Show sidebar
Show 9 12 18 24

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

CONTROL CHIEF 90‑20‑0‑003

Product Name: Industrial Wireless Remote Control Receiver Assembly Product Brief: Rugged industrial radio‑frequency receiving unit for locomotive, overhead crane and heavy‑duty material handling wireless remote control systems, receives radio command signals from portable transmitters and converts wireless instructions into hard‑wired relay outputs for field equipment controlControl Ch...
Read more
Quick view

Control Techniques NTE-207-CONS-0000

Product Name:​ Control Techniques (Nidec) NT Series Servo Motor — Model NTE-207-CONS-0000
Manufacturer:​ Control Techniques (now Nidec / Emerson Industrial Automation)
Product Category:​ Compact brushless AC servo motor with MS-style connectors
Read more
Quick view

Converteam MVC3001-4003A

Product Introduction:​ The MVC3001-4003A is a stand-alone cassette-style drive controller engineered by Converteam (formerly ALSTOM) for the ALSPA MV3000 family of medium-voltage DELTA inverter and MV-LCD AC drive systems. It centralizes all control, regulation, supervision and fieldbus communication functions required to operate transistor bridge and rectifier bridge power modules as a single coordinated drive. The unit is not a complete drive but the brain of the drive; it derives its auxiliary power from the associated power-stage bridge module and exchanges cyclic and acyclic data with that stage over an internal isolated link.
Read more
Quick view

CONVERTEAM P111-6052

Product Name:​ Converteam (GE Power Conversion) P111-6052 DC-Link Capacitor Module for Megalink MV Drives
Overview:
High-voltage DC-link energy buffer for medium-voltage four-quadrant drives (rolling mills, Azipod marine propulsion, CAES). Not a control card—pure power film-capacitor assembly with laminated busbar.
Read more
Quick view

COOPER GHG122

  • Product Name: Cooper Crouse-Hinds GHG122 Industrial Gas Detector or Terminal Module
  • Product Introduction: Depending on configuration, this refers either to a rugged hazardous-area gas detection transmitter (GHG series) or a heavy-duty industrial terminal/signal connection module by Cooper Crouse-Hinds.
Read more
Quick view

COOPER P3798102-00010 CN-UIM2

Product Name
Industrial touch controller / UIM controller unit
Product Description
12.1-inch TFT LCD resistive touch controller for industrial environments. Rugged housing for harsh conditions. Some listings describe a UIM card management/telecom reader unit with USB interface; industrial HMI interpretation is more consistent with CN-UIM2 controller listings.
Read more
Quick view

Coperion KCM IP65

  • Product Name: K-Tron Loss-in-Weight Feeder Controller (IP65 Rated)
  • Product Introduction: A specialized closed-loop control module for Coperion K-Tron gravimetric (loss-in-weight) and volumetric feeding systems, designed for washdown environments in food, pharma, and chemical industries.
Read more
Quick view

CORRECT Vision FVL-2X-65D-CA-LED

Product Name: Dual-Head Machine Vision LED Lighting System (65mm Diffuse) Product Introduction: Manufactured by CORRECT Vision, this specialized dual-head linear array vision lighting system uses dual-bar symmetrical illumination architecture, designed for high-speed industrial visual inspection requiring uniform, low-glare lighting.
Read more
Quick view

CS Triplex T8310C Trusted CCoat TMR Expander Processor Module

Technical Specifications

  1. Mechanical Specifications
    • Form Factor: Plug‑in module for T8300 expander chassis (occupies two leftmost processor slots)
    • Dimensions (H×W×D): 160 mm × 320 mm × 120 mm (6.3 in × 12.6 in × 4.7 in)
    • Weight: 1.33 kg (2.9 lb)
    • Front Panel: Three status LEDs (health: green = OK, active/standby: amber = active, Tx/Rx: flashing green = data transfer); TC‑301 hot link port for T8312 adapter connection
    • Mounting: Tool‑less insertion into T8300 expander chassis backplane
    • Material: Industrial‑grade printed circuit board (PCB) with conformal coating; metal housing with corrosion‑resistant finish
    • Interface: TC‑301 hot link port (for T8312 adapter connection)
  2. Electrical Specifications
    • Power Supply: 20–32 VDC dual redundant backplane power (supplied by T8300 chassis)
    • Power Consumption: 45 W maximum
    • Heat Dissipation: 45 W
    • Architecture: HIFT Triple Modular Redundancy (TMR) with majority voting
    • Clock Speed: 50 MHz module clock
    • Communication Data Rate: 250 Mbps (via TC‑301 hot link cable)
    • Isolation: 1500 VDC channel‑to‑channel and channel‑to‑chassis; 50 V basic insulation module‑to‑backplane
    • Redundancy: Hot standby and module sparing configurations supported
Read more
Quick view

CS Triplex T8432 Trusted 1oo2D 60‑Channel Dual Analog Input Module

Technical Specifications

  1. Mechanical Specifications
    • Form Factor: Trusted chassis‑mounted module (fits standard Trusted controller/expander chassis slots)
    • Dimensions (H×W×D): 241 mm × 51 mm × 181 mm (9.5 in × 2.0 in × 7.1 in)
    • Weight: 0.95 kg (2.09 lb)
    • Front Panel: 60 channel status LEDs (green = active), power LED (green), fault LED (red), hot swap release lever
    • Mounting: Tool‑less insertion into Trusted chassis (compatible with T8300 expander chassis)
    • Material: Industrial‑grade PCB with conformal coating; metal shielded enclosure for EMC compliance
    • Connectors: 96‑way C‑type backplane connector; dual redundant 24 VDC power inputs (diode‑ORed)
  2. Electrical Specifications
    • Input Signal: Configurable per channel—0–10 VDC, ±10 VDC, 0–5 VDC (voltage mode only)
    • Input Impedance: 1 MΩ (compatible with 2‑wire/3‑wire voltage transmitters)
    • Power Supply: 20–32 VDC redundant backplane supply (24 VDC nominal)
    • Power Consumption: < 7 W maximum
    • Resolution: 16‑bit (152.6 μV LSB for 0–10 VDC; 305.2 μV LSB for ±10 VDC; 76.3 μV LSB for 0–5 VDC)
    • Accuracy: 0.05% of full scale (calibrated)
    • Update Rate: 100 ms per channel (configurable via Trusted software)
    • Isolation: 2500 VDC galvanic isolation between channels and backplane
    • Overrange Protection: ±15 VDC (no damage); reverse polarity protection (-32 VDC to +40 VDC)
    • Diagnostics: On‑board open/short circuit detection; 1oo2D voting discrepancy alerts; 1 ms SOE reporting
Read more
Quick view

CS Triplex T8800 Trusted 40‑Channel 24 VDC Digital Input Field Termination Assembly

Technical Specifications

  1. Mechanical Specifications
    • Form Factor: Field‑mounted FTA (compatible with Trusted T8400 digital input modules)
    • Enclosure: Cast‑aluminum, IP65‑rated for dust and water ingress protection
    • Dimensions (H×W×D): 254 mm × 203 mm × 152 mm (10.0 in × 8.0 in × 6.0 in)
    • Weight: 3.0 kg (6.61 lb)
    • Front Panel: 40 channel status LEDs (green = active), 5 group power LEDs, power LED (green), fault LED (red), locking field connectors
    • Mounting: Wall/pipe‑mountable (DIN rail adapter optional)
    • Connectors: 2 × 24‑way heavy‑duty field connectors; 96‑way C‑type backplane connector for module interface
    • Fuses: 5 × 8‑channel group fuses (2 A, fast‑acting) for field power protection
Read more
Quick view