g ½-sine 11 ms; 2 g 5-500 Hz operational – Dimensions : 26 mm × 252 mm × 241 mm – Weight : 0.7 kg – Connector : M12 circular (IP67) – Housing : die-cast aluminium alloy – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS

Technical Specifications – Channels : 4, fully isolated, independent configuration – Input type : eddy-current or seismic (accelerometer / velocity) – Input impedance : 10 kΩ minimum – Full-scale range : 0 – 10 mm pk-pk or 0 – 50 g (software selectable) – Frequency response : 0.5 Hz – 10 kHz (–3 dB) – Resolution : 16-bit ADC, <0.02 % non-linearity – Accuracy : ±0.33 % of full scale @ 25 °C – Internal barriers : 91 Ω series resistance, 50 V clamp per channel; meets Entity parameters for Zone 0/1 sensor circuits – Terminations : rising-clamp screw terminals accept 0.2 – 2.5 mm² wire – Power draw : 24 Vdc from rack back-plane, 40 mA typical per channel – Isolation : 1 500 Vac channel-to-ground, 500 V channel-to-channel – MTBF : >300 000 h @ 45 °C per MIL-HDBK-217F – Operating temperature : –40 °C to +85 °C – Storage temperature : –55 °C to +125 °C – Humidity : 5 % – 95 % RH non-condensing – Shock / vibration : 15 g ½-sine 11 ms; 2 g 5 – 500 Hz operational – Dimensions : 24 cm × 2.4 cm × 16 cm (9.5" × 0.96" × 6.3") – Weight : 0.46 kg (1.0 lb) – Agency approvals : CE, UL/cUL Class I Div 2, ATEX/IECEx Zone 2, RoHS, ABS marine