TRICONEX EM2291 Input Module
Technical Specifications
- Channels: Multiple input channels (specific configuration depends on model variant).
- Input Type: Supports digital and analog inputs (e.g., voltage, current, thermocouple, RTD signals).
- Signal Range: Compatible with standard industrial signal ranges (e.g., 4-20 mA, 0-10 V DC).
- Response Time: Fast response time for real-time monitoring (typically ≤ 5 ms).
- Power Consumption: Low power consumption, suitable for industrial applications.
- Operating Temperature: -20°C to +60°C.
- Storage Temperature: -40°C to +85°C.
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2 and other international standards.
TRICONEX EM2281 Safety Controller Module
Technical Specifications
- Redundancy Architecture: Triple Modular Redundant (TMR) for enhanced fault tolerance.
- Input/Output Channels: Supports a variety of I/O configurations, including digital and analog inputs/outputs, depending on the specific model and configuration.
- Communication Protocols: Modbus RTU/TCP, HART, and other industrial protocols for seamless integration with DCS and SCADA systems.
- Input Voltage: 24 V DC.
- Power Consumption: Approximately 20 W.
- Operating Temperature Range: 0°C to +60°C.
- Storage Temperature Range: -40°C to +85°C.
- Protection Class: IP20.
- Programming Software: TriStation 1131 for configuration and programming.
- Certifications: Compliant with IEC 61508 SIL 3, FM, ATEX, and other international safety standards.
TRICONEX DO3625A Digital Output Module
Technical Specifications
- Channels: 8 digital output channels
- Output Type: Switch-type outputs
- Output Current: 2 A per channel
- Load Voltage: 250 V AC/DC
- Response Time: ≤ 2 ms
- Power Consumption: ≤ 5 W
- Dimensions: 160 mm x 100 mm x 25 mm
- Redundancy: Triple Modular Redundant (TMR) design for enhanced fault tolerance
- Safety Certification: Compliant with SIL 3 safety integrity level requirements
TRICONEX DO9662-810 Digital Output Module
Technical Specifications
- Output Channels: 16 digital output channels
- Output Voltage: 24 VDC
- Output Current: Supports low-level effective (sink-type) outputs with a maximum of 0.5 A per channel
- Channel Isolation: Each channel is optically isolated from the system bus to prevent interference and ensure fault tolerance
- Response Time: Fast response time for real-time control applications (≤ 5 ms)
- Redundancy: Operates within Triconex's triple modular redundant (TMR) architecture for enhanced fault tolerance
- Status Monitoring: Supports per-channel diagnostics, including open-circuit and short-circuit detection
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -40°C to +85°C
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2 and other international standards
TRICONEX DO3401 Digital Output Module
Technical Specifications
- Output Channels: 32 digital output channels
- Output Type: 24 VDC, low-level effective (Sink-type output)
- Output Structure: Transistor output (NPN or PNP, depending on version)
- Output Capacity: Maximum 0.5 A per channel
- Output Voltage Range: 18–32 VDC (24 VDC recommended)
- Channel Isolation: Each channel is optically isolated from the system bus
- Response Time: ≤ 5 ms (channel delay)
- Short-Circuit Protection: Channel-level short-circuit and overcurrent protection
- Redundancy: Operates with Triconex's triple modular redundant (TMR) architecture for fault tolerance
- Status Monitoring: Supports per-channel status diagnostics, failure monitoring, and LED status indicators
- Module Identification: Supports automatic identification and configuration, with channel addresses assigned by the controller
TRICONEX DO3201 Digital Output Module
Technical Specifications
- Processor: 32-bit dual-core SIL3-rated safety CPU, 180 MHz clock speed
- Channels: 32 digital output channels per module
- Architecture: Triple Modular Redundant (TMR) for fault tolerance
- Output Current: Single-channel maximum 2 A
- Output Signal Range: Supports standard industrial voltage levels (e.g., 24 V DC)
- SOE Resolution: Supports Sequence of Events (SOE) with 1 ms timestamp accuracy
- Diagnostics: Real-time monitoring of channel status, including open-circuit, short-circuit, and overload fault detection
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -40°C to +85°C
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2
TRICONEX DO3626X Digital Output Module
Technical Specifications
- Output Channels: Multiple digital output channels (exact count varies by configuration).
- Output Voltage: 24 V DC (standard industrial voltage).
- Output Current: Supports a range of current levels to drive various loads (e.g., 100–400 A in some configurations).
- Redundancy: Triple Modular Redundant (TMR) architecture ensures fault tolerance, allowing continuous operation even if one channel fails.
- Response Time: Fast response time for real-time control applications (≤ 5 ms in typical configurations).
- Operating Temperature: -20°C to +60°C (industrial-grade temperature range).
- Storage Temperature: -40°C to +85°C.
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2 and other international standards.
Triconex DI3301 Digital Input Module
Technical Specifications
- Input Channels: 32 independent digital input channels, each with isolated electronics for fault tolerance.
- Input Voltage Range: 18–32 VDC (typically 24 VDC).
- Input Current: Maximum 6 mA per channel.
- Input Types: Supports dry contacts (e.g., limit switches) and wet contacts (e.g., relay outputs).
- Channel Isolation: Each input channel is isolated from the system bus to prevent interference.
- Redundancy: Triple Modular Redundant (TMR) architecture ensures continuous operation even if one channel fails.
- Response Time: ≤ 5 ms (including filtering).
- Diagnostics: Line monitoring, open-circuit detection, short-circuit detection, and self-diagnostics.
- Operating Temperature: -20°C to +60°C.
- Storage Temperature: -40°C to +85°C.
- Humidity Range: 5%–95% RH (non-condensing).
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2.
Triconex DI3201 Digital Input Module
Technical Specifications
- Processor: 32-bit dual-core safety CPU, 180 MHz clock speed
- Channels: 32 digital input channels per module
- Redundancy: Triple Modular Redundant (TMR) architecture for fault tolerance
- Input Signal Range: Compatible with standard digital voltage levels (e.g., 24 V DC)
- SOE Resolution: Supports Sequence of Events (SOE) with 1 ms timestamp accuracy
- Communication: Integrated into Triconex TMR systems via backplane or fieldbus interfaces
- Environmental: Operates in temperatures from -40°C to 70°C; IP20 protection rating
- Certifications: TÜV-certified for SIL 3 applications; compliant with IEC 61131-2
Triconex CM3201 Communication Module
Technical Specifications
- Power Supply: 24 V DC (input voltage range: 18 V DC to 30 V DC)
- Communication Interfaces: Ethernet (10 Mbps), RS-232, RS-485
- Redundancy Design: Triple-modular redundant (TMR) architecture for fault tolerance
- Isolation Voltage: 500 V DC
- Operating Temperature Range: -40°C to 70°C
- Dimensions: Approximately 22 cm × 16.9 cm × 4.4 cm
- Weight: Around 5 kg
- Certifications: TÜV-certified for SIL 3 applications (IEC 61508, IEC 61511)
Triconex CM01 Configurable Communication Interface Module
Technical Specifications
- Processor: Dual-core PowerPC, 800 MHz with floating-point coprocessor
- Memory: 512 MB RAM (ECC-protected), 64 MB non-volatile storage (32-bit CRC protection)
- Communication Protocols:
- Redundant 1000 Mbps Ethernet (supporting MODBUS-TCP and peer-to-peer communication)
- MODBUS-RTU (up to 4 DB9 serial ports per card)
- Firewall: Built-in firewall for enhanced cybersecurity
- Environmental:
- Operating temperature: 0°C to 60°C
- Storage temperature: -40°C to 85°C
- Humidity tolerance: 5% to 95% non-condensing
- Certifications: TÜV-certified for SIL 3 applications (IEC 61508, IEC 61511)
Triconex BI01 Bus Interface Module
Technical Specifications
- Interface Type: 3 groups of fiber-optic ports
- Transmission Distance: Up to 20 km
- Redundancy: Dual-channel redundant design for fault tolerance
- Compatibility: Integrates with Triconex Tricon, Tricon CX, and Trident safety systems
- Environmental Adaptability: Industrial-grade design suitable for harsh operating conditions
- Certifications: TÜV-certified for SIL 3 applications (IEC 61508, IEC 61511)
