Vibro-Meter RPS6U 200-582-500-013 - Image 1
Vibro-Meter RPS6U 200-582-500-013 - Image 2
Click to enlarge
Vibro-Meter RPS6U 200-582-500-013
Vibro-Meter RPS6U 200-582-500-013 - Image 2
Kongsberg Maritime RMP201-8
Kongsberg Maritime RMP201-8
Back to products
Emerson Epro PR9268/203-000
Emerson Epro PR9268/203-000

Vibro-Meter RPS6U 200-582-500-013

  • Part Number:​ 200-582-500-013 (RPS6U PSU / rack assembly)
  • Function / Working Principle:​ Houses up to 6 Vibro-Meter signal conditioner / monitor cards (e.g. IOC4T, MPC4, AMC8) and provides regulated DC power (+5 V / ±12 V / +24 V depending on backplane) plus system alarm relays and bus communication to host machinery protection system (VM600 IPC / VIBRO-RACK).
Category:
Description
  • Input Power:​ 85–264 V AC or 110/220 V AC selectable; or 24 V DC option on some variants
  • Outputs:​ Regulated backplane voltages for installed cards; total power budget typically 60–150 W depending on card population
  • Alarm Contacts:​ Two or four independent relay outputs for system OK / fault / voting alarm
  • Communication:​ RS-232/485 or Ethernet to VM600 CPU for configuration & trending
  • Indicators:​ Power ON, System OK, Alarm 1/2 LEDs; per-slot activity (on some backplanes)
  • Mechanical:
    • Format:​ 19-inch rack-mount, 3U or 4U height, 6 slots (Euro-card 100×160 mm)
    • Depth:​ ≈ 250–300 mm
    • Weight:​ ≈ 3–5 kg (with PSU)
  • Environmental:
    • Operating Temp.:​ 0 °C to +55 °C (typical for electronics rack)
    • Humidity:​ 5–95 % non-condensing
    • EMC:​ IEC 61000-6-2/ -6-4
  • Application:​ Turbine & compressor vibration monitoring, rotating machinery protection in power gen, oil & gas — part of Vibro-Meter VM600 Machinery Protection & Condition Monitoring System.
  • Installation:​ Secure in 19″ cabinet; install monitor cards per slot assignment; connect earth ground to rack chassis; verify PSU selector before energizing; configure alarm logic in VM600 software.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Vibro-Meter RPS6U 200-582-500-013”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Vibro-Meter MPC4 VM600 200-510-076-114

Product Brief:​ The MPC4 is a plug-in 6U Eurocard that acquires up to four dynamic (AC) signals from vibration/position sensors (accelerometers, velocity pickups, eddy-current probes) plus two tacho/keyphasor inputs. It performs digital filtering (high-pass / low-pass / band-pass, 6–60 dB/octave, software-configurable), integration/differentiation, true RMS / peak / peak-peak calculation, order tracking, and compares against programmable Alert/Danger setpoints. Communicates with VM600 IOC4T/IOT modules via backplane for alarm relays, analog outputs, and host communication. Fully compliant with API 670.
Read more
Quick view

Vibro-Meter SIM-275A 200-582-500-013

Technical Specifications
  • Input Voltage: Supports redundant power inputs for enhanced reliability.
  • Output Voltage: Delivers stable 24 VDC to downstream modules.
  • Power Capacity: Designed to handle the electrical demands of multiple monitoring units simultaneously.
  • Operating Temperature: -10°C to +40°C (14°F to 104°F).
  • Storage Temperature: -20°C to +85°C (-4°F to 185°F).
  • Dimensions: Compact form factor for integration into standard VM600 racks.
  • Weight: Lightweight yet robust construction for ease of installation.
Read more
Quick view

Vibro-Meter VC-920

Manufacturer:​ Brüel & Kjær Vibro (formerly Vibro-Meter / Schenck)
Product Brief:​ A compact, DIN-rail or panel-mountable single-channel vibration monitor for bearing housing and casing vibration, accepting acceleration or velocity sensor inputs and providing alarm relays, analog output, and buffered dynamic signal.
Read more
Quick view

Vibro-Meter VM-3024H

Product Overview
The VM-3024H is a high-reliability DC power supply module designed for Vibro-Meter's vintage VM-3 or VM600 racks, providing stabilized 24 V DC to power transducer electronics, signal conditioners, and system modules. Often used in redundant pairs for continuous availability.
Read more
Quick view

Vibro-Meter VM-701BNB1TRPTB1

Product Overview
The VM-701 (and variants such as BNB1TRPTB1) is typically a VM600 rack power supply unit (RPS6U type) or a combined CPU/Communications module designation within the VM600 family. The RPS6U supplies regulated +24 V DC and ±15 V / +5 V to the VM600 backplane. When specified as a CPU variant (CPUM + IOCN pair), it provides rack management, Ethernet/serial communications, and data buffering.
Read more
Quick view

Vibro-Meter VM-742B1-1

Product Overview
The VM-742 series is a 2-wire loop-powered vibration/temperature transmitter compatible with Vibro-Meter's sensor portfolio (typically IEPE accelerometers or velocity pickups). It conditions the dynamic signal and outputs a proportional 4–20 mA current representing overall vibration (RMS or peak) for direct connection to a DCS or PLC. Often used in API 670-compliant machinery health monitoring where a full rack system is not required.
Read more
Quick view

Vibro-Meter VM600 MPC4 (Models 200-510-071-113 & 200-510-111-034)

Technical Specifications:
  • The MPC4 module is specifically designed for signal processing and analysis, offering high-resolution data acquisition capabilities.
  • Capable of handling multiple channels of dynamic signals (such as acceleration, velocity, or displacement) and static signals (like temperature and pressure).
  • Features a wide frequency range suitable for various types of machinery, ensuring accurate monitoring across different operational conditions.
  • Equipped with advanced diagnostic tools that can analyze collected data to identify potential issues before they lead to failures.
  • Supports integration with other modules within the VM600 system for comprehensive monitoring solutions.
Read more
Quick view

Vibro-Meter VM600 RLC16 200-570-000-111

Product Overview
The RLC16 is a relay expansion module for the VM600 Machinery Protection System (MPS). It receives alarm/danger logic from MPC4 protection cards or CPUM and drives 16 independently configurable SPDT electromechanical relays for trip, shutdown (ESD), or annunciation. The -101-015 variant carries SIL 2 certification per IEC 61508. Hot-swappable in VM600 ABE04x or ABE056 racks.
Read more
Quick view