Densan DVE-440(9214) - Image 1
Click to enlarge
Densan DVE-102A
Densan DVE-102A
Back to products
Densan DVE-486-20A (9295A)
Densan DVE-486-20A (9295A)

Densan DVE-440(9214)

Product Name
Densan DVE-440(9214) VME industrial board.
Product Overview
Densan DVE-440(9214) is listed in industrial surplus channels as a Densan VME board for factory automation, SMT, industrial PC, controller and MRO applications. The 9214 marker is treated as the board revision or internal production code. Complete factory electrical documentation was not retrieved.
Category:
Description
Technical Specifications
  • Product class: VME board.
  • Revision marker: 9214.
  • Processor, memory, I/O channel count and firmware details: not included in retrieved public documentation.
  • Power requirement: confirm from the original VME backplane specification and Densan nameplate label.
Key Features
  • Modular VME form for legacy automation systems.
  • Supported as a spare and repair part through industrial MRO suppliers.
  • Interchangeable only with the identical DVE-440(9214) revision in the same equipment model.
Application Scenarios
  • Factory automation controllers.
  • SMT production equipment.
  • Industrial PC and PLC support hardware.
  • Legacy test, scientific and process-control systems.
Performance Parameters
  • Clock, data-transfer rate, latency and I/O capacity are not included in retrieved public documentation.
  • Performance validation must be completed on the original equipment bench with the approved firmware image.
Material Composition
  • Industrial multilayer PCB with VME edge connectors.
  • Surface-mount logic, memory and interface components.
  • FR4 laminate with conformal coating option according to the original equipment environment.
Structural Characteristics
  • VME edge connector for backplane insertion.
  • Onboard IC clusters for processing, memory and I/O according to the original design.
  • Mechanical holes and brackets compatible with the host VME card cage.
Working Principle
The board participates in VMEbus transactions by receiving address and data cycles from the backplane, executing onboard logic, and returning results to processors, I/O modules or system memory according to the installed firmware.
Installation Requirements
  • De-energize the VME chassis before insertion.
  • Match slot position, jumper settings and backplane signal definition to the original system manual.
  • Verify board revision 9214 against the bill of materials for the host machine.
  • Check cooling airflow and panel grounding before closing the enclosure.
Usage Precautions
  • Use anti-static handling procedures for all ICs and connectors.
  • Do not operate the board if the 9214 revision label is illegible or mismatched.
  • Keep the board away from oil mist, conductive dust and uncontrolled humidity.
  • Perform functional testing on the original fixture before returning it to production service.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Densan DVE-440(9214)”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view