GE

• Product Introduction: The IC695PSA040 is a 40-Watt universal power supply module for GE PACSystems RX3i controllers, converting 85-264 VAC or 100-300 VDC input into regulated +3.3 VDC, +5.1 VDC, and +24 VDC outputs. It powers RX3i backplane modules, CPU, I/O, and relay circuits, with front-panel LEDs for status monitoring, and works exclusively in RX3i universal backplanes (one module per backplane, no redundancy).
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Module Type: 40-Watt power supply module for RX3i PACSystem universal backplane

• Product Overview: A 2 - slot universal power supply module for GE PACSystems RX3i controllers, delivering three regulated DC outputs (+3.3 VDC, +5.1 VDC, +24 VDC relay) with a total output power of 40 Watts, and a maximum input power of 70 Watts at full load. It supports 85 - 264 VAC or 100 - 300 VDC input, operates on 47 - 63 Hz AC frequency, and is installed in the RX3i Universal Backplane. It offers comprehensive protection features and status LEDs, and is designed for non - redundant single - supply systems.
• Technical Specifications - Form Factor: 2 - slot module, weight 2.65 lbs (1.2 kg), shielded metal enclosure, dimensions 3.60 x 12.11 x 5.72 in (91.4 x 307.5 x 145.3 mm)

• Product Introduction: The IC695PSD040F is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features front-panel LED status indicators, an on/off switch with a protective cover, and supports daisy-chaining up to two units for expanded capacity, optimized for industrial environments with DC power infrastructure.
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
• Input Voltage (Nominal): 24 VDC

• Product Introduction: The IC695PSD140A is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC, +3.3 VDC, and +24 VDC outputs. It is built for load-sharing and redundancy setups, supports daisy-chaining up to four units, and powers RX3i CPU, I/O, communication, and relay modules in industrial DC power systems.
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Module Type: Single-slot 24 VDC input multipurpose power supply module for RX3i universal backplane

• Product Introduction: The IC695RMX128 is a single-slot reflective memory module for GE PACSystems RX3i universal backplanes, delivering 128 MB user memory for real-time data sharing across redundant CPU pairs and reflective memory networks. It uses 2.12 Gbaud fiber-optic links (LC connectors) for 2.1 GB/s deterministic data transfer, supports hot insertion/removal, dynamic packet sizing, and network error detection, enabling seamless failover and data synchronization in mission-critical industrial control systems.
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Module Type: Single-slot reflective memory module for RX3i redundant CPU systems and reflective memory networks

Product Overview The GE IC695SPF002 is a high-performance analog input/output (I/O) module designed for use in PLC (Programmable Logic Controller) systems, particularly within the GE PACSystems RX3i platform. It enables precise data acquisition and control by processing multiple analog signals, ensuring stable and efficient operation in complex industrial environments.