Woodward PEAK200-HVAC 8200-1501
Technical Specifications:
- Model Number: 8200-1501
- Controller Type: Digital microprocessor-based HVAC controller
- Supply Voltage: 24 V AC ± 10%, 50/60 Hz
- Power Consumption: Less than 15 VA
- Operating Temperature: 0°C to +50°C
- Storage Temperature: -25°C to +70°C
- Humidity Range: 5% to 95% relative humidity, non-condensing
BENTLEY 3500/65 145988-02
Technical Specifications:
- Module Type: Keyphasor and Speed Monitoring Module
- Part Number: 145988-02
- System Platform: Bently Nevada 3500 Series Rack
- Input Channels: Accepts signals from one or two Keyphasor or speed sensors (configurable)
- Sensor Compatibility: Compatible with Bently Nevada proximity probes (e.g., 3300 series) and other active or passive speed sensors
- Frequency Range: 0.1 Hz to 20,000 Hz (suitable for low-speed to high-speed machinery)
- Speed Measurement Accuracy: ±0.05% of reading
SAACKE FSC-01
Technical Specifications:
- Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
- Power Consumption: Low power draw, optimized for continuous operation
- Operating Temperature: -10°C to +55°C
- Storage Temperature: -25°C to +70°C
- Humidity Range: 5% to 95% relative humidity, non-condensing
- Protection Rating: IP20 (suitable for indoor panel mounting)
- Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
- Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
PARKER AR-04AE-13574
BENDER IRDH575B1W-435
Technical Specifications:
-
- Rated Voltage: Up to 690 V AC, 24–300 V DC
- Measuring Range: 0 to 999 kΩ (depending on voltage level)
- Response Time: Rapid detection time for insulation faults
- Operating Temperature: -10°C to +60°C
- Storage Temperature: -25°C to +70°C
- Humidity Range: 0% to 95% relative humidity, non-condensing
- Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
- Display: LCD display for status indication and parameter setting
GE PQMII-T20
Technical Specifications:
- Measurement Standards: IEC 61000-4-30 Class A compliant for power quality monitoring
- Voltage Inputs: 3-phase or single-phase configurations, typical ranges up to 690 V AC
- Current Inputs: Compatible with Rogowski coils, CTs (current transformers), or clamp sensors
- Sampling Rate: High-speed sampling for transient and waveform capture
- Frequency Range: 45 Hz to 65 Hz (extendable for special applications)
- Voltage Accuracy: ±0.1% of reading
- Current Accuracy: ±0.5% of reading
- Harmonic Analysis: Up to 63rd harmonic for voltage and current
DEIF DLQ144-PC-NB
Technical Specifications:
- Supply Voltage: 24 V DC (standard industrial voltage)
- Power Consumption: Low consumption suitable for energy-efficient applications
- Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
- Storage Temperature: -40°C to +85°C
- Humidity Range: 5% to 95% relative humidity, non-condensing
- Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
- Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
- Certifications: CE, UL, and other relevant industry standards
KONGSBERG MRU-E-JB3
Technical Specifications:
- Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
- Accuracy: High accuracy across all axes with minimal latency
- Update Rate: Configurable up to 100 Hz for real-time applications
- Operating Voltage: Typically 12 to 36 VDC
- Power Consumption: Low power consumption suitable for extended operation
- Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
- Storage Temperature: -50°C to +85°C
- Humidity Range: 0% to 100% relative humidity, waterproof design
- Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
- Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
EATON XV-112-DB-70TWRC-00
Technical Specifications:
- Operating Voltage: Typically operates within standard industrial voltage ranges
- Power Consumption: Designed for efficiency with low power consumption
- Operating Temperature: Suitable for a wide range of environments, typically from -25°C to +60°C
- Humidity Range: Operates effectively in various humidity conditions without condensation
- Communication Protocols: Supports common industrial protocols like Modbus, Ethernet/IP, etc.
- Dimensions: Compact design suitable for different installation requirements
- Certifications: Meets industry standards such as UL, CE, and others relevant to industrial control equipment
ALSTOM EP3-E-4-A
Technical Specifications:
- Supply Voltage: 24 to 250 V DC or AC, allowing flexible integration into various control systems
- Power Consumption: Low power draw, optimized for continuous operation
- Operating Temperature: -25°C to +70°C
- Storage Temperature: -40°C to +85°C
- Humidity Range: 5% to 95% relative humidity, non-condensing
- Mounting Type: DIN rail mounting
- Protection Rating: IP20 (front panel), suitable for indoor panel installation
- Terminal Type: Spring clamp or screw terminals for secure wiring
- Certifications: Complies with relevant IEC, EN, and UL standards for industrial control equipment
Fireye 45UV5-1101
Technical Specifications:
- Detection Type: Ultraviolet (UV)
- Sensing Distance: Effective sensing distance up to several meters, depending on flame size and intensity
- Operating Voltage: Typically operates on 24 VDC
- Power Consumption: Low power consumption suitable for energy-efficient applications
- Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
- Storage Temperature: -40°C to +85°C
- Humidity Range: 0% to 95% relative humidity, non-condensing
ABB MCU2A02V24 Control Unit
Technical Specifications:
- Supply Voltage: 24 V DC (nominal)
- Voltage Range: 18–30 V DC
- Power Consumption: Typically less than 10 W
- Operating Temperature: -10°C to +55°C
- Storage Temperature: -25°C to +70°C
- Humidity Range: 5% to 95% relative humidity, non-condensing
- Protection Rating: IP20 (for panel-mounted applications)
- Communication Interfaces: Equipped with RS-485, Modbus RTU, and CAN bus; supports integration with higher-level control networks
- Mounting Type: DIN rail or panel mounting
- Certifications: CE, UL, and compliance with relevant IEC standards
