GE IC695NIU001
- Product Introduction: The IC695NIU001 is a single - slot Ethernet Network Interface Unit for GE PACSystems RX3i controllers, enabling remote use of RX3i and Series 90 - 30 I/O on Ethernet networks. It works with the backplane - based Ethernet interface module IC695ETM001 for Ethernet communication, features two configurable serial ports (RS - 232/RS - 485), supports automatic data exchange via EGD, and offers local logic execution, data storage, and redundant controller compatibility.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet Network Interface Unit (ENIU) for RX3i PACSystem
GE IC695ETM001CA-ER
- Product Introduction: The IC695ETM001CA-ER is an enhanced dual-port Ethernet interface module for GE PACSystems RX3i controllers, offering advanced network redundancy, enhanced security, and extended temperature range, fully compatible with RX3i hot standby redundant systems (IC695RMX128) to ensure continuous network connectivity in mission-critical applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot Ethernet interface module for RX3i universal backplane
GE IC695ETM001
- Product Introduction: The IC695ETM001 is a single - slot, dual - port Ethernet interface module for GE PACSystems RX3i controllers, connecting the controller to 10/100 Mbps Ethernet networks, supporting TCP/IP, SRTP, Modbus TCP, and EGD protocols, and featuring an embedded switch with auto - negotiation, crossover detection, and a Station Manager port for online configuration and monitoring.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet interface module for RX3i backplane
GE IC695CRU320-EN
- Product Introduction: The IC695CRU320-EN is a high-performance hot standby redundant CPU module in GE PACSystems RX3i platform, built with 1 GHz Intel Celeron-M processor, supporting dual-slot installation, seamless switchover between master and standby CPUs within 3.133 ms to 1 logic scan, and providing 64 MB battery-backed RAM and 64 MB non-volatile flash memory, ideal for mission-critical industrial automation systems requiring uninterrupted operation.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 1 GHz Intel Celeron-M 32-bit microprocessor
GE IC695CPU320HU
- Product Introduction: The IC695CPU320HU is a high-performance 32-bit PAC CPU module from GE Fanuc (now part of Emerson Automation) belonging to the PACSystems RX3i platform, designed for real-time control of industrial machines, processes, and material handling systems, supporting dual backplane for PCI and Series 90-30 serial bus compatibility, and enabling easy migration of existing Series 90-30 I/O while integrating advanced RX3i I/O.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now under Emerson Automation)
- Processor: 1 GHz Intel Celeron-M 32-bit microprocessor
GE IS200SCSAS1ADB
- Product Overview: A high-density analog I/O module in GE’s Mark VIe control system series, designed for precise measurement and control in industrial automation applications. It features 16 analog input channels for sensor signals (4–20mA, ±10V, thermocouple, RTD) and 8 analog output channels for actuator control (4–20mA, ±10V). The module integrates signal conditioning, isolation, and diagnostic circuits, with a backplane interface for ISBus communication. Conformal coating ensures reliability in harsh environments, while hot-swappable design minimizes maintenance downtime.
- Technical Specifications - Analog Inputs: 16 channels, configurable as 4–20mA (sinking/sourcing), ±10V, thermocouple (Type J/K/T/E/R/S/B/N), RTD (PT100/PT1000, 2/3/4-wire); 16-bit resolution; 10Hz–1kHz sampling rate; 250VAC channel-to-channel isolation
GE IS200ESYSH1AAA
Product Overview: A core system interface board for GE’s EX2100e Excitation Control and Mark VI Speedtronic turbine control systems, serving as the central hub for customer I/O, voltage/current measurement, and protection relay interfacing. It integrates isolation transformers for PT/CT inputs, analog/digital I/O circuits, trip relay outputs, and backplane communication interfaces. The board connects to HSSL/HSLA daughter terminal boards via six sub-D pin connectors, providing terminal access for field wiring. Conformal coating ensures reliability in harsh industrial environments, while hot-swappable design minimizes maintenance downtime.
GE IS200EPSMG2A
- Product Overview: A Group 2 exciter power supply module in GE’s EX2100 Excitation Control series, dedicated to converting 125VDC input from the EPDM power distribution module to regulated +5V, ±15V, +24V DC outputs for EX2100 regulator control systems. It integrates an IS200EPSDG_A daughter board for enhanced input voltage handling, creepage/clearance, and a dedicated fuse for DC link protection. The module includes a buck regulator and push-pull inverter with a high-isolation transformer, delivering isolated +70VDC contact wetting power and serving as the primary power source for C, M1, M2 controllers in Mark VI/VIe turbine control systems. Conformal coating ensures reliable operation in harsh industrial environments, making it a core component for excitation system power conversion and distribution.
GE IS200DSPXH1DBC
- Product Overview: A core digital signal processor (DSP) control board in GE’s EX2100 Excitation Control series, designed for high-speed data acquisition, real-time signal processing, and custom logic execution in industrial excitation systems. It integrates a 60 MHz DSP, ASIC for custom control functions, and on-board memory with flash-stored firmware, serving as the processing heart for EX2100 exciters and Mark VI-based turbine control systems. Conformal coating ensures reliability in harsh industrial settings, while multi-interface connectivity enables seamless integration with backplane, sensors, and actuators.
- Technical Specifications - Processor & Core: 60 MHz DSP for high-speed control calculations; dedicated ASIC for custom logic and I/O management; 16-bit data bus with 32-bit address bus for efficient memory access
GE IS200AEPCH1BAA
- Product Overview: High-precision 4-channel analog output module from GE’s Mark VIe IS200 series, designed for critical control applications in power generation, industrial turbines, and heavy automation. Converts digital control signals from Mark VIe controllers to 4-20mA current or 0-10V voltage outputs to drive actuators, valves, and variable frequency drives (VFDs). Features 24VDC backplane power, VMEbus interface, and conformal coating for harsh industrial environments. Integrates with turbine control systems, DCS, and PLCs to deliver precise analog control signals with low drift and high noise immunity.
- Technical Specifications - Analog Output Channels: 4 independent channels; 4-20mA (sinking/sourcing) or 0-10V DC selectable per channel; 16-bit DAC resolution for ±0.05% full-scale accuracy
GE IS200AEADH1A
- Product Overview: A dedicated I/O grid fork module under GE’s Mark VIe Wind series, engineered to manage and connect I/O signals for wind turbine control systems, ensuring reliable data transmission and signal integrity between control components and field devices. It integrates seamlessly with Mark VIe Wind architecture, featuring conformal coating for environmental resilience, and supports critical monitoring and control functions in wind energy applications.
- Technical Specifications - Core I/O Configuration: 8 output channels; 12/24 VDC positive logic; 2A maximum current per channel
GE IC9445D209
- Product Overview: Heavy-duty crane hook limit switch from GE’s IC9445 series, engineered for precise position detection and safety interlocking in heavy material handling applications. Features a robust lever actuator, two independent non-overlapping circuits, and a watertight NEMA 4/4X enclosure to withstand harsh industrial conditions. Rated for 600VAC/15A to handle high-power loads, it integrates with PLCs, safety relays, and motor control centers to enforce crane hook travel limits and prevent over-travel accidents.
- Technical Specifications - Electrical Ratings: 600VAC maximum voltage; 15A continuous current per circuit; 2 independent non-overlapping circuits; 2-pole (2P) contact configuration; 1 NC (Normally Closed) + 1 NO (Normally Open) per circuit
