Eaton HLDB3600FT33W
Product Name: Eaton / Cutler-Hammer HLDB Series Fixed-Mount Air Circuit Breaker with Micrologic 3.0 Trip Unit
Manufacturer: Eaton Corporation (formerly Cutler-Hammer)
Product Brief: Heavy-duty low-voltage air circuit breaker (ACB) intended for main incoming lines, bus ties, or large feeder circuits in industrial/commercial switchgear. Rated for 3600 A continuous with electronic microprocessor-based trip unit for selective coordination.
HIMA H6200A
Manufacturer: HIMA Paul Hildebrandt GmbH & Co KG (Germany)
Product Brief: The H6200A is the central CPU module of the HIMA H6000 or HIMatrix safety instrumented system (SIS), designed for high-integrity emergency shutdown (ESD), fire & gas (F&G), and burner management (BMS) applications. It executes certified safety logic with continuous self-diagnostics and fail-safe behavior.
Emerson DeltaV KJ4001X1-CE1
Product Name: Emerson DeltaV KJ4001X1-CE1 Series 2 I/O Carrier (Baseplate / Terminal Block Carrier)
Product Introduction:
The KJ4001X1-CE1 is a DeltaV Series 2 I/O carrier (sometimes called baseplate or mid-size carrier) that mechanically houses up to eight DeltaV Series 2 I/O or communication modules and provides the electrical backplane (LocalBus) connection between modules and the DeltaV controller. It also supplies bussed field power distribution to the mounted modules.
Emerson DeltaV KJ3243X1-BA1
Product Name: Emerson DeltaV KJ3243X1-BA1 Series 2 Profibus DP (Distributed Peripheral) Communication Card
Product Introduction:
The KJ3243X1-BA1 is a DeltaV Series 2 local bus communication interface card that enables the DeltaV controller to communicate with Profibus DP slave devices (e.g., remote I/O, variable frequency drives, smart actuators) via an RS-485 network.
Emerson DeltaV KJ3223X1-BA1
Product Name: Emerson DeltaV KJ3223X1-BA1 Series 2 2-Wire Analog Input Module, 16-Channel, 4–20 mA with HART
Product Introduction:
The KJ3223X1-BA1 is a high-density, 16-channel, 2-wire 4–20 mA analog input (AI) module for the DeltaV system. It receives current-loop signals from field transmitters and optionally communicates with HART-enabled devices for digital parameter access and diagnostics.
Emerson DeltaV KJ2222X1-BA1
Product Introduction:
The KJ2222X1-BA1 is a DeltaV Series 2 I/O module for use in Emerson DeltaV distributed control systems. Depending on carrier and terminal block combination it functions as a 16-channel 24 V DC discrete (sinking/sourcing) output module or specialty I/O. It interfaces field devices to the DeltaV controller via the local bus and supports online module replacement.
Pepperl+Fuchs KFD0-TR-EX1
Product Introduction:
The KFD0-TR-EX1 is an isolated barrier that accepts a resistance signal from a 2- or 3-wire Pt100 RTD located in the hazardous area and converts it linearly to a 4–20 mA current signal transmitted to the safe-area control system. It is loop-powered from the safe-area side and includes sensor-break detection.
Pepperl+Fuchs KFD2-STC4-1
Product Name: Pepperl+Fuchs KFD2-STC4-1 1-Channel Intrinsically Safe Analog Input Isolator with HART Transparency
Product Introduction:
The KFD2-STC4-1 is a loop-powered isolated barrier that transfers a 4–20 mA signal from a 2-wire smart transmitter in the hazardous area to the safe area, while providing full bidirectional transparency for HART digital communication. It requires no external auxiliary power — it is powered from the control-side loop.
KUKA KCP2 00-130-547
Product Introduction:
The KUKA KCP2 00-130-547 is the standard handheld operator panel (teach pendant) for KUKA robot controllers KR C2, KR C2 ed05, and KR C3. It provides the human-machine interface for robot programming, jogging (manual movement), program editing, I/O monitoring, and emergency stop functions. Some references also note compatibility with early KR C4 Compact in specific retrofits, but primary target is KR C2/C3.
Pepperl+Fuchs KCD2-SR-EX2
Product Introduction:
The KCD2-SR-EX2 is a DIN-rail mounted isolated barrier for connecting NAMUR proximity switches or dry contacts from hazardous areas (Zone 0/1) to a safe-area control system. It energizes relay contact outputs in the non-hazardous area corresponding to the field switch state and provides Line Fault Detection (LFD).
HIMA K9203 996920302
Product Introduction:
The HIMA K9203 (Order No. 996920302) is a high-reliability safety controller designed for critical process safety applications. It executes safety logic for Emergency Shutdown (ESD), Burner Management (BMS), and other SIS functions. The unit supports Triple Modular Redundant (TMR) architecture in larger systems and is certified to SIL 3 / AK6 per IEC 61508.
HIMA K9202B
Product Introduction:
The HIMA K9202B is a safety-related terminal/interface module used in HIMA Safety Instrumented Systems (SIS). It provides a standardized field-wiring interface for HIMA F-series safety I/O modules via pre-fabricated system cables, enabling plug-and-play module replacement. In some configurations it also serves as a safety communication coupler supporting industrial Ethernet protocols for controller-to-controller or controller-to-host data exchange in SIL 3 environments.
