ICS Triplex T8461 Digital Output Module
Technical Specifications
- Output Channels: 40 digital output channels for controlling external devices like valves, motors, and relays.
- Voltage Range:
- System power supply: 20–32 V DC
- Working output/field voltage: 18–60 V DC
- Isolation: 2500 V pulse-tolerant optical isolation barrier to prevent electrical interference.
- Protection: Automatic overcurrent protection per channel (no external fuses required).
- Response Time: Sub-millisecond switching for real-time control.
- Event Reporting: Sequence of Events (SOE) logging with 1 ms resolution for troubleshooting.
- Power Groups: 8 independent power groups (5 outputs per group) for flexible device power management.
- Environmental Rating: IP20 enclosure (dust-protected, non-immersion-resistant).
- Operating Temperature: -40°C to +70°C, suitable for extreme industrial conditions.
- Communication Protocols: Supports Modbus, Profibus, and Foundation Fieldbus for seamless integration.
ICS Triplex T8461C Digital Output Module
Technical Specifications
- Output Channels: 40 digital output channels for controlling external devices like valves, motors, and relays.
- Voltage Range:
- System power supply: 20–32 V DC
- Working output/field voltage: 18–60 V DC
- Output Current: 0.75 A per channel
- Response Time: Less than 1 millisecond for rapid switching.
- Isolation: 2500 V pulse-tolerant optical isolation barrier to prevent electrical interference.
- Protection: Automatic overcurrent protection per channel (no external fuses required).
- Power Groups: 8 independent power groups (5 outputs per group) for flexible device power management.
ICS Triplex T8480C Digital Input Module
Technical Specifications
- Input Channels: 32 digital input channels for receiving switch-type signals from field devices (e.g., buttons, relays, limit switches).
- Voltage Range: 24 V DC (operating voltage).
- Current Range: 2 A per channel.
- Response Time: Less than 2 milliseconds for rapid signal capture.
- Accuracy: ±0.1% for precise measurement.
- Isolation Voltage: 250 V RMS (channel-to-ground isolation).
- Surge Voltage: 4 kV for protection against electrical surges.
- Noise Suppression: 500 V/μs to minimize interference.
ICS TRIPLEX T8800–Channel 24 V DC Digital Input Module
Technical Specifications:
- The T8800 series is known for its triple modular redundancy (TMR) architecture, which provides a high level of fault tolerance by using three parallel processing units.
- Designed to meet SIL 3 (Safety Integrity Level) requirements according to the IEC 61508 standard, ensuring it can be reliably used in safety-critical systems.
- Capable of operating within a specified temperature range suitable for harsh industrial environments, contributing to its robustness and reliability.
- Supports various input/output configurations tailored to handle different types of signals from sensors, actuators, and other field devices.
ICS Triplex T8830 Trusted 40-Channel Analogue Input Field Termination Assembly (FTA)
Technical Specifications
- Input Channels: 40 analogue channels, supporting simultaneous connection of multiple sensors (e.g., temperature, pressure, flow).
- Signal Conversion: Converts analogue signals (voltage/current) into digital data for transmission to control systems via industrial protocols like Modbus or Profibus.
- Input Range: Compatible with a wide range of sensor outputs, including 0-10V and 4-20mA signals.
- Resolution: Features 16-bit ADC (Analog-to-Digital Converter) for high-precision capture of minute signal variations.
- Sampling Rate: Short sampling cycles to meet real-time control demands.
- Redundancy: Certain models support redundant configurations to enhance system availability and prevent data loss from single-point failures.
- Isolation: Electrical isolation technology minimizes electromagnetic interference (EMI) for accurate data transmission.
ICS Triplex T8850 Triple Modular Redundant (TMR) Digital Input/Output Module
Technical Specifications
- Channels: 40 digital input/output channels (configurable for either input or output).
- Voltage Range:
- Operating voltage: 24 V DC (standard); supports up to 60 V DC via external power distribution units.
- Field terminal wire size: 12 AWG to 28 AWG.
- Current Rating:
- Maximum current per channel: 2 A.
- Power dissipation: 0.5 W per power group.
- Isolation:
- Channel-to-channel isolation: 50 V reinforced (continuous), tested at 1411 V DC for 60 seconds.
- Power group-to-power group isolation: 250 V basic (fault), tested at 2436 V DC for 60 seconds.
HEY YOU, SIGN UP AND CONNECT TO WOODMART!
Be the first to learn about our latest trends and get exclusive offers
Will be used in accordance with our Privacy Policy