Show sidebar
Show 9 12 18 24
Clear filters

GE IC693MDR390C

Product Overview

The IC693MDR390C is a single‑slot mixed I/O module from GE Fanuc (Emerson Automation) for the Series 90‑30 PLC platform, integrating 8 channels of 24VDC discrete input (sinking/sourcing) and 8 channels of normally‑open relay output (2 groups × 4 channels, independent commons). It features 1500VAC field‑to‑logic optical isolation and 500VAC group‑to‑group isolation to block noise and transients, supporting 15–32VDC input voltage and 5–30VDC/5–250VAC output voltage. The module delivers 2A max per output channel and 4A max per group common, with 70 mA 24V relay supply and 80 mA 5V backplane power draw. It offers 7 ms typical input response and ≤15 ms output response, with channel‑level LEDs for input/output status, serving as a compact, integrated interface for combined sensing and actuation in industrial automation.
Read more
Quick view

GE IC693PBM200 PROFIBUS-DP Master Module

The IC693PBM200 is a PROFIBUS-DP Master communication module designed for the GE Fanuc Series 90-30 PLC system. It functions as the primary interface between the PLC and a PROFIBUS-DP fieldbus network, enabling high-speed data exchange with distributed field devices, remote I/O stations, drives, and other automation equipment. The module scans all configured slave devices, sending outputs and reading inputs, with support for up to 125 DP slaves and 244 bytes of input plus 244 bytes of output data per slave.
Read more
Quick view

GE IC693PCM311 Programmable Coprocessor Module

The GE IC693PCM311 is a high-performance Programmable Coprocessor Module (PCM) for the GE Fanuc Series 90-30 PLC platform . It is designed to expand the capabilities of the host PLC by executing complex control algorithms, data processing, and serial communications that would be difficult or impossible for the PLC’s CPU to handle alone. Supporting MegaBasic and C programming languages, the module provides a powerful, flexible platform for custom automation solutions . It features two configurable serial ports accessible via a single front-panel connector, enabling simultaneous communication with a wide variety of external devices .
Read more
Quick view

GE IC693PWR321

Product Introduction

The IC693PWR321 is a standard 30-watt power supply module dedicated to the GE Fanuc Series 90-30 PLC system, designed to mount in the leftmost slot of Series 90-30 baseplates and power the CPU, I/O modules, and peripheral components. It accepts a wide input range of 85-264 VAC (50/60 Hz) or 100-300 VDC, delivering three stable outputs: +5 VDC for logic circuits, +24 VDC (relay) for relay output modules, and isolated +24 VDC for input modules and internal module circuits. The module integrates overvoltage, overcurrent, and short-circuit protection, plus smart switch fusing and advanced diagnostics, ensuring reliable power delivery in industrial environments. It uses six user terminals for input wiring, maintains 20 ms minimum holdup time during power dips, and operates within a wide temperature range, serving as a foundational component for Series 90-30 system power integrity.
Read more
Quick view

GE IC693PWR322F

Product Overview

The IC693PWR322F is a single‑slot DC‑input power supply module from GE Fanuc (Emerson Automation) for Series 90‑30 PLC systems, delivering +5VDC (logic), +24VDC Relay (output modules), and +24VDC Isolated (field devices) with 30W total output and 50W input power. It operates from 18–56VDC (21VDC minimum start), providing 1500VAC isolation between outputs and input, with over‑current/over‑voltage protection and LED status indicators. It fits standard Series 90‑30 baseplates, supporting CPU logic, I/O modules, and field loads in industrial automation with no internal battery backup.
Read more
Quick view

GE IC693PWR324

Product Introduction

The IC693PWR324 is a 30-watt AC/DC input power supply module for the GE Fanuc Series 90-30 PLC system, installed in the leftmost slot of Series 90-30 baseplates to power CPUs, I/O modules, and peripheral components. It accepts 85-264 VAC (50/60 Hz) or 100-300 VDC input, delivering three stable outputs: +5 VDC for logic circuits, +24 VDC (relay) for relay output modules, and isolated +24 VDC for input modules and internal circuits. The module integrates overvoltage, overcurrent, and short-circuit protection, with 20 ms minimum holdup time during power dips, and uses a detachable terminal board for field wiring. It features four top-mounted LEDs (PWR, OK, RUN, BATT) for status monitoring, supports RS-485 communication, and operates in 0°C - 60°C environments, serving as a foundational power component for Series 90-30 system integrity.
Read more
Quick view

GE IC693PWR330

Product Overview

The IC693PWR330 is a single‑slot, high‑capacity power supply module from GE Fanuc (Emerson Automation) for Series 90‑30 PLC systems, designed to deliver 30W total output with flexible power distribution—all 30W can be allocated to the +5VDC output for high‑current logic loads, while also providing +24VDC Relay (for output modules) and isolated +24VDC (for field devices). It accepts 85–264 VAC (50/60 Hz) or 100–300 VDC input, with 1500VAC isolation between outputs and input, over‑current/over‑voltage protection, and 4A peak inrush current tolerance (250 ms max). The module fits the leftmost slot of Series 90‑30 baseplates, delivering 6A max +5VDC, 0.625A max +24VDC Relay, and 0.833A max isolated +24VDC, with LED indicators for power and output status, ensuring stable backplane power for large CPU/module configurations in industrial automation.
Read more
Quick view

GE IC693PWR331D

Product Introduction

The IC693PWR331D is a high-capacity 30-watt power supply module designed exclusively for the GE Fanuc Series 90-30 PLC system, installed in the leftmost slot of Series 90-30 baseplates to supply power to CPUs, I/O modules, and peripheral devices. It is a DC-input module that operates on a 24 VDC nominal input with a wide range of 18-30 VDC, delivering three configurable outputs: +5 VDC (max 30 W for high-current logic needs), +24 VDC (relay) for relay output modules, and isolated +24 VDC for input modules and internal circuits. The module integrates overvoltage, overcurrent, and short-circuit protection with auto-shutdown, maintains a 20 ms minimum holdup time during voltage dips, and features four top-mounted LEDs for status monitoring (PWR, OK, RUN, BATT). It includes an RS-485 port for diagnostics and uses a detachable terminal board for simplified wiring, serving as a high-current power solution for Series 90-30 systems requiring enhanced +5 VDC capacity.
Read more
Quick view

GE IC693TCM302

Product Overview

The IC693TCM302 is a high‑performance 8‑channel temperature control module from GE Fanuc (Emerson Automation) for Series 90‑30 PLC systems, integrating 8 thermocouple inputs (J, K, L types) and 8 PWM relay outputs in a single slot. It supports closed‑loop PID control or open‑loop manual control per zone, with 12‑bit (0.2°C) resolution, ±1°C accuracy, and automatic cold junction compensation via 1 RTD channel or external reference. The module provides 18–30VDC relay outputs (100mA per channel), open thermocouple/reverse connection detection, and LED status indicators for quick diagnostics, fitting standard Series 90‑30 baseplates to control 8 independent temperature zones in industrial processes.
Read more
Quick view

GE IC693TCM302B

Product Introduction

The IC693TCM302B is an 8-channel temperature control module for the GE Fanuc Series 90-30 PLC system, managing eight independent temperature zones with thermocouple/RTD inputs and PWM discrete outputs. It supports open-loop manual control and closed-loop auto PID control, delivering ±1°C temperature accuracy and 12-bit (0.2°C) resolution. Revision B enhances temperature range and diagnostic capabilities, integrating seamlessly with Series 90-30 PLCs to simplify complex industrial temperature regulation. It features open thermocouple/reverse connection detection, out-of-tolerance monitoring, and programmable PWM outputs (0.1–60 seconds) for precise heating/cooling control, serving as a high-performance solution for multi-zone temperature management in industrial automation.
Read more
Quick view
Placeholder
Placeholder

GE IC694ALG222GE

Product Overview

The IC694ALG222GE is a high‑density 16‑channel analog voltage input module from GE Fanuc (Emerson Automation) for PACSystems RX3i PLCs, offering 16 single‑ended or 8 differential voltage inputs configurable per channel to 0–10V (unipolar) or -10–+10V (bipolar) ranges. It delivers 12‑bit resolution, ±0.25% full‑scale accuracy at 25°C, and ±0.5% full‑scale accuracy over the operating range, with 6ms update for all 16 single‑ended channels or 3ms for all 8 differential channels. The module provides 1500VAC input‑to‑backplane isolation, 41Hz/82Hz selectable input filters, and LED diagnostics (Module OK, Power, Channel Faults). It fits any RX3i I/O slot, requiring +5VDC backplane power (112mA) and isolated +24VDC external power (41mA), converting voltage signals from sensors/transmitters into digital data for real‑time process control in industrial environments.
Read more
Quick view

GE IC694ALG223

Product Introduction

The IC694ALG223 is a 16-channel single-ended analog current input module for PACSystems RX3i/RX7i, converting industrial 4-20 mA, 0-20 mA, and 4-20 mA Enhanced current signals to 12-bit digital data for PLC processing. Each channel is independently configurable, factory-calibrated, and features open-wire detection in Enhanced mode. It integrates 250 VAC optical isolation, high/low alarm limits, and hot-swap capability for mission-critical process and discrete applications. The module uses a detachable terminal board, has two status LEDs (Module OK, User Power), and occupies one chassis slot, serving as a high-density, high-precision solution for industrial signal acquisition.
Read more
Quick view