MOOG D136-003-001
Product Introduction
D136-003-001 is single-axis derivative variant of D136 series motion controller, optimized for single hydraulic actuator independent closed-loop control scenarios without dual-axis synchronization demand. Retains identical core PowerPC control architecture and hydraulic algorithm library as D136-001-007, reduces redundant dual-axis feedback and analog output circuits to minimize cabinet space occupation.
MOOG D635-671E
Product Introduction
D635-671E is two-stage direct drive electro-hydraulic servovalve without flapper-nozzle pilot stage, adopting patented MOOG DDV linear force motor spool direct drive technology. Eliminates pilot stage fluid contamination sensitivity, delivers ultra-stable flow linearity and low hysteresis under industrial hydraulic fluid cleanliness conditions. Designed for high-response closed-loop hydraulic positioning systems requiring long service maintenance intervals and wide pressure operating range.
MOOG D691-072D
Product Introduction
D691-072D is high-flow two-stage electro-hydraulic proportional servo valve equipped with patented MOOG SERVOJET flapper-less pilot drive architecture and fully integrated on-board control electronics. Simultaneously realizes independent closed-loop flow control and pressure closed-loop control via dual analog command input signals, combining proportional flow regulation and pressure limiting functions within single valve body.
MOOG D765-102-4
Product Introduction
D765-102-4 is compact single-stage flapper-nozzle type electro-hydraulic servovalve designed for medium-flow medium dynamic response closed-loop hydraulic positioning systems. Adopts classic permanent magnet torque motor flapper-nozzle pilot control architecture with zero-lapped main spool, delivering high linearity and fast transient response within miniaturized valve body footprint.
Moog G122-824-002
-
Product Name: Moog G122 Series Dual-Channel P-I Servo Amplifier / Servo Valve Driver, Model G122-824-002
-
Product Introduction: An industrial-grade analog servo amplifier designed to accept low-level command signals (±10 V or 4–20 mA) and feedback (±10 V or 4–20 mA), compute the error, apply proportional and integral gain, and output a current/voltage drive to electro-hydraulic servo valves or proportional valves. Used in closed-loop position/force/pressure control.
MOOG G122-829A-001
MOOG G123-825-001 Buffer Amplifier
Technical Specifications
- Power Supply: 24 VDC (65 mA current draw).
- Input Signal: 4-20 mA (standard PLC analog output).
- Output Signals:
- 4-20 mA (fixed).
- 0-10 V (fixed).
- 0-5 mA to ±100 mA (switch-selectable).
- Filtering: Single-pole active filter to remove input noise, with switch-selectable time constants.
- Mounting: Compact DIN rail enclosure (dimensions: 16 x 25 x 12 mm).
- Weight: 0.16 kg.
- Operating Temperature: 0°C to 85°C.
- Humidity Tolerance: 0-95% non-condensing.
Moog G403-552A
Product Introduction: The Moog G403 family comprises single- or dual-channel servo amplifiers / electronics packages for driving Moog two-stage electrohydraulic servo valves (e.g., D633, D634, D661, D791 series). The G403-552A variant is a rack or DIN-mount analog amplifier providing command summing, ramp generation, deadband compensation, and current drive for valve torque motor coils. Exact I/O configuration should be verified against the shipped datasheet as G403 sub-models vary in enable logic and feedback provision.
MOOG M128-010-A001B Dual-Port Communication Module
Technical Specifications
- Ports: Dual-port design supporting two independent communication channels.
- Protocols: Compatible with multiple industrial protocols, including Modbus, Profibus, and EtherNet/IP, enabling integration with diverse devices.
- Data Transfer: High-speed data transmission with real-time communication capabilities.
- Environmental Resistance: Robust construction suitable for harsh industrial conditions, with resistance to dust, moisture, and vibrations.
- Power Supply: Integrated power management for stable operation in varied voltage ranges.
- Mounting: Compact form factor for easy installation in control cabinets or DIN rails.
Moog SM2315DT-BRKETH
Product Name: Moog Animatics Class 5 SmartMotor™ SM2315DT-BRKETH — NEMA 23 Integrated Brushless Servo Motor with Holding Brake and Ethernet Communication
Product Brief:
An all-in-one motion product combining a NEMA 23 brushless servo motor, drive electronics, 20-bit absolute encoder, spring-applied holding brake, and Ethernet (EtherNet/IP with CIP Motion / Modbus TCP) communications — no separate servo drive required.
MOOG T161-902A-00-B4-2-2A Industrial Automation Interface Module
Technical Specifications
- Protocol Support: Compatible with HART Master, Foundation Fieldbus Host, and Profibus PA Master protocols.
- Connectivity:
- USB interface for direct connection to PCs or laptops.
- Bluetooth option for wireless communication with mobile devices (e.g., smartphones, tablets).
- Battery-operated for use in explosion-proof zones without requiring external power.
- Environmental Resistance:
- ATEX-certified for Zone 1 hazardous areas.
- Robust design with options for intrinsic safety circuit connections.
- Operational Features:
- Supports temporary connection to fieldbus segments and HART current loops for isolated device communication.
- Enables non-cyclic read/write access to all field device parameters.
Motorola 0188679 0190530
Technical Specifications:
- Processor: Intel Atom CPU with high computing power for real-time data processing.
- Size: One-third the size of the previous Beckhoff C6905 model, enabling flexible installation in confined spaces.
- Cost Efficiency: Approximately 25% lower price compared to prior x86 IPCs from Beckhoff, offering significant savings.
- Memory and Storage: Supports scalable memory and storage options to meet diverse application demands.
- I/O Interfaces: Includes multiple serial ports, Ethernet connectivity, and customizable PMC slots for expanded functionality.
