SAACKE HMI10-M REV203
Manufacturer: SAACKE GmbH (Germany)
Product Brief: Rugged, application-specific HMI terminal integrated with SAACKE combustion management controllers (BMC / SBC series). Provides graphical visualization, parameter setting, alarm annunciation, and trend recording for marine and industrial boiler plants. REV203 indicates third hardware/firmware revision with enhanced connectivity and cybersecurity features.
HITACHI H-7626-35C
Manufacturer: Hitachi, Ltd. — Industrial Systems Division (Japan)
Product Brief: Legacy spare printed circuit board used within Hitachi EH / H- series distributed control systems (DCS) or programmable controllers. Typically functions as a signal conditioning, communication, or I/O interface card inside a Hitachi system rack. Exact function depends on the host system generation (often found listed as DCS spare for Hitachi LANBOX / μΣ100 compatible racks).
Eaton HLDB3600FT33W
Product Name: Eaton / Cutler-Hammer HLDB Series Fixed-Mount Air Circuit Breaker with Micrologic 3.0 Trip Unit
Manufacturer: Eaton Corporation (formerly Cutler-Hammer)
Product Brief: Heavy-duty low-voltage air circuit breaker (ACB) intended for main incoming lines, bus ties, or large feeder circuits in industrial/commercial switchgear. Rated for 3600 A continuous with electronic microprocessor-based trip unit for selective coordination.
HIMA H6200A
Manufacturer: HIMA Paul Hildebrandt GmbH & Co KG (Germany)
Product Brief: The H6200A is the central CPU module of the HIMA H6000 or HIMatrix safety instrumented system (SIS), designed for high-integrity emergency shutdown (ESD), fire & gas (F&G), and burner management (BMS) applications. It executes certified safety logic with continuous self-diagnostics and fail-safe behavior.
Emerson DeltaV KJ4001X1-CE1
Product Name: Emerson DeltaV KJ4001X1-CE1 Series 2 I/O Carrier (Baseplate / Terminal Block Carrier)
Product Introduction:
The KJ4001X1-CE1 is a DeltaV Series 2 I/O carrier (sometimes called baseplate or mid-size carrier) that mechanically houses up to eight DeltaV Series 2 I/O or communication modules and provides the electrical backplane (LocalBus) connection between modules and the DeltaV controller. It also supplies bussed field power distribution to the mounted modules.
Emerson DeltaV KJ3243X1-BA1
Product Name: Emerson DeltaV KJ3243X1-BA1 Series 2 Profibus DP (Distributed Peripheral) Communication Card
Product Introduction:
The KJ3243X1-BA1 is a DeltaV Series 2 local bus communication interface card that enables the DeltaV controller to communicate with Profibus DP slave devices (e.g., remote I/O, variable frequency drives, smart actuators) via an RS-485 network.
Emerson DeltaV KJ3223X1-BA1
Product Name: Emerson DeltaV KJ3223X1-BA1 Series 2 2-Wire Analog Input Module, 16-Channel, 4–20 mA with HART
Product Introduction:
The KJ3223X1-BA1 is a high-density, 16-channel, 2-wire 4–20 mA analog input (AI) module for the DeltaV system. It receives current-loop signals from field transmitters and optionally communicates with HART-enabled devices for digital parameter access and diagnostics.
Emerson DeltaV KJ2222X1-BA1
Product Introduction:
The KJ2222X1-BA1 is a DeltaV Series 2 I/O module for use in Emerson DeltaV distributed control systems. Depending on carrier and terminal block combination it functions as a 16-channel 24 V DC discrete (sinking/sourcing) output module or specialty I/O. It interfaces field devices to the DeltaV controller via the local bus and supports online module replacement.
Pepperl+Fuchs KFD0-TR-EX1
Product Introduction:
The KFD0-TR-EX1 is an isolated barrier that accepts a resistance signal from a 2- or 3-wire Pt100 RTD located in the hazardous area and converts it linearly to a 4–20 mA current signal transmitted to the safe-area control system. It is loop-powered from the safe-area side and includes sensor-break detection.
Pepperl+Fuchs KFD2-STC4-1
Product Name: Pepperl+Fuchs KFD2-STC4-1 1-Channel Intrinsically Safe Analog Input Isolator with HART Transparency
Product Introduction:
The KFD2-STC4-1 is a loop-powered isolated barrier that transfers a 4–20 mA signal from a 2-wire smart transmitter in the hazardous area to the safe area, while providing full bidirectional transparency for HART digital communication. It requires no external auxiliary power — it is powered from the control-side loop.
KUKA KCP2 00-130-547
Product Introduction:
The KUKA KCP2 00-130-547 is the standard handheld operator panel (teach pendant) for KUKA robot controllers KR C2, KR C2 ed05, and KR C3. It provides the human-machine interface for robot programming, jogging (manual movement), program editing, I/O monitoring, and emergency stop functions. Some references also note compatibility with early KR C4 Compact in specific retrofits, but primary target is KR C2/C3.
Pepperl+Fuchs KCD2-SR-EX2
Product Introduction:
The KCD2-SR-EX2 is a DIN-rail mounted isolated barrier for connecting NAMUR proximity switches or dry contacts from hazardous areas (Zone 0/1) to a safe-area control system. It energizes relay contact outputs in the non-hazardous area corresponding to the field switch state and provides Line Fault Detection (LFD).
