Motorola MVME2101-1
Motorola MVME2301-900
Motorola MVME2305-900
Brief Introduction:
The MVME2305-900 is a rugged 6U VME64x single board computer based on the PowerPC or MC68EC040 architecture (depending on batch/revision), designed for mission-critical real-time applications in defense, aerospace, power SCADA, and industrial automation. It features VMEbus master/slave capability, PMC expansion slots, dual Ethernet, and battery-backed SRAM for non-volatile parameter storage.
Motorola MVME2400-0361
Product Name: MVME2400-0361 6U VME SBC (PowerPC 750 G3)
Product Brief: PowerPlus II platform, MPC750 G3 at 300–450 MHz, common in late-90s telemetry and baseband control.
Processor: MPC750 366 MHz (typical for -0361 suffix), 32 KB I/D L1, 1 MB L2 backside cache
Memory: 64 MB ECC SDRAM (up to 512 MB), 8 MB Flash, 8K×8 NVRAM + RTC
Motorola MVME2400-0361
Technical Specifications
- Processor:
- PowerPC 750 (MPC750) microprocessor, clocked at up to 450 MHz, offering low power consumption and high performance for embedded systems.
- Memory:
- Up to 512 MB ECC SDRAM for error-corrected data storage.
- 128 MB Flash ROM for firmware and application storage.
- 1 MB NVRAM with battery backup for non-volatile data retention.
- VMEbus Interface:
- Supports VME64 bus (version 3.x) with high bandwidth and data transfer rates.
- 6U VMEbus form factor for compatibility with standard industrial enclosures.
Motorola MVME2434 VMEbus Processor Module
Technical Specifications:
- Processor:
- PowerPC 750 32-bit RISC microprocessor with floating-point unit (FPU) and memory management unit (MMU).
- Clock speed: Typically 200–400 MHz (specific models may vary).
- Cache: 32 KB L1 instruction cache and 32 KB L1 data cache.
- Back-End Cache: 1 MB secondary cache for enhanced performance.
- Memory:
- SDRAM: 32 MB to 512 MB board-mounted ECC SDRAM (Error-Correcting Code) for data integrity.
- Flash Memory: 1 MB or 4 MB (depending on configuration) for firmware storage.
- NVRAM: 8 KB non-volatile RAM with battery backup for critical data retention.
Motorola MVME2604-712IO
Product Name
Motorola MVME2604-712IO VME SBC with MVME712 I/O transition configuration
Product Overview
MVME2604-712IO is a PowerPC-based 6U VME single-board computer commonly associated with the MVME712 I/O transition module. It is used for real-time control, data acquisition, and industrial VME system modernization.
Motorola MVME2700-761
Motorola MVME5100
Technical Specifications:
- Processor: Supports PowerPC-based microprocessors (e.g., MPC7410, MPC750, MPC755) with clock speeds up to 1.5 GHz, offering high performance and low power consumption.
- Memory:
- 128 MB SDRAM (expandable to 1 GB via mezzanine cards).
- 2 GB IDE or solid-state drive (SSD) for storage.
- I/O Interfaces:
- 2x RS-232C serial ports.
- Dual 10/100BaseTX Ethernet ports for high-speed networking.
- PCI and CompactFlash slots for peripheral expansion.
Motorola MVME51005E-0163
roduct Overview
The MVME51005E-0163 is a high-performance 6U VME64x single-board computer (SBC) from GE (formerly Motorola Computer Group, later Emerson/Artesyn), built for mission-critical embedded systems requiring deterministic processing, rugged reliability, and long-term availability. It features the Freescale PowerPC 7455 (G4) processor running at 1.0 GHz, with 32KB L1 (I/D) cache, 2MB on-die L2 cache, and an AltiVec 128-bit SIMD unit for accelerated signal processing. The board integrates 512MB ECC DDR SDRAM (expandable to 1GB/2GB), 8MB Flash, and CompactFlash Type I/II storage for reliable data retention and boot capabilities. It includes dual 10/100/1000Base-T Ethernet ports, two RS-232/422 serial ports, USB 2.0, and a 64-bit PMC slot for I/O expansion, alongside a VME64x interface (64-bit/66MHz, 2eSST support) for seamless integration with legacy and modern VME systems.
MOTOROLA MVME51105E-2161 VME Single-Board Computer
Technical Specifications:
- Processor: Typically equipped with a PowerPC processor, offering substantial computational power suitable for complex tasks.
- Memory: Supports significant amounts of RAM, essential for handling large datasets or multiple processes simultaneously. Also includes onboard flash memory for storage.
- I/O Capabilities: Features a wide range of I/O interfaces including serial ports, Ethernet, USB, and others, enabling connectivity with peripherals and networks.
- Expansion Slots: Designed with several VMEbus slots, facilitating the addition of extra functionality through compatible modules.
Motorola MVME550-163
Product Name: MVME550-163 VME SBC (Early MVME5500-Class PowerPC)
Product Brief: 6U VME board bridging 68k era to PowerPC; MPC7400/MPC7410 class CPU at sub-1 GHz, intended for data-acquisition and mid-range DSP offload.
Processor: PowerPC MPC755 or MPC7400 ~400–550 MHz, AltiVec on 7400/7450 spin, 32 KB L1, 256 KB–1 MB L2
