GE IC697PWR711K
- Product Introduction: The IC697PWR711K is a 100W rack-mounted switching power supply module designed for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 or VME Integrator racks via a 48-pin backplane connector. It delivers +5 VDC, +12 VDC, and -12 VDC regulated outputs to power PLC CPUs, I/O modules, and peripherals, with support for 120/240 VAC or 125 VDC input, power factor correction, and ride-through capability for transient power loss. It can power one or two racks when total load stays within 100W rating, connected via a prewired inter-rack cable.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: 100W switching power supply for Series 90-70 PLC backplanes
GE IC697CMM742
- roduct Introduction: The IC697CMM742 is a single‑slot TCP/IP Ethernet (Type 2) Interface Module for GE Series 90‑70 PLC systems, delivering 10 Mbps Ethernet connectivity compliant with IEEE 802.3 standard. It has three network ports (10BaseT RJ‑45, 10Base2 BNC, AUI 15‑pin D), one RJ‑11 RS‑232 Local Station Manager Port, and one 15‑pin D‑type Serial Software Load Port, supporting TCP/IP, SRTP, EGD, and Modbus TCP/IP protocols for seamless integration with Ethernet LAN, SCADA, HMI, and other industrial devices.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single‑slot Ethernet Interface Module (Type 2) for Series 90‑70 PLC baseplates
GE IC697CMM711
- Product Introduction: The IC697CMM711 is a single-slot communications coprocessor module for GE Series 90-70 PLC systems, equipped with a 12 MHz 80C186 microprocessor and dual configurable RS-232/RS-422/RS-485 serial ports (25-pin D-shell female connectors). It supports CCM (master/slave/peer), SNP/SNP‑X (master/slave), and Modbus RTU (slave only) protocols, enabling multi‑drop network data exchange between the PLC and other industrial devices, with software configuration eliminating manual jumpers/switches.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single‑slot communications coprocessor module for Series 90-70 baseplates
- Microprocessor: 12 MHz 80C186
GE IC697BEM721
- Product Introduction: The IC697BEM721 is a single-slot I/O Link Interface Module designed for GE Series 90-70 PLC systems, providing a high-speed serial interface between the PLC and up to 16 CNC-compatible I/O Link devices. It features dual RS-422/485 ports, conformal coating for harsh environments, and three LED indicators for real-time status monitoring, enabling seamless integration and data exchange in industrial automation applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: I/O Link Interface Module for Series 90-70 PLCs
GE IC697ALG320
- Product Introduction: The IC697ALG320 is a high-level analog output module for GE Series 90-70 PLC systems, featuring 4 individually configurable channels for voltage or current outputs, with no jumpers/DIP switches needed for setup. It offers 16-bit DAC resolution (14-bit monotonicity), output-backplane isolation, factory calibration data stored in EEPROM, and supports unipolar/bipolar voltage (0-10 VDC, ±10 VDC) and current (0-22.5 mA, 4-20 mA) signals, designed for precise control of industrial actuators, valves, and process control loops.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot high-level analog output module for Series 90-70 PLC baseplates
GE IC695RMX128
- Product Introduction: The IC695RMX128 is a single-slot reflective memory module for GE PACSystems RX3i universal backplanes, delivering 128 MB user memory for real-time data sharing across redundant CPU pairs and reflective memory networks. It uses 2.12 Gbaud fiber-optic links (LC connectors) for 2.1 GB/s deterministic data transfer, supports hot insertion/removal, dynamic packet sizing, and network error detection, enabling seamless failover and data synchronization in mission-critical industrial control systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot reflective memory module for RX3i redundant CPU systems and reflective memory networks
GE IC695PSD140E
- Product Introduction: The IC695PSD140E is a 40-Watt DC-input multipurpose power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC, +3.3 VDC, and +24 VDC outputs for powering RX3i CPU, I/O, communication, and relay modules. It supports redundancy and load-sharing setups, can be daisy-chained up to four units, and features front-panel LED indicators and an on/off switch with a protective cover, optimized for industrial DC power systems requiring reliable and expandable power distribution.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input multipurpose power supply module for RX3i universal backplane
GE IC695PSD140A
- Product Introduction: The IC695PSD140A is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC, +3.3 VDC, and +24 VDC outputs. It is built for load-sharing and redundancy setups, supports daisy-chaining up to four units, and powers RX3i CPU, I/O, communication, and relay modules in industrial DC power systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input multipurpose power supply module for RX3i universal backplane
GE IC695PSD040F
- Product Introduction: The IC695PSD040F is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features front-panel LED status indicators, an on/off switch with a protective cover, and supports daisy-chaining up to two units for expanded capacity, optimized for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
- Input Voltage (Nominal): 24 VDC
GE IC695PSD040
- Product Introduction: The IC695PSD040 is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features LED status indicators, on/off switch with protective cover, and supports daisy-chaining up to two units for expanded capacity, ideal for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
GE IC695PSA040
- Product Introduction: The IC695PSA040 is a 40-Watt universal power supply module for GE PACSystems RX3i controllers, converting 85-264 VAC or 100-300 VDC input into regulated +3.3 VDC, +5.1 VDC, and +24 VDC outputs. It powers RX3i backplane modules, CPU, I/O, and relay circuits, with front-panel LEDs for status monitoring, and works exclusively in RX3i universal backplanes (one module per backplane, no redundancy).
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: 40-Watt power supply module for RX3i PACSystem universal backplane
GE IC695PBM300
- Product Introduction: The IC695PBM300 is a single-slot PROFIBUS-DP master module for GE PACSystems RX3i controllers, enabling seamless integration of PROFIBUS-DP networks with RX3i systems. It connects up to 125 PROFIBUS-DP slaves, supports DP-V1 advanced messaging, Sync/Freeze modes, and field-upgradable firmware, designed for discrete and process automation requiring reliable industrial communication.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot PROFIBUS-DP master communication module for RX3i universal backplane
