Honeywell MC-41103400

Product Introduction:

The Honeywell MC-41103400 is a legacy TDC 3000 / UCN (Universal Control Network) multifunction controller or I/O link processor module, part of the PM (Process Manager) or LM (Logic Manager) family. It hosts control algorithms (continuous, sequential, ladder logic) and communicates with the UCN via the HIU (Highway Interface Unit). Also referenced as a spare part number for certain UCN I/O processors or APM (Advanced Process Manager) sub-modules.

Category: Honeywell

Description

Representative Specifications:

Manufacturer: Honeywell Process Solutions
Part No.: MC-41103400
System: TDC 3000 UCN — APM / PM-L / LM
Function: Control processor or I/O Link Processor (ILP/IOLP) for UCN I/O clusters
Processor: Proprietary 16/32-bit microcontroller (legacy Motorola/Intel architecture)
Memory: Non-volatile EEPROM for strategy; RAM for runtime
Network Interface: UCN (IEEE 802.3 + Honeywell UCN protocol layer) via coax or twisted-pair
Control Capacity: Supports multiple control blocks (PID, Seq, Calc, etc.) — exact point count depends on APM/LM model
Power: +5 VDC / +24 VDC from rack backplane
Operating Temp: 0 °C to +60 °C
Diagnostics: Run / Error / Com LEDs; fault logging to UCN History Module
Certifications: FM / CSA Class I Div 2; CE (legacy)

Functional Features:

Executes regulatory (PID) and sequential (SQC) control strategies
Redundancy supported in APM pair (primary/backup auto-sync)
Downloadable control strategy via TDC 3000 Engineering Station (via CB — Control Builder or LM Configurator)

Application Scenarios:

Legacy refinery / petrochemical plant TDC 3000 process control nodes
Turbine auxiliary control via LM (Logic Manager) with this processor
Life-extension / obsolescence-spare procurement for running TDC 3000 sites

Material & Structure:

Printed circuit board with gold-edge connector
Aluminum stiffener plate (on some versions)
Front-panel LED array (RUN / FLT / COM / TEST)

Installation & Notes:

Always verify compatibility with existing APM/LM firmware before swapping
After replacement, reload control strategy if NVRAM is not retained — follow TDC 3000 cold-start / warm-start procedure
Keep spare in anti-static packaging; observe ESD precautions

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Honeywell MC-41103400”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.