Shop

Product Introduction The ABB CI858K01 3BSE018135R1 is a high-performance communication module designed for industrial automation systems. It facilitates reliable and high-speed data exchange between controllers and field devices, supporting various communication protocols to meet different application requirements. This module is typically used in conjunction with ABB's automation systems, such as the ABB 800xA system, for monitoring and controlling industrial processes across sectors like power generation, manufacturing, chemical processing, and water treatment. Technical Specifications

• Communication Protocols: Supports multiple protocols including PROFIBUS DP, Modbus TCP, Profinet IO, and EtherNet/IP.

• Communication Specifications
  • Protocols: Supports multiple industrial communication protocols such as PROFIBUS, PROFINET, EtherCAT, Modbus RTU, ABB Drives, ABB SPA-bus, and DriveBus.
  • Interface Type: DriveBus interface, RJ45, 25-pin D-type connector.
  • Transmission Rate: Up to 40000 kbit/s, 1 Mbps, or 1.5 Mbps (different parameter sources, subject to actual products).
  • Number of Nodes: Supports up to 32 nodes or 64 field device nodes (different parameter sources, subject to actual products).
  • Cable Length: Maximum 1000 meters.

Technical Specifications:

• Dimensions: 127.5 mm (length) × 18.5 mm (height) × 59 mm (width)
• Weight: 0.55 kg
• Operating Voltage: 24 V DC (supplied via CEX bus, no external power required)
• Power Consumption: Typically less than 4 W
• Operating Temperature: -40°C to +85°C (wide temperature range option available)
• Storage Temperature: -40°C to +80°C
• Relative Humidity: 0-95% (non-condensing)

Product Introduction The ABB CI861 3BSE058590R1 is a high-performance communication interface module designed for industrial automation systems. It serves as a bridge between the ABB AC 800M controller and various field devices, enabling seamless data exchange and integration. The module supports multiple industrial communication protocols, making it suitable for connecting diverse equipment from different manufacturers. Its robust design ensures reliable operation in harsh industrial environments, while its flexible configuration options meet various application needs.

Technical Specifications

• Communication Protocol: Modbus TCP (OSI layer 7).
• Channels: 2 independent channels. Channel 1 is 10/100 Mbit/s full - duplex, and Channel 2 is 10 Mbit/s half - duplex.
• Device Capacity: Supports up to 70 slaves + 8 masters.
• Redundancy & Hot - swap: Has module redundancy and hot - swap function.
• Hardware Interfaces: Connects to the CEX bus, and the network interface is an RJ - 45 female connector. It allows 12 units on the CEX bus.
• Power Consumption: Typical 160 mA @ 24 V DC.
• Physical Parameters: Dimensions are 185 mm x 59 mm x 127.5 mm, and the weight is 700 g.
• Operating Temperature: Up to 55 °C.
• Protection Level: IP20.

Technical Specifications:

• Communication Protocol Support: The CI867K01 supports redundant communication over optical fiber networks, operating within ABB’s High Speed Ethernet (HSE) architecture. It is compatible with the IEC 61850 standard for substation automation and integrates with redundant network topologies.
• Network Interface: Features dual redundant fiber optic ports for establishing high-speed, noise-immune communication links, typically operating at 100 Mbps.
• Redundancy: Designed for use in redundant system configurations, supporting Automatic Standby Switching (ASS) to ensure uninterrupted data transmission in case of network or hardware failure.
• Data Transfer Rate: Provides high-speed data transfer capabilities suitable for time-critical control and monitoring applications.
• Power Supply: Operates on standard 24 VDC industrial power, with low power consumption and high electrical isolation to enhance system safety.
• Environmental Specifications: Rated for operation in industrial environments with an extended temperature range, typically from -20°C to +70°C, and high resistance to electromagnetic interference (EMI).
• Mounting: Designed for DIN rail mounting, compatible with standard control cabinet installations.