Shop - Page 193 of 326 - qzmro Automation

Showing 2305–2316 of 3912 results

GE IC610MDL116A Analog Input Module

Product Description The GE IC610MDL116A is an analog input module designed for industrial automation systems, functioning as a signal conversion interface between field sensors and a PLC . It converts analog signals such as voltage or current from field devices into digital signals that the PLC can process . This module is commonly associated with the GE Series 1 PLC family, though some sources place it within Series 90-30/70 systems .

Quick view

GE IC660BBA104K

The identity and function of this unit are highly inconsistent across sources. One primary description identifies it as a Genius Analog I/O Block for the GE Series 90-30 PLC, featuring 4 inputs and 2 outputs, powered by 115 VAC or 125 VDC . Another major description claims it is a high-performance Communication Module for the Series 90-70 PLC with dual RS-485 and Ethernet ports . Other sources classify it as a 16-channel Digital Output Module for PACSystems RX3i , or an expanded I/O module for a GE Drive 660 series inverter with mixed analog, digital, and pulse channels .

Quick view

GE IC660BBD024 12/24 VDC 32-Circuit Source I/O Block

The IC660BBD024 is an intelligent, configurable I/O block from the GE Genius I/O series, now under Emerson Automation . This module serves as a compact interface between a controller and field devices that send or receive binary signals. It features 32 identical discrete circuits, each configurable as an input, output, or output with feedback, providing exceptional application flexibility . The block is specifically a sourcing type, meaning it sends current to field output devices such as relays, contactors, lamps, and low-power control devices .

Quick view

GE IC660EBD024

Manufacturer: GE Fanuc Automation / GE Vernova (Legacy Series 90-30 Genius I/O)

Product Brief: Intelligent block I/O module that operates on the GE Genius Bus. Each of the 16 points can be individually configured as input or output (source/sourcing type), accepts 24 V DC or 48 V DC field voltage, and reports diagnostics back to the Genius bus master (PLC or host). Often paired with IC660BBD024 terminal base.

Quick view

GE IC660EBD025 Genius Electronic Assembly

Product Description The GE IC660EBD025 is a core electronic assembly within the GE Genius I/O system, a distributed I/O platform designed for industrial automation . It provides 32 discrete circuits that support flexible configuration as inputs or outputs, operating at 5, 12, or 24 V DC. The module functions as a high-density interface for field devices such as sensors, switches, solenoids, and relays, and communicates via the Genius bus protocol for integration with GE Fanuc Series 90-30 and 90-70 PLC systems .

Quick view

GE IC660ELB912G

The function of this unit is highly inconsistent across sources. The most frequent description identifies it as a MicroGENI sub-board, a component that attaches to a single or dual-slot IBM PC Interface Module (PCIM) to act as a Genius bus controller. Another primary description classifies it as a 24 VDC power supply module for the PACSystems RX3i PLC. Yet other sources describe it as a Profibus DP communication card for GE Drive 660 series drives, a multi-function I/O expansion module for Series 90-30 PLCs, or an ARCNET board for Mark V turbine controls.

Quick view

GE IC660ELB921H Relay Output Module

Product Introduction This configuration identifies the IC660ELB921H as a relay output module for industrial automation systems. It provides control signals for various field devices through normally open contact relays. The module supports CPU redundancy and is configurable via PCIM Configuration Software, designed for integrating control outputs within GE automation architectures.

Quick view

GE IC660EPM100J

Technical Specifications:

Input/Output Configuration: The module supports a combination of digital inputs and outputs, with a typical configuration of 8 outputs.
Output Type: Transistor outputs (sourcing or sinking, depending on configuration).
Output Voltage: 24 VDC.
Output Current: Each output point can handle a maximum of 0.5 A (sinking) or 0.3 A (sourcing).
Response Time: The typical response time is less than 1 ms, ensuring real-time control and monitoring.
Isolation Voltage: The module provides 500 VAC isolation between the field side and the logic side, enhancing system safety and reliability.

Quick view

GE IC660HHM501N

The function of this unit is highly inconsistent across sources. One of the most frequent descriptions identifies it as a handheld monitor for the GE Fanuc Genius I/O series, designed for local configuration, monitoring, and diagnostics . Another common description classifies it as a Genius Block I/O Module providing 32 digital inputs and 32 digital outputs for high-speed control . Yet other sources describe it as an analog I/O module or a system power supply .

Quick view

GE IC670ALG230

Technical Specifications:

Input Channels: 8 single-ended analog current input channels.
Supported Signal Ranges: Configurable for 0–20 mA or 4–20 mA current loops.
Resolution: 12-bit digital resolution; 5.0 μA analog resolution.
Conversion Time: 60 μs per channel (typical) under a 1 MHz module clock.
Input Impedance: 2.87 kΩ.
Isolation: Each channel provides ground and logic isolation rated at 1500 VAC for 1 minute (continuous 250 VAC).

Quick view

GE IC670ALG230K Analog Input Module

Technical Specifications

Number of Channels: 8 single-ended analog input channels
Input Signal Types: Accepts 0-20 mA and 4-20 mA current signals
Resolution: 12-bit digital resolution for accurate signal representation
Conversion Time: 1 microsecond per channel at a 60 MHz module clock frequency
Input Impedance: 2.87 kilohms
Isolation: Each channel has ground and logic isolation rated at 1500 VAC for one minute and 250 VAC continuously

Quick view

GE IC670ALG240-JC Analog Current Source Input Module

Product Description The GE IC670ALG240-JC is a high-performance analog input module manufactured by GE Fanuc, belonging to the Field Control series . Its primary function is to convert analog current signals from field sensors or transmitters into digital signals that a programmable logic controller can process . The module is designed for integration with GE Fanuc Series 90-30 and Series 90-70 PLC systems .

Quick view