FOXBORO FBM230 Serial Communication Module
Product Series: I/A Series Foundation Fieldbus Module
Product Introduction:
The FBM230 is a dual-port serial communication interface module for the Foxboro I/A Series DCS. It provides RS-232 and RS-485 communication capabilities, enabling the controller to interface with legacy devices, RTUs, PLCs, and other serial devices using Modbus RTU/ASCII protocols.
Foxboro FEM100 Foundation Fieldbus H1 Interface Module
Product Classification: Foundation Fieldbus H1 Segment Interface Module
Product Introduction:
The Foxboro FEM100 is a Foundation Fieldbus H1 interface module for the Foxboro I/A Series DCS. It provides the physical layer and data link layer connection to Foundation Fieldbus H1 segments, enabling communication with FF H1-enabled field devices including transmitters, valves, analyzers, and positioners. The FEM100 supports up to 32 FF devices per segment and provides intrinsic safety barriers for hazardous area installations.
Foxboro FCP280 Analog Output Module
Product Classification: 8-Channel / 16-Channel Analog Output Module (4–20 mA)
Product Introduction:
The Foxboro FCP280 is a dedicated analog output module for the Foxboro I/A Series DCS. It provides multiple channels of 4–20 mA current loop outputs used to control final control elements such as control valves, variable speed drives (VFDs), damper actuators, and other current-loop-driven devices. The module delivers precise, isolated analog output signals with per-channel diagnostic capability.
Foxboro P0916AC Analog Input Module
Model Series: P09 Series — I/A Series Analog Input
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The P0916AC is a 16-channel analog input module for the Foxboro I/A Series DCS. It accepts 4–20 mA, 4-wire signals from field transmitters. The "AC" variant is configured for 4-wire transmitters where loop power is supplied externally, allowing higher accuracy and isolation from the module's internal power supply.
Foxboro N-2AX+DIO Ethernet Communication Module with Digital I/O
Model Series: N-2AX Series — I/A Series Network Interface Module
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The N-2AX+DIO is a dual-port Ethernet communication module with integrated digital input/output (DIO) for the Foxboro I/A Series DCS. It provides 10/100 Mbps Ethernet connectivity for system integration, HMI access, and remote engineering, while also offering 8 digital inputs and 8 digital outputs for local discrete I/O control.
Foxboro IPM2-P0904HA Intelligent Valve Positioner
Model Series: IPM2 Series — Smart Positioner
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The IPM2-P0904HA is a HART-compatible intelligent electro-pneumatic valve positioner from the Foxboro IPM2 product family. It provides precise control of pneumatic control valves by converting a 4–20 mA control signal into a proportional pneumatic output pressure. It supports HART 5/7 protocol for digital communication and advanced diagnostics.
Foxboro FBM242 RH916YY High-Speed Counter
Product Classification: High-Speed Event Counter and Pulse Input Module
Product Introduction:
The Foxboro FBM242 with part number RH916YY is a high-speed counter and pulse input module designed for precise measurement of frequency, totalization, and event counting in the Foxboro I/A Series DCS. It accepts high-frequency pulse signals from flow meters, turbine meters, encoders, and other pulse-generating devices. The RH916YY revision identifies the specific hardware configuration of this module.
Simplex 4100-3102
Product Brief Introduction
The Simplex 4100-3102 is a dedicated field-mounted auxiliary I/O accessory module engineered exclusively to match the Simplex 4100 series intelligent addressable fire alarm control system. It serves as the intermediate signal conversion and relay switching unit between the main fire alarm controller, field fire detection devices, auxiliary building facility equipment and peripheral notification appliances. The module realizes digital bus signal parsing from the main control unit and converts parsed commands into dry contact switching signals or passive input acquisition signals for external equipment linkage control and status feedback collection.
Zygo 7702
Honeywell 05701-A-0302
Foxboro FBM219 Control Processor Module
Product Classification: 32-Bit RISC Control Processor
Product Introduction:
The Foxboro FBM219 is the primary control processor module serving as the central computing engine within the Foxboro I/A Series Distributed Control System (DCS). It executes all control strategies, sequential logic, arithmetic computations, and data management tasks for the entire control system. This module is the brain of the I/A Series architecture and interfaces directly with all I/O modules, communication modules, and operator stations.
Foxboro P0916JY Pneumatic Valve Positioner
Product Type: Special Configuration Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916JY is a special configuration variant of the P0916 series pneumatic valve positioner. The JY suffix denotes a custom or application-specific configuration typically requested for OEM integration, special signal requirements, or unique mounting arrangements. This model is configured per customer specification and may include modified input ranges, special output signals, custom mounting, or proprietary feedback linkages.
