GE IC9445C208
- Product Introduction: The IC9445C208 is a lever-actuated electromechanical limit switch from GE, designed to detect object position or presence in industrial settings. It triggers contact state changes when the lever is actuated, sending signals to control systems for machinery safety and automation. It features a general-purpose enclosure with NEMA 1, 3, 4, 13 ratings and a cable exit for secure field wiring, ensuring reliable operation in harsh industrial environments.
- Manufacturer: General Electric (GE) Industrial Solutions
- Product Category: Lever-Operated Limit Switch
GE IC3500A452L208
- Product Introduction: The IC3500A452L208 is a diode terminal block designed specifically for GE Bently Nevada's 3500 Series machinery protection and condition monitoring system. It integrates diodes into a terminal block assembly to provide reverse polarity protection, transient voltage suppression, and signal isolation for field wiring connected to 3500 Series modules. It serves as a critical interface component to ensure the integrity and reliability of input signals from transducers and sensors in industrial machinery monitoring applications.
- Manufacturer: GE Bently Nevada (now part of Baker Hughes, a GE company)
- Product Category: Diode Terminal Block for 3500 Series System
GE IC755CSW07CDA
- Product Introduction: The IC755CSW07CDA is a 7-inch color touchscreen HMI terminal from GE Fanuc's QuickPanel View series (now part of Emerson Automation). It integrates a high-resolution color display, multi-touch input, and diverse communication interfaces, running on Windows Compact Embedded 7 to deliver intuitive operator interaction, real-time data visualization, parameter configuration, and equipment control for industrial automation systems. Its fanless design and robust construction ensure reliable operation in harsh industrial environments.
- Manufacturer: GE Fanuc Automation (now part of Emerson Automation)
GE IC754VSF12CTD
- Product Introduction: The IC754VSF12CTD is a 12-inch industrial operator interface terminal from GE Fanuc's QuickPanel series (now part of Emerson Automation), integrating a color TFT touchscreen, keyboard, and diverse communication interfaces. It runs on Windows CE with Proficy View Machine Edition software, serving as a central HMI for industrial automation systems to enable real-time monitoring, parameter input, alarm management, and equipment control. It is built for harsh industrial environments with robust construction, wide temperature tolerance, and multiple protection features.
- Manufacturer: GE Fanuc Intelligent Platforms (now part of Emerson Automation)
- Display: 12-inch color TFT touchscreen; 800×600 pixels resolution; 16-bit color depth (65,536 colors); resistive touch input; backlit for visibility in low-light settings
GE IC752SPL013
- Product Introduction: The IC752SPL013 is a dedicated operator interface panel for GE EX2100 excitation control systems, serving as the primary HMI for generator excitation monitoring and control. It integrates a 16‑character alphanumeric display, 12‑button keypad, and multiple communication ports to enable parameter configuration, real‑time status visualization, alarm management, and manual control functions in power generation applications. It is engineered for harsh industrial environments, with an IP54/NEMA 4X enclosure rating and wide temperature tolerance.
- Manufacturer: GE Energy (General Electric Energy, now part of GE Vernova)
- Display: 16‑character alphanumeric backlit LCD; LED backlight for visibility in low‑light conditions
GE IC698PSA350
- Product Introduction: The IC698PSA350 is a 350W high-capacity power supply module designed for GE PACSystems RX7i PAC main racks, manufactured by GE Fanuc (now part of Emerson Automation). It plugs into slot 0 of the RX7i main rack, delivering +5 VDC, +12 VDC, and -12 VDC power to the backplane while providing logic-level sequencing signals for module operation. It supports wide input voltage ranges (85-264 VAC or 100-150 VDC), incorporates power factor correction, and features comprehensive protection mechanisms and status indicators.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Input Voltage Range: 85–264 VAC (47–63 Hz); 100–150 VDC
GE IC698ETM001
- Product Introduction: The IC698ETM001 is a dedicated Ethernet interface module for GE PACSystems RX7i controllers, equipped with a 200 MHz Ethernet processor and an internal switch. It enables high-speed TCP/IP communication with GE controllers, HMI/SCADA, and third‑party systems, supporting Ethernet Global Data (EGD), Service Request Transport Protocol (SRTP), and Modbus TCP. It features dual auto‑sensing Ethernet ports, a serial station manager port, and redundant IP addressing for network reliability, with comprehensive diagnostics and web‑based monitoring.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Ethernet Processor: 200 MHz dedicated Ethernet processor
GE IC698CPE040‑JP
- Product Introduction: The IC698CPE040‑JP is a single‑width, Japan‑specific CPU module for GE PACSystems RX7i PACs, powered by a 1.8 GHz Intel Pentium M microprocessor. It delivers high‑speed real‑time control for industrial processes, communicating with I/O and smart modules via a VME64 backplane. It integrates 64 MB battery‑backed RAM, 64 MB non‑volatile flash memory, dual 10/100BASE‑TX Ethernet ports, and three isolated serial ports (RS‑232/422/485). It supports IEC 61131‑3 programming languages, online logic modification, and firmware updates without hardware disassembly.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 1.8 GHz Intel Pentium M microprocessor, 32‑bit, supports floating‑point operations
GE IC698CPE030
- Product Introduction: The IC698CPE030 is a single‑width CPU module for GE PACSystems RX7i PACs, powered by a 600 MHz Intel Pentium M microprocessor. It provides high‑performance real‑time control, connecting to I/O and smart modules via a VME64 backplane. It features 64 MB battery‑backed RAM and 64 MB non‑volatile flash memory, dual 10/100BASE‑TX Ethernet ports, three isolated serial ports, and supports IEC 61131‑3 programming languages. It works with Series 90‑70 I/O modules and VME modules, and allows online logic modification without stopping the CPU, minimizing downtime in critical applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 600 MHz Intel Pentium M microprocessor, 32‑bit, supports floating‑point operations
GE IC698CPE010
- Product Introduction: The IC698CPE010 is a single‑width CPU module for GE PACSystems RX7i PACs, powered by a 300 MHz Celeron microprocessor. It delivers real‑time control for industrial machinery and processes, communicating with I/O/smart modules via a VME64 backplane. It includes 10 MB battery‑backed RAM, 10 MB non‑volatile flash memory, 2 Ethernet ports, 3 serial ports, and supports multiple IEC 61131‑3 programming languages, with web‑based monitoring and firmware updates without disassembly.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 300 MHz Intel Celeron microprocessor, 32‑bit, supports floating‑point operations
GE IC698CMX016
- Product Introduction: The IC698CMX016 is a reflective memory module for GE PACSystems RX7i PACs, enabling deterministic real-time data sharing across multiple CPUs and devices via fiber optic networks. It uses 16 MB reflective memory (SDRAM) to synchronize data between nodes with zero software latency, supporting VMIC5556-compatible reflective memory networks. Installed in RX7i main racks (slots 3/4), it connects via LC multi-mode fiber for daisy-chain or ring topologies, ideal for high-speed, deterministic control and data acquisition in industrial systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Reflective memory (Control Memory Xchange) module for PACSystems RX7i
GE IC698CHS117C
- Product Introduction: The IC698CHS117C is an 18‑slot wall‑mount I/O chassis for GE PACSystems RX7i PACs, built on a VME64 backplane with 4x standard VME bandwidth for high‑speed I/O throughput. It supports RX7i CPUs, RX7i I/O modules, Series 90‑70 I/O, and standard VME modules, with slot 0 dedicated to power modules, slot 1 for CPU (slot 2 used if dual‑width CPU with embedded Ethernet), and slots 3–18 for I/O. It features slot sensing, software configuration (no DIP switches/jumpers), and works with high‑power RX7i power supplies, delivering reliable, scalable I/O expansion for industrial control systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Chassis Type: 18‑slot wall‑mount I/O chassis for PACSystems RX7i
