Rexroth HMS011N-W0070-A-07-NNNN
Product Name
IndraDrive M Single-Axis Servo Inverter Module
Product Introduction
This product is a high-power single-axis servo inverter module from Bosch Rexroth’s IndraDrive M series. It functions as a power amplification unit that works with a dedicated control card to form a complete servo drive system, and supports DC bus power sharing architecture for flexible multi-axis system integration.
BENDER IRDH375B-435
Product Name: Insulation Monitoring Device
Product Description: BENDER IRDH375B-435 is a variant model of IRDH375 insulation monitor for unearthed IT power networks. It monitors insulation resistance between active conductors and earth, provides visual and relay alarm when insulation degradation occurs, with factory preset configuration for specific application requirements.
BENDER IRDH375
Product Name: Insulation Monitoring Device
Product Description: BENDER IRDH375 is an insulation monitoring device (IMD) for unearthed IT power systems. It continuously monitors insulation resistance between live conductors and protective earth, detects insulation faults and gives early warning before dangerous earth faults occur.
TeleFrank TZP80-2405S
METSO IOP351
METSO IOP331
Product Name: Analogue Input Module
Product Description: Metso IOP331 is an analogue input module for Metso DNA distributed control system. It receives 4-20 mA analogue measurement signals from field transmitters and converts analogue signals into digital values for the DCS controller.
Technical Specifications:
- Signal Type: Analogue input, 4-20 mA
METSO IOP320
Product Name: Digital Output Module
Product Description: Metso IOP320 is a discrete digital output module for the Metso DNA DCS platform. It outputs on/off control signals to drive field relays, solenoid valves and other binary actuators according to commands from the DCS controller.
Technical Specifications:
- Signal Type: Digital output
METSO IOP302
Product Name: Digital Input Module
Product Description: Metso IOP302 is a digital input module for Metso DNA distributed control system. It collects binary on/off status signals from field devices and transmits data to the DCS controller for process monitoring.
Technical Specifications:
- Signal Type: Digital input
DEIF IOM230
MYCOM IMS500-120S
Product Name: Stepper Motor Driver
Product Description: The MYCOM IMS500-120S is a high-performance microstepping stepper motor driver manufactured by MYCOM. It is designed to drive 2-phase stepper motors, delivering smooth motion, low vibration and high positioning accuracy for industrial motion control applications.
ProSoft ILX56-MM
Product Name: Multi-Master Communication Module
Product Description: The ILX56-MM is an in-chassis multi-master communications module designed for Rockwell Automation ControlLogix and CompactLogix PLC platforms. It enables multiple Modbus TCP/IP masters to communicate with slave devices concurrently, simplifying integration of Modbus field equipment into Allen‑Bradley control systems.
KUKA 1FK7101-5AZ91-1ZZ9-ZS07
Product Name: KUKA Robot Joint Permanent Magnet Synchronous Servo Motor
Product Introduction: The KUKA 1FK7101-5AZ91-1ZZ9-ZS07 (spare part number 00-119-767) is a dedicated permanent magnet synchronous servo motor for KUKA KR C4/C5 series robot joint drives. It integrates a multi-turn absolute value encoder and S07 electromagnetic holding brake, optimized for high-precision and high-dynamic robot motion control.
