SL-MTI TORQUE MT2130-230AF - Image 1
Click to enlarge
Eaton MTL4842
Eaton MTL4842
Back to products
Eaton MTL5544
Eaton MTL5544

SL-MTI TORQUE MT2130-230AF

Product Introduction:​
This model is a specialized electric motor manufactured by SL-MTI Torque Systems, commonly utilized in precision industrial automation, aerospace ground support, and semiconductor manufacturing equipment requiring high torque density and reliable synchronous operation.
Category:
Description
Technical Specifications & Performance Parameters:​
  • Model Code:​ MT2130-230AF
  • Rated Voltage:​ 230 VAC (Typical 3-phase based on frame size)
  • Motor Type:​ Synchronous Reluctance / Permanent Magnet Assisted
  • Rated Power:​ Approximately 2.0 kW class (based on MT2130 frame references)
  • Rated Speed:​ Variable depending on drive configuration; typical base speeds in 1500–3000 RPM range
  • Rated Torque:​ High starting torque characteristic of reluctance designs; exact figures require factory datasheet verification
  • Enclosure:​ Industrial-grade ventilated or TENV (Totally Enclosed Non-Ventilated)
  • Certification:​ CE marked
Material Composition & Structural Features:​
  • Stator:​ Silicon steel laminations with precision-wound copper windings
  • Rotor:​ Salient pole reluctance structure or hybrid PM-reluctance design
  • Housing:​ Cast aluminum or machined steel for thermal dissipation
  • Shaft:​ Hardened steel with keyway for coupling
  • Feedback Ready:​ Typically configured for encoder/resolver mounting
Working Principle:​
Operates on magnetic reluctance minimization principles where the rotor aligns itself to minimum reluctance paths created by stator winding excitation, often assisted by permanent magnets for improved torque and efficiency.
Installation Requirements:​
  • Mount via standard flange (face or foot mount compatible with MT21 frame)
  • Ensure shaft alignment within tolerance to prevent bearing stress
  • Use appropriate servo drive matched to 230 VAC input and torque requirements
Usage Considerations:​
  • Avoid overloading beyond rated stall torque to prevent thermal damage
  • Verify insulation resistance periodically in humid environments
  • Use shielded cable for feedback devices to minimize EMI
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “SL-MTI TORQUE MT2130-230AF”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Elmo G-TUB30480ERSS0

  • Rated Voltage: 480 VAC
  • Rated Current: 30 A
  • Continuous Power: Up to 25 kW
  • Communication Interfaces: Ethernet, CANopen, RS232, EtherCAT, etc.
  • Feedback Types: Encoder, resolver, Hall sensor (depending on the model)
  • Operating Temperature Range: - 40°C to +70°C (industrial - grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Installation Method: Rack - mount, DIN - rail mount (depending on the model)
Read more
Quick view

Fireye 45UV5-1101

Technical Specifications:
  • Detection Type: Ultraviolet (UV)
  • Sensing Distance: Effective sensing distance up to several meters, depending on flame size and intensity
  • Operating Voltage: Typically operates on 24 VDC
  • Power Consumption: Low power consumption suitable for energy-efficient applications
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 0% to 95% relative humidity, non-condensing
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

Radisys SBC486DX66 Industrial Single-Board Computer

Technical Specifications (for a typical Radisys SBC):
  • Processor Architecture: High-performance multi-core processors optimized for handling large volumes of session traffic.
  • Memory: Equipped with ample RAM and storage to support real-time processing, session management, and logging activities.
  • Network Interfaces: Multiple Gigabit Ethernet ports supporting SIP, RTP, and other communication protocols to facilitate seamless connectivity between different network segments.
  • Security Features: Comprehensive security measures including encryption, authentication, and denial-of-service protection.
  • Scalability: Designed to scale from small businesses up to large enterprises and service providers, managing thousands of sessions simultaneously.
  • Environmental Tolerance: Built to operate reliably in standard data center environments
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view