Schenck FSM 006A64 - Image 1
Schenck FSM 006A64 - Image 2
Click to enlarge
Schenck FSM 006A64
Schenck FSM 006A64 - Image 2
Schenck FSE-L003
Schenck FSE-L003
Back to products
Honeywell FS-SDO-0824
Honeywell FS-SDO-0824

Schenck FSM 006A64

  • Product Name: Precision Servo Actuator (Se@vis Series Execution Drive)
  • Product Introduction: This unit is a motorized actuator manufactured by SAACKE​ (often associated with Schenck balancing/combustion systems), designed to receive controller signals and mechanically drive air dampers, fuel valves, or throttle plates in combustion management systems.
Category:
Description
  • Technical Specifications:
    • Nominal Torque: 6 Nm
    • Self-Holding Torque: 11 Nm (mechanical lock on signal loss)
    • Supply Voltage: 230 V AC (50/60 Hz)
    • Rotation Angle: 0°–90° or 0°–120° (selectable)
    • Protection Class: IP54
  • Functional Features:
    • Closed-Loop Positioning: Integrates a feedback potentiometer to report actual shaft position to the controller.
    • Fail-Safe Locking: Self-holding capability prevents valve drift during power loss.
    • Anti-Condensation: Internal heating resistor to prevent moisture buildup in humid boiler environments.
  • Structure & Material: Square motor housing with integrated junction box and gearing mechanism; typically die-cast aluminum or reinforced polymer casing.
  • Application Scenarios: Boiler burner management, rotary furnace air-fuel ratio control, industrial ovens, and thermal process plants.
  • Installation Requirements: Mounted directly on the linkage of the damper or valve shaft; requires secure coupling to avoid mechanical play.
  • Usage Notes: Not a cabinet electronic module; it is a field-mounted electromechanical device. Ensure electrical connections are sealed against moisture ingress.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Schenck FSM 006A64”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view