Show sidebar
Show 9 12 18 24
Clear filters

ABB 1SAP140500R3260 L0864340.EC581-ARCNET Power Module

Technical Specifications
  • Power Supply: It is powered by 24VDC.
  • Memory: Equipped with 256KB of memory.
  • Communication Interfaces: It has an ARCNET interface for fast data transfer between devices. In addition, it is equipped with two RS232/485 interfaces for connecting other devices.
  • Expansion Storage: There is an SD card slot for expanding storage space.
Read more
Quick view

ABB 1SAP240500R0001 – DC523 Digital Configurable I/O Module

Technical Specifications:
  • Rated current (In): 630 A
  • Rated operational voltage (Ue): 690 V AC at 50/60 Hz
  • Rated insulation voltage (Ui): 1000 V
  • Breaking capacity (Icu) at 415 V AC: 65 kA
  • Number of poles: 4
  • Trip unit type: Micrologic 5.2 electronic trip unit, providing precise protection with adjustable settings for overload and short-circuit protection
  • Mounting type: Fixed or withdrawable versions available, suitable for both fixed panels and switchgear applications
Read more
Quick view

ABB 1TGB302003R0003 Industrial Gateway Module

Technical Specifications Basic Parameters Model: 1TGB302003R0003 Brand: ABB Dimensions: 240mm x 160mm x 64mm Weight: 1.5kg Protection Level: IP30 Electrical Parameters Power Supply Voltage: 24V DC Power Consumption: Maximum 20W Data Transmission Rate: Up to 100Mbps I/O Points: 16 input points and 16 output points Environmental Parameters Operating Temperature Range: -40°C to 70°C Storage Temperature Range: -40°C to 85°C Humidity: 5% to 95% (non-condensing)
Read more
Quick view

ABB 1TGB302004R5003

  • Rated Current: 2000A
  • Rated Voltage: 690V
  • Current Rating: 30A
  • Voltage Rating: 400V AC
  • Protection Level: IP20
  • Operating Temperature Range: -20°C to 70°C
  • Dimensions: 91.44 mm (net depth/width) × 243.84 mm (height) × 190.5 mm (net height)
  • Weight: 0.431 kg
  • Connection Capacity: Supports up to seven S800 cluster modems, with each modem supporting twelve S800 I/O modules.
  • Communication Interface: Connected to the Symphony Plus controller via ModuleBus, supporting both digital and analog signal types.
Read more
Quick view

ABB 1TGE120011R1000

Technical Specifications
  • Dimensions: 53x125x250 mm
  • Weight: 0.7 kg
  • Communication Interfaces: The base plate of the controller has two RJ45 Ethernet ports (CN 1, CN 2) and two RJ45 serial ports (COM 3, COM 4). One of the serial ports (COM 3) is an RS - 232C port with modem control signals, and the other port (COM 4) is isolated.
  • CPU Board: Contains the microprocessor and RAM memory, a real - time clock, LED indicators, an in - it push button, and a compact flash interface.
Read more
Quick view

ABB 1TGE120021R0610

Technical Specifications
There is no detailed technical specification information available in the current search results.
Read more
Quick view

ABB 216AB61 Digital Control Module (Procontrol Series)

  • Electrical Parameters
    • Input voltage range: 20-30V DC, and some models support a wider range of 9-36V DC.
    • Output voltage range: 115-230V AC.
    • Rated output current: 6A.
    • Efficiency: Over 90%.
    • Power consumption: Less than 10W.
    • Communication interfaces: Supports general communication protocols such as Modbus and Profibus.
    • Number of channels: Can support 16 or more digital I/O channels depending on the model.
  • Mechanical Parameters
    • Dimensions: 100mm x 65mm x 25mm (some models have different dimensions, such as 202mm x 290mm x 209.3mm, 202mm x 244mm x 108.7mm, etc.).
    • Weight: 200g.
    • Protection level: IP65.
Read more
Quick view

ABB 216VC62A HESG324442R13 Digital Input Module

Technical Specifications
 
  • Input Channels: 16 independent digital input channels
  • Input Signal Type: Dry contact (NO/NC) or voltage signal
  • Input Voltage Range: 24 VDC (nominal); 19.2 VDC to 30 VDC (operating range)
  • Input Current: 6 mA typical at 24 VDC (per channel)
  • Input Response Time: ≤ 1 ms (for signal edge detection)
  • Isolation:
    • Channel-to-channel isolation: 500 VAC (rms) for 1 minute
    • Channel-to-backplane isolation: 1500 VAC (rms) for 1 minute
  • Insulation Resistance: ≥ 100 MΩ (at 500 VDC, between isolated circuits)
  • Power Supply: Derived from the Advant OCS / MasterPiece system backplane; 5 VDC (from system rack)
Read more
Quick view

ABB 347543 (115VAC Rated Input) Industrial Control Relay / Auxiliary Relay

Technical Specifications

  • Electrical Parameters:
    • Input (Coil):
      • Rated voltage: 115VAC (50/60 Hz, dual-frequency compatible)
      • Coil power consumption: 5VA (typical, at rated voltage)
      • Coil resistance: 2.5kΩ (at 25°C, measured value)
      • Pull-in voltage: ≤85% of rated voltage (≤97.75VAC)
      • Release voltage: ≥10% of rated voltage (≥11.5VAC)
    • Output (Contacts):
      • Contact configuration: 2 Form C (Changeover) contacts (1 Normally Open (NO) + 1 Normally Closed (NC) per pole)
      • Rated contact current: 10A (resistive load, AC-15) at 250VAC; 5A (inductive load, AC-1) at 250VAC
      • Maximum switching voltage: 250VAC / 30VDC
      • Maximum switching power: 2500VA (AC) / 150W (DC)
      • Contact material: Silver-nickel (AgNi) alloy (for low contact resistance and high arc resistance)
Read more
Quick view

ABB 3ADT220090R0003 SDCS-POW-1

Technical Specifications

  • Input Voltage:
    • AC Input: 100 V AC to 240 V AC (wide-range, 50/60 Hz)
    • Input Voltage Tolerance: ±10% of rated input
    • Input Current: 2 A (max) at 100 V AC; 1 A (max) at 240 V AC
  • Output Voltage & Current:
    • DC Output: 24 V DC (regulated, fixed output)
    • Output Current: 5 A (continuous rating); 7 A (peak rating, 10 seconds max)
    • Output Voltage Regulation: ±0.5% (load regulation); ±0.2% (line regulation)
    • Ripple & Noise: ≤ 50 mV (peak-to-peak) at full load
  • Efficiency & Power:
    • Typical Efficiency: 85% at full load (24 V DC, 5 A)
    • Maximum Power Output: 120 W (24 V DC × 5 A)
Read more
Quick view

ABB 3ASC25H204 DAPU100 Digital I/O Processing Unit

Technical Specifications

  • I/O Channel Parameters
    • Digital input channels: 16 channels (dry contact input; compatible with NPN/PNP logic).
    • Digital output channels: 16 channels (relay output; SPDT—Single Pole Double Throw configuration).
    • Input voltage range (digital inputs): 24V DC ± 20%.
    • Output voltage rating (digital outputs): 250V AC / 30V DC.
    • Output current rating (digital outputs): 5A per channel (resistive load); 2A per channel (inductive load).
    • Input response time: ≤ 1ms (for signal detection).
    • Output switching time: ≤ 10ms (for relay actuation).
Read more
Quick view

ABB 3ASC25H204 DAPU100 Digital Input Module

Technical Specifications

  • Module Type: 16-channel digital input module
  • Input Signal Type: Dry contact (NO/NC) or voltage input (sourcing/sinking)
  • Number of Input Channels: 16 independent channels (grouped into 2 banks of 8)
  • Input Voltage Range: 24V DC (nominal); 19.2V DC to 30V DC (operating range)
  • Input Current: 3mA to 10mA per channel (at 24V DC)
  • Input Response Time: <1ms (typical); configurable up to 100ms (for noise filtering)
  • Isolation:
    • Channel-to-channel: 500V AC (reinforced insulation, 1 minute)
    • Input to backplane: 2.5kV AC (reinforced insulation, 1 minute)
  • Noise Immunity: ±2kV (ESD, IEC 61000-4-2); ±1kV (EFT, IEC 61000-4-4)
  • Power Supply: Derived from S800 I/O backplane (no external power required)
  • Operating Temperature Range: -25°C to +60°C (standard); -40°C to +70°C (extended, with derating)
Read more
Quick view