METSO D201466 - Image 1
METSO D201466 - Image 2
Click to enlarge
METSO D201466
METSO D201466 - Image 2
METSO D201435L
METSO D201435L
Back to products
METSO D201471
METSO D201471

METSO D201466

Product Type:​ Internal electronics unit / motherboard for smart valve positioner
Description:​
This is the core processor board used inside Neles ND9000 or compatible Series 2000 smart positioners. It houses the microprocessor, A/D-D/A converters, HART modem, and piezoelectric pilot driver circuitry. It receives 4–20 mA + HART from the control system and drives the pneumatic section of the positioner. Can also be supplied as a spare/replacement PCB for field refurbishment.
Category:
Description
  • Specifications:
    • Input Signal:​ 4–20 mA DC (HART 7 capable)
    • Optional Fieldbus:​ Profibus PA / Foundation Fieldbus (depending on full assembly variant)
    • Supply Voltage:​ 8–30 V DC (loop-powered, typically 24 V DC)
    • Operating Temp.:​ –40 °C to +85 °C
    • Communication:​ HART 7 standard; optional FF or PA with proper option card
    • Display Interface:​ Connects to optional local LCD + keypad
    • Certification:​ SIL 2 / SIL 3 capable (system dependent), ATEX, IECEx, FM, CSA
    • Material:​ FR4 multilayer PCB with conformal coating for humidity/vibration resistance
    Applications:​ Used as the “brain” of Neles smart positioners on quarter-turn (ball/butterfly) and sliding-stem (globe) control valves in process industries.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “METSO D201466”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

METSO D201471

Product Name:​ Metso Neles Smart Valve Positioner Electronic Module, D201471
Product Type:​ Intelligent positioner controller / internal module or complete unit
Specifications:
  • Input:​ 4–20 mA + HART (optionally Profibus PA / FF per full assembly)
Read more
Quick view

METSO D201472

Product Name:​ Metso DNA Distributed Control System — Analog Output Module, 8-channel (D201472)
Product Type:​ Process I/O module for Metso DNA / third-party DCS racks
Function / Working Principle:​
Converts digital process values from the control engine into proportional analog signals (4–20 mA or 0–10 V DC) to drive field devices such as valve positioners, variable frequency drives (VFDs), or indicating meters. Each channel is galvanically isolated.
Read more
Quick view

METSO D201483

Product Name:​ Metso Neles Smart Valve Positioner Module, D201483
Product Type:​ Advanced pneumatic valve positioner with HART
Technical Specifications:
  • Input Signal:​ 4–20 mA DC + HART protocol
Read more
Quick view

METSO D201832

Working Principle (D201832 Positioner):​
The positioner receives a 4–20 mA DC setpoint from the DCS/PLC and continuously compares it with real-time valve stem position sensed by a non-contact Hall-effect or potentiometric feedback linkage. A digital piezo pilot stage modulates supply air to the actuator in closed-loop control, driving the valve to the commanded position. Auto-calibration establishes the zero, span, and deadband; adaptive gain tuning compensates for actuator friction and seat load variation. HART 7 protocol is superimposed on the 4–20 mA loop for configuration, diagnostics, and partial-stroke testing.
Read more
Quick view

METSO D201925

Function / Working Principle:​
Each of the 32 (or 16, depending on rack firmware revision) input channels accepts a 24 V DC wet contact or solid-state sensor signal from field devices — limit switches, proximity sensors, motor run status, ESD pushbutton contacts, etc. Optical isolation decouples field-side voltage transients from the system backplane. The module samples inputs at a configurable scan rate, applies software debounce filtering, and presents the binary state to the control engine for logic, interlocking, and alarm evaluation. LED indicators show per-channel ON/OFF status and module health. The module is hot-swappable in a live DNA rack.
Read more
Quick view

Metso D202593

Product Name:​ Metso VALMET D202593 / D202593L I/O Communication & Machine Monitoring Module
Product Introduction:​ Part of Metso/Valmet's distributed control and condition monitoring system used in pulp & paper, power, and heavy process industries. The D202593L variant supports redundancy, data logging, and vibration/condition monitoring integration.
Read more
Quick view

Metso IOP371

Product Name:​ S800 I/O RTD (Resistance Temperature Detector) Input Module — IOP371
Product Introduction:​ 8-channel RTD input module for Valmet DNA / Metso S800 distributed I/O system; provides high-accuracy temperature measurement with full channel-to-channel and channel-to-bus isolation, supporting 2-, 3-, and 4-wire RTD connections.
Read more
Quick view

Metso PDP401

Product Introduction:​
The Metso PDP401 is a microprocessor-based industrial automation device used either as a smart valve positioner for pneumatic control valves in process plants, or as a compact Distributed Processing Unit (DPU) in Metso DNA / Valmet DNA distributed control systems. It converts a 4–20 mA analog control signal into a precise pneumatic output to position the valve, or performs real-time I/O scanning, logic, and communication in a DCS node.
Read more
Quick view