GE IC693CBL313
Technical Specifications:
- Input Channels: 4 channels (supporting cascade expansion up to 32 channels).
- Input Type: Digital input (compatible with NPN/PNP sensors).
- Input Voltage Range: DC 24V (compatible with 12-30V wide voltage range).
- Response Time: ≤2ms (typical value).
- Isolation Characteristics: Channel-to-channel optical isolation with an isolation voltage ≥2000Vrms.
- Operating Temperature: -40°C to 70°C (wide temperature design).
GE IC693BEM331
Technical Specifications:
- Compatible PLC Series: GE 90-30 series PLCs (e.g., IC693CPU311K, IC693CPU321K, IC693CPU331L, and higher versions).
- Firmware Requirement: Firmware version 5.0 or higher.
- Number of Devices Supported: Up to 31 Genius devices can be connected.
- Data Handling Capacity: Processes up to 128 bytes of input and output data from field devices on the bus.
- Communication Protocols: Supports Genius communication protocol.
GE IC693BEM331
Technical Specifications:
- Compatible PLC Series: GE 90-30 series PLCs (e.g., IC693CPU311K, IC693CPU321K, IC693CPU331L, and higher versions)
- Firmware Requirement: Firmware version 5.0 or higher
- Number of Devices Supported: Up to 31 Genius devices can be connected
- Data Handling Capacity: Processes up to 128 bytes of input and output data from field devices on the bus
- Communication Protocols: Supports Genius communication protocol
GE IC693APU300
Technical Specifications:
- Processor: 80C186XL, with a clock speed of 33 MHz
- Memory: 512 KB
- Input Channels: 12 source inputs (12 positive logic inputs)
- Output Channels: 4 positive logic outputs
- Input Voltage Range: 5 V DC or 10 to 30 V DC
- Output Voltage Range: 4.7 to 40 V DC
- Maximum Count Rate: 80 kHz
GE IC693ALG392
Technical Specifications:
- Output Channels: 8 single-ended channels
- Output Types: Configurable for voltage (0–10 V, ±10 V) or current (0–20 mA, 4–20 mA)
- Resolution: 15–16 bits for high-precision signal generation
- Update Rate: 8 milliseconds per channel (all channels updated every 8 ms)
- Power Supply: Isolated 24 VDC (ensures stability amid power fluctuations)
- Operating Temperature: -20°C to +50°C (storage range: -40°C to +70°C)
GE IC693ALG222
Technical Specifications:
- Input Type: Analog voltage input
- Number of Channels: 16 single-ended or 8 differential channels
- Input Range: Configurable for various voltage ranges, typically including 0-10V, ±10V, and other industry-standard ranges
- Resolution: 12-bit digital resolution for accurate signal conversion
- Accuracy: ±0.1% of full scale for precise measurements
- Conversion Time: Fast conversion rate, typically less than 1 ms per channel
GE IC676PBI016
GE IC670ALG230
Technical Specifications:
- Input Channels: 8 single-ended analog current input channels.
- Supported Signal Ranges: Configurable for 0–20 mA or 4–20 mA current loops.
- Resolution: 12-bit digital resolution; 5.0 μA analog resolution.
- Conversion Time: 60 μs per channel (typical) under a 1 MHz module clock.
- Input Impedance: 2.87 kΩ.
- Isolation: Each channel provides ground and logic isolation rated at 1500 VAC for 1 minute (continuous 250 VAC).
GE IC660EPM100J
Technical Specifications:
- Input/Output Configuration: The module supports a combination of digital inputs and outputs, with a typical configuration of 8 outputs.
- Output Type: Transistor outputs (sourcing or sinking, depending on configuration).
- Output Voltage: 24 VDC.
- Output Current: Each output point can handle a maximum of 0.5 A (sinking) or 0.3 A (sourcing).
- Response Time: The typical response time is less than 1 ms, ensuring real-time control and monitoring.
- Isolation Voltage: The module provides 500 VAC isolation between the field side and the logic side, enhancing system safety and reliability.
GE IC200UDR064
Technical Specifications:
- Input/Output Configuration: The module supports a combination of digital inputs and outputs, typically featuring 16 points (configurable as input or output).
- Input Specifications:
- Input voltage range: 24 VDC (±25% tolerance).
- Input current: Approximately 3 mA per input.
- Input response time: Less than 1 ms.
GE IC200PWR102E
Technical Specifications:
- Input Voltage: Supports a wide AC input range of 85-264 VAC (single-phase), accommodating global power standards.
- Output Voltage: Provides +5 VDC (logic power) and +24 VDC (sensor/communication power) to meet the power requirements of different modules.
- Output Current:
- +5 VDC output: Up to 2.0 A
- +24 VDC output: Up to 0.8 A
- Total Output Power: Approximately 10 watts.
GE IC200PWR102D
Technical Specifications:
- Input Voltage: Supports a wide AC input range, typically 85-264 VAC (single-phase), accommodating global power standards.
- Output Voltage: Provides 5 VDC and 3.3 VDC outputs to meet the power requirements of different modules within the VersaMax system.
- Output Current: The total output current is rated at 1.5 A, with specific current limits for each output voltage (e.g., 1.0 A at 3.3 VDC and 0.5 A at 5 VDC under certain conditions).
- Power Efficiency: Designed for high efficiency, minimizing energy loss and reducing operational costs.
