Shop

Technical Specifications

• Input/Output Configuration: Supports multiple digital inputs and outputs (specific configurations may vary based on model variants).
• Input Voltage: Typically 24 VDC.
• Output Voltage: Typically 24 VDC.
• Maximum Current per Channel: Varies based on model, but generally supports currents suitable for industrial actuators.
• Redundancy: TMR design with three independent channels per input/output.
• Response Time: Sub-millisecond for signal detection and actuation.
• Isolation: Each channel is electrically isolated from the system bus.
• Certifications: SIL 3 (IEC 61508), TÜV Rheinland-certified.
• Operating Temperature: -40°C to +70°C (-40°F to 158°F).
• Mounting: DIN rail or panel-mounted.
• Communication Protocol: Supports Modbus RTU/TCP for integration with PLCs, DCS, or SCADA systems.

• Technical Specifications
  • Electrical and Signal Parameters
    • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
    • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
    • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
  • Physical and Weight Parameters
    • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
    • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
  • Environmental Parameters
    • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
    • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.

Technical Specifications:

• Form Factor: Small-sized (13 × 19 mm), compact design for space-efficient installation.
• Operating Temperature: Supports up to 105°C, ensuring reliability in high-temperature industrial environments.
• Power Management: Features five distinct power modes for optimized energy efficiency and operational flexibility.
• Connectivity:
  • Wireless Options: Includes Bluetooth LE 5.0 for wireless communication and remote support capabilities.
  • Wired Options: Supports Ethernet and fieldbus protocols (specific protocols depend on configuration).

Technical Specifications

• Electrical Parameters
  • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
  • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
  • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
• Physical Parameters
  • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
  • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.

Technical Specifications

• Electrical Parameters
  • It is configured with 32 commoned digital output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
  • Each output channel can provide a maximum current of 1.7 A, the overall power consumption of the module is less than 13 watts, and some data shows that its output power can reach 15 watts.
  • It adopts a dual-power design, which further improves the stability of power supply and avoids system operation interruption caused by single power failure.
• Processing and Memory Parameters
  • It is equipped with a dual-core PowerPC processor with a clock frequency of 800 MHz, which can efficiently support complex control algorithms and logic operations.
  • The module provides a memory range of 1 GB - 8 GB, which can store a large number of control logic programs and real-time operating data to meet the needs of complex industrial control scenarios.

Product Introduction: The Triconex 3626X is a high-performance analog output module designed specifically for Tricon triple modular redundant (TMR) safety control systems. It serves as a critical component in safety instrumented systems (SIS), converting digital control signals from the Tricon processor into precise 4–20 mA analog signals. These signals directly drive field devices such as pneumatic valve positioners, frequency converters, and electric actuators, enabling closed-loop safety control functions like boiler fuel regulation and compressor anti-surge control.