Metso D202593 - Image 1
Metso D202593 - Image 2
Click to enlarge
Metso D202593
Metso D202593 - Image 2
BASLER ELECTRIC DECS-250-CN1CN1N
BASLER ELECTRIC DECS-250-CN1CN1N
Back to products
Emerson DA7281440
Emerson DA7281440

Metso D202593

Product Name:​ Metso VALMET D202593 / D202593L I/O Communication & Machine Monitoring Module
Product Introduction:​ Part of Metso/Valmet’s distributed control and condition monitoring system used in pulp & paper, power, and heavy process industries. The D202593L variant supports redundancy, data logging, and vibration/condition monitoring integration.
Category:
Description
Technical Specifications:
  • Bus Interface:​ PROFIBUS DP, up to 12 Mbit/s
  • Max Connected I/O Modules:​ 24
  • Dimensions:​ Approx. 85 × 30 × 25 mm
  • Weight:​ ~150 g
  • Operating Temp.:​ -20 °C to +60 °C
  • Protection:​ IP67 (sealed enclosure for panel/cabinet mounting)
  • Power:​ Supplied via backplane / system bus
  • Redundancy:​ Supported in D202593L version
Key Features:
  • Real-time signal acquisition from field transmitters and vibration sensors
  • Event logging and time-stamped data recording
  • EMC compliant per industrial standards
  • Compatible with Valmet DNA / Damatic XD system architecture
Applications:​ Rotating machinery condition monitoring, process I/O in pulp & paper lines, power plant auxiliary control.
Installation Notes:​ Mount in grounded control cabinet; verify bus termination resistor setting on PROFIBUS segment; keep away from high-voltage compartments.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Metso D202593”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

METSO D201435L

Series:​ Neles Series 2000 / ND9000 family compatible
Function / Working Principle:​
Receives a 4–20 mA DC analog setpoint signal from DCS/PLC and compares it with the actual valve stem position feedback (via internal cam/lever). A digital PWM-controlled piezo or nozzle-flapper pilot stage modulates supply air to the actuator, driving the valve to the commanded position in closed-loop control. Supports auto-calibration and adaptive gain tuning.
Read more
Quick view

METSO D201466

Product Type:​ Internal electronics unit / motherboard for smart valve positioner
Description:​
This is the core processor board used inside Neles ND9000 or compatible Series 2000 smart positioners. It houses the microprocessor, A/D-D/A converters, HART modem, and piezoelectric pilot driver circuitry. It receives 4–20 mA + HART from the control system and drives the pneumatic section of the positioner. Can also be supplied as a spare/replacement PCB for field refurbishment.
Read more
Quick view

METSO D201471

Product Name:​ Metso Neles Smart Valve Positioner Electronic Module, D201471
Product Type:​ Intelligent positioner controller / internal module or complete unit
Specifications:
  • Input:​ 4–20 mA + HART (optionally Profibus PA / FF per full assembly)
Read more
Quick view

METSO D201472

Product Name:​ Metso DNA Distributed Control System — Analog Output Module, 8-channel (D201472)
Product Type:​ Process I/O module for Metso DNA / third-party DCS racks
Function / Working Principle:​
Converts digital process values from the control engine into proportional analog signals (4–20 mA or 0–10 V DC) to drive field devices such as valve positioners, variable frequency drives (VFDs), or indicating meters. Each channel is galvanically isolated.
Read more
Quick view

METSO D201483

Product Name:​ Metso Neles Smart Valve Positioner Module, D201483
Product Type:​ Advanced pneumatic valve positioner with HART
Technical Specifications:
  • Input Signal:​ 4–20 mA DC + HART protocol
Read more
Quick view

METSO D201832

Working Principle (D201832 Positioner):​
The positioner receives a 4–20 mA DC setpoint from the DCS/PLC and continuously compares it with real-time valve stem position sensed by a non-contact Hall-effect or potentiometric feedback linkage. A digital piezo pilot stage modulates supply air to the actuator in closed-loop control, driving the valve to the commanded position. Auto-calibration establishes the zero, span, and deadband; adaptive gain tuning compensates for actuator friction and seat load variation. HART 7 protocol is superimposed on the 4–20 mA loop for configuration, diagnostics, and partial-stroke testing.
Read more
Quick view

METSO D201925

Function / Working Principle:​
Each of the 32 (or 16, depending on rack firmware revision) input channels accepts a 24 V DC wet contact or solid-state sensor signal from field devices — limit switches, proximity sensors, motor run status, ESD pushbutton contacts, etc. Optical isolation decouples field-side voltage transients from the system backplane. The module samples inputs at a configurable scan rate, applies software debounce filtering, and presents the binary state to the control engine for logic, interlocking, and alarm evaluation. LED indicators show per-channel ON/OFF status and module health. The module is hot-swappable in a live DNA rack.
Read more
Quick view

Metso IOP371

Product Name:​ S800 I/O RTD (Resistance Temperature Detector) Input Module — IOP371
Product Introduction:​ 8-channel RTD input module for Valmet DNA / Metso S800 distributed I/O system; provides high-accuracy temperature measurement with full channel-to-channel and channel-to-bus isolation, supporting 2-, 3-, and 4-wire RTD connections.
Read more
Quick view