Show sidebar
Show 9 12 18 24
Clear filters

ABB 347543 (115VAC Rated Input) Industrial Control Relay / Auxiliary Relay

Technical Specifications

  • Electrical Parameters:
    • Input (Coil):
      • Rated voltage: 115VAC (50/60 Hz, dual-frequency compatible)
      • Coil power consumption: 5VA (typical, at rated voltage)
      • Coil resistance: 2.5kΩ (at 25°C, measured value)
      • Pull-in voltage: ≤85% of rated voltage (≤97.75VAC)
      • Release voltage: ≥10% of rated voltage (≥11.5VAC)
    • Output (Contacts):
      • Contact configuration: 2 Form C (Changeover) contacts (1 Normally Open (NO) + 1 Normally Closed (NC) per pole)
      • Rated contact current: 10A (resistive load, AC-15) at 250VAC; 5A (inductive load, AC-1) at 250VAC
      • Maximum switching voltage: 250VAC / 30VDC
      • Maximum switching power: 2500VA (AC) / 150W (DC)
      • Contact material: Silver-nickel (AgNi) alloy (for low contact resistance and high arc resistance)
Read more
Quick view

ABB 3ADT220090R0003 SDCS-POW-1

Technical Specifications

  • Input Voltage:
    • AC Input: 100 V AC to 240 V AC (wide-range, 50/60 Hz)
    • Input Voltage Tolerance: ±10% of rated input
    • Input Current: 2 A (max) at 100 V AC; 1 A (max) at 240 V AC
  • Output Voltage & Current:
    • DC Output: 24 V DC (regulated, fixed output)
    • Output Current: 5 A (continuous rating); 7 A (peak rating, 10 seconds max)
    • Output Voltage Regulation: ±0.5% (load regulation); ±0.2% (line regulation)
    • Ripple & Noise: ≤ 50 mV (peak-to-peak) at full load
  • Efficiency & Power:
    • Typical Efficiency: 85% at full load (24 V DC, 5 A)
    • Maximum Power Output: 120 W (24 V DC × 5 A)
Read more
Quick view

ABB 3ADT220090R0003 SDCS-POW-1 Power Supply Module

Product Overview The ABB 3ADT220090R0003 SDCS-POW-1 is a power supply module designed for industrial automation applications. It provides stable and reliable power to various devices such as PLCs, DCS, sensors, and actuators. The module supports distributed control systems (DCS) and programmable logic controllers (PLC) by offering multiple DC output channels, ensuring precise and efficient power distribution in industrial environments.
Read more
Quick view

ABB 3ADT312511P2103 SDCS-PIN-20XB Control Module

Product Overview The ABB 3ADT312511P2103 SDCS-PIN-20XB is a specialized control module designed for integration into industrial automation systems. It serves as a key component in managing and regulating various control functions within machinery and equipment, ensuring stable and efficient operation. This module is particularly suited for applications requiring precise control and monitoring capabilities. Technical Specifications
  • Model Number: 3ADT312511P2103
  • Series: SDCS-PIN-20XB
Read more
Quick view

ABB 3AFE61320946P0001 LDMUI-01 Universal Input/Output Module

Product Overview The ABB 3AFE61320946P0001 LDMUI-01 is a universal input/output module designed for industrial automation applications. It serves as a versatile interface for collecting and outputting analog and digital signals, enabling seamless integration into various control systems. This module is particularly suited for process control, discrete control, and data acquisition tasks. Technical Specifications
  • Model Number: 3AFE61320946P0001
  • Analog Inputs: 4 channels, supporting 0-10V voltage or 4-20mA current signals for sensor data acquisition (e.g., temperature, pressure, flow).
Read more
Quick view

ABB 3ASC25H203 DAPC100 Control Board

Product Overview The ABB 3ASC25H203 DAPC100 is a high-performance control board designed for industrial applications, particularly in motor control and automation systems. It serves as a core component in ABB's industrial transmission and variable frequency control systems, enabling precise control of motor speed, torque, and direction. This board is engineered to ensure high reliability, adaptability, and stability in demanding industrial environments.
Read more
Quick view

ABB 3ASC25H204 DAPU100 Digital Input Module

Technical Specifications

  • Module Type: 16-channel digital input module
  • Input Signal Type: Dry contact (NO/NC) or voltage input (sourcing/sinking)
  • Number of Input Channels: 16 independent channels (grouped into 2 banks of 8)
  • Input Voltage Range: 24V DC (nominal); 19.2V DC to 30V DC (operating range)
  • Input Current: 3mA to 10mA per channel (at 24V DC)
  • Input Response Time: <1ms (typical); configurable up to 100ms (for noise filtering)
  • Isolation:
    • Channel-to-channel: 500V AC (reinforced insulation, 1 minute)
    • Input to backplane: 2.5kV AC (reinforced insulation, 1 minute)
  • Noise Immunity: ±2kV (ESD, IEC 61000-4-2); ±1kV (EFT, IEC 61000-4-4)
  • Power Supply: Derived from S800 I/O backplane (no external power required)
  • Operating Temperature Range: -25°C to +60°C (standard); -40°C to +70°C (extended, with derating)
Read more
Quick view

ABB 3ASC25H209 (DATX110) 16-channel Digital Output Module

Technical Specifications

  • Output Type: Sinking (NPN), solid-state (transistor)
  • Number of Output Channels: 16 channels
  • Load Voltage: 24VDC (nominal), maximum 30VDC
  • Output Current: Maximum 0.5A per channel
  • On-state Voltage Drop: ≤1.5V
  • Isolation: 500VAC (reinforced insulation) between channels and ground
  • Response Time: <0.2ms (turn-on), <0.5ms (turn-off)
  • Operating Temperature Range: 0°C to +60°C (standard), -25°C to +70°C (extended, on request)
  • Communication Interface: RS485; supports multiple communication protocols like Modbus and Profibus
  • Bus Interface: S800 I/O bus (for AC 800M)
  • Mounting Method: 40mm wide DIN rail mounting
  • Dimensions: 100mm x 50mm x 20mm
  • Protection Level: IP20
  • Compliance: IEC 61131-2, IEC 61000-6-2/6-4 (EMC), UL, CSA
  • Redundancy Support: Yes, dual-module and dual-power supply configuration
  • Compatibility: AC 800M, Symphony Plus, 800xA DCS
Read more
Quick view
Placeholder
Placeholder

ABB 3ASC25H209 DATX110 Variable Frequency Drive (VFD) Control Module

Product Overview The ABB 3ASC25H209 DATX110 is a high-performance control module designed for variable frequency drives (VFDs) in industrial automation systems. It integrates advanced signal processing, control algorithms, and communication capabilities to enable precise control of AC motor speed, torque, and direction. This module is suitable for a wide range of applications requiring reliable and efficient motor control, such as power generation, water treatment, and manufacturing.
Read more
Quick view

ABB 3AUA0000110429 BCU-02 Control Module

Product Overview The ABB 3AUA0000110429 BCU-02 is a versatile industrial control module designed for automation systems. It serves as a core component in distributed control systems (DCS) and programmable logic controllers (PLC), enabling precise control and monitoring of industrial processes. The module supports various communication protocols and can be integrated into different automation architectures to enhance system flexibility and reliability.
Read more
Quick view

ABB 3AUA0000110429 BCU-02 Control Unit Module

Technical Specifications

  • Electrical Parameters
    • Operating voltage: AC 220V or DC 24V (different versions have different voltages).
    • Input signal: SSI signal.
    • Relay contact capacity: AC 220V/3A or DC 125V/3A.
    • Input current: Maximum 5mA or 0.5A.
    • Output frequency: 100Hz.
  • Performance Parameters
    • Processing speed: 550μs.
    • Program capacity: 300.
    • Data capacity: 200.
    • Maximum system I/O capacity: 192 channels.
  • Environmental and Protective Parameters
    • Operating temperature range: -20°C to 45°C (some versions are -20°C to 55°C).
    • Protection level: IP20.
  • Physical Parameters
    • Dimensions: 76mm×152mm×250mm.
    • Weight: 1kg (transport weight is 2kg).
  • Other Parameters
    • Processor: ARM Cortex A9 dual-core processor.
    • Memory: 1GB RAM and 4GB storage.
    • Communication interface: Supports Modbus protocol, Ethernet, serial port, RS-485, CAN bus, etc.
Read more
Quick view

ABB 3BDH000320R0101 LD800HSE Bus Module

Product Overview The ABB 3BDH000320R0101 LD800HSE is a Foundation Fieldbus (FF) bus interconnect device designed to facilitate communication between HSE (High-Speed Ethernet) and H1 fieldbus networks. It serves as a critical gateway in automation systems, enabling seamless integration of field devices with upper-level control systems.
Read more
Quick view