Show sidebar
Show 9 12 18 24

GE IC695ACC412

Product Overview

The IC695ACC412 is a capacitor-based energy pack accessory for the GE Fanuc PACSystems RX3i IC695CPE330 controller, preserving user memory during power loss via an internal capacitor array. It mounts at the energy pack bottom, provides 60 seconds of typical memory retention, charges fully in 60–90 minutes, and uses IN/OUT/STAT LEDs for status/charging. The module carries T4A temperature code, suits Class I, Division 2, Groups A–D hazardous locations, and meets UL/CE safety standards, ensuring data integrity for mission-critical industrial control systems.
Read more
Quick view

GE IC695ALG600

Product Introduction

The IC695ALG600 is an 8-channel universal analog input module for PACSystems RX3i, split into 2 isolated groups of 4 channels, plus 2 dedicated Cold Junction Compensation (CJC) channels for thermocouple accuracy. It is fully software-configurable via Proficy Machine Edition (no jumpers), supporting individual channel setup for voltage, current, thermocouple, RTD, and resistance inputs. It offers 6 selectable hardware filter frequencies (8–1000 Hz), 11–16 - bit resolution (per configuration), and full autocalibration. The module provides 250 VAC continuous optical isolation (field to backplane) and group - to - group isolation, with on - board diagnostics including open - circuit (most types) and RTD short - circuit detection. It uses a detachable terminal board (IC695TBB016/IC695TBS016), supports hot - swap, and operates with RX3i CPUs (release 9.00+), delivering flexible, high - precision analog signal acquisition for industrial automation.
Read more
Quick view
Placeholder
Placeholder

GE IC695ALG616-EA

Product Overview

The IC695ALG616‑EA is a non‑isolated differential analog input module from GE Fanuc (Emerson Automation) for PACSystems RX3i PLCs, delivering 16 single‑ended or 8 differential channels for voltage/current signals (0–20mA, 4–20mA, ±20mA, ±10V, 0–10V, ±5V, 0–5V, 1–5V). It uses a 24‑bit ADC (12‑bit effective for linearity) with 10µs per‑channel conversion, 0.2% voltage/0.35% current accuracy, and 6 selectable filter cutoffs (8–500Hz). The single‑slot module runs on 3.3V (450mA)/5V (600mA) backplane power, has Module OK/Field Status LEDs, and works with RX3i universal backplanes (CPU firmware ≥3.0, Machine Edition ≥5.0 SP3). It converts sensor signals (temperature, pressure, flow) into PLC‑readable data for real‑time control in process/manufacturing automation.
Read more
Quick view

GE IC695ALG708

Product Introduction

The IC695ALG708 is an 8-channel non-isolated analog output module for PACSystems RX3i, designed to deliver precise voltage and current signals for industrial control applications. It is fully software-configurable via Proficy Machine Edition (no jumpers), with each channel independently settable to voltage (±10 V, 0–10 V) or current (0–20 mA, 4–20 mA) outputs. It offers 15.6–15.9 bits resolution (per range), 8 ms full-channel update rate, full autocalibration, and on-board diagnostics including high/low/high-high/low-low alarms, clamping, and over/underrange detection. The module uses detachable terminal boards (IC694TBB032/TBS032 or extended versions), supports hot-swap, and operates with RX3i CPUs (firmware 3.00+), providing flexible, high-precision control for actuators, valves, drives, and other field devices.
Read more
Quick view

GE IC695CHS007

Product Overview

The IC695CHS007 is a 7‑slot universal backplane from GE Fanuc (Emerson Automation) for PACSystems RX3i controllers, supporting both PCI‑based (IC695) and serial backplane (IC693/IC694) I/O/option modules, plus Series 90‑30 I/O. Slot 0 is dedicated to IC695 power supplies; Slots 1–5 have dual PCI/serial connectors; Slot 6 has PCI‑only connectors for IC695 single‑width modules. It features a left‑end 24V terminal strip, integral grounding bar, backplane ground point, and printed slot numbering. The backplane uses 3.3V (600mA)/5V (240mA) internal power, fits compact industrial enclosures, and carries UL/CE/ATEX certifications, enabling flexible, high‑density control system builds with hot‑swap capability and mixed module compatibility.
Read more
Quick view

GE IC695CPE302

Product Introduction

The IC695CPE302 is a high - performance multicore CPU module for PACSystems RX3i, engineered for real - time control of machines, processes, and distributed automation systems. It integrates 2 MB RAM and 2 MB non - volatile flash user memory, with battery - less data retention via the included IC695ACC400 Energy Pack, which writes user memory to non - volatile storage during power loss. It features 2 switched gigabit Ethernet ports, an isolated RS - 232 serial port, and a USB 2.0 port, supporting diverse industrial protocols like SRTP, Modbus TCP/IP, OPC UA, PROFINET, and Modbus RTU. The module operates on RX3i Universal Backplanes, supports up to 512 program blocks, and is compatible with Series 90 - 30 I/O for seamless migration. It uses Proficy Machine Edition for programming in Ladder Diagram, Structured Text, Function Block Diagram, and C, delivering powerful processing, secure communication, and flexible scalability for mission - critical industrial applications.
Read more
Quick view

GE IC695CPE305

Product Overview

The IC695CPE305 is a single‑slot, high‑performance CPU module from GE Fanuc (Emerson Automation) for PACSystems RX3i PLCs, featuring a 1.1GHz processor, 5MB RAM user memory, 5MB non‑volatile flash storage, and embedded 10/100Mbps Ethernet (PROFINET, Modbus TCP, SRTP), RS‑232 serial, and USB 2.0 ports. It supports 4 programming languages (Ladder Diagram, Structured Text, Function Block Diagram, C), 512 program blocks (max 128KB/block), and legacy Series 90‑30 I/O compatibility. The module runs on 3.3V (1.0A)/5V (1.0A, up to 1.5A with USB)/24V (0.5A startup/0.1A run, Energy Pack) backplane power, has 32Kbits discrete/%I/%Q and 32Kwords analog/%AI/%AQ reference tables, and includes an optional IC695ACC400 Energy Pack for power‑loss data protection. It delivers deterministic control for process/manufacturing automation with 0.72ms per 1000 Boolean instructions scan time and seamless HMI/SCADA integration via OPC UA.
Read more
Quick view

GE IC695CPE305LT-ABAD

Product Introduction

The IC695CPE305LT-ABAD is a rugged, high-performance multicore CPU module in the PACSystems RX3i lineup, built for real-time control of machines, processes, and distributed automation systems in extreme industrial environments. It features a 1.1 GHz dual-core processor, 5 MB RAM, and 5 MB non-volatile flash user memory, with battery-less data retention via the IC695ACC400 Energy Pack. It is equipped with 2 switched gigabit Ethernet ports, 1 isolated RS-232/485 serial port, and 1 USB 2.0 port, supporting protocols such as SRTP, Modbus TCP/IP, OPC UA, PROFINET, and Modbus RTU. The module operates on RX3i Universal Backplanes, supports up to 512 program blocks, and is compatible with Series 90-30 I/O for seamless migration. It uses Proficy Machine Edition for programming in Ladder Diagram, Structured Text, Function Block Diagram, and C, delivering powerful processing, secure communication, and flexible scalability for mission-critical industrial applications in harsh conditions.
Read more
Quick view

GE IC695CPE310

Product Overview

The IC695CPE310 is a high‑performance dual‑width CPU module from GE Fanuc (Emerson Automation) for PACSystems RX3i controllers, featuring a 1.1GHz Intel Atom processor, 10MB user RAM, 10MB non‑volatile flash, and a 3‑port 10/100/1000 Ethernet switch (2‑port switch + 1 uplink). It includes isolated RS‑232/RS‑485 serial ports, USB 2.0, and dual PCI/serial backplane support for RX3i/Series 90‑30 I/O. The module delivers 0.72ms per 1000 Boolean instructions scan time, supports 32Kbits discrete %I/%Q and 32Kwords analog %AI/%AQ, and runs on 3.3V (1.2A)/5V (1.5A)/24V (0.5A startup/0.1A run, Energy Pack) backplane power. It uses ladder/ST/FBD/C programming, handles up to 512 program blocks (128KB max/block), and offers optional IC695ACC400 Energy Pack for power‑loss data protection, with UL/CE/ATEX/DNV GL certifications for industrial/hazardous/marine use.
Read more
Quick view

GE IC695CPE310 PACSystems RX3i Controller — Full Technical Profile

Technical Specifications:
  • Processor: Equipped with a powerful processor capable of handling sophisticated control algorithms and large amounts of data at high speeds.
  • Memory: Features ample user memory for program storage and execution, alongside additional memory for data logging and historical information.
  • Communication Interfaces: Supports multiple communication protocols including Ethernet/IP, Modbus TCP, and serial communications, allowing seamless integration into diverse network environments.
  • I/O Capabilities: Designed to interface with various input/output modules, supporting both discrete and analog signals for comprehensive control over field devices.
  • Redundancy Options: Offers redundancy features to enhance system reliability, ensuring continuous operation in critical applications.
  • Environmental Tolerance: Built to operate reliably under harsh industrial conditions, withstanding wide temperature ranges, vibration, and electrical noise.
Read more
Quick view

GE IC695CPE310-ABAD

Product Introduction

The IC695CPE310-ABAD is a high-performance multicore CPU module within the PACSystems RX3i family, engineered for real-time control of complex machines, industrial processes, and distributed automation systems in harsh and hazardous environments. It incorporates a 1.1 GHz dual-core Intel Atom processor, 10 MB RAM, and 10 MB non-volatile flash user memory, with battery-less data retention via the IC695ACC400 Energy Pack. It is outfitted with 2 switched gigabit Ethernet ports, 1 isolated RS-232/485 serial port, and 1 USB 2.0 Type-A port, supporting protocols including SRTP, Modbus TCP/IP, OPC UA, PROFINET, and Modbus RTU. The module operates on RX3i Universal Backplanes, supports up to 512 program blocks, and maintains compatibility with Series 90-30 I/O for seamless migration. Programming is done via Proficy Machine Edition using Ladder Diagram, Structured Text, Function Block Diagram, and C, delivering robust processing, secure communication, and flexible scalability for mission-critical industrial applications in extreme settings.
Read more
Quick view

GE IC695CPE310-ACAT

Product Overview

The IC695CPE310 - ACAT is a high - performance dual - width CPU module belonging to GE Fanuc (Emerson Automation)'s PACSystems RX3i PLC series, with a 1.1GHz Intel Atom industrial processor at its core. It is equipped with 10MB user RAM and 10MB non - volatile flash storage, and integrates a 3 - port 10/100/1000 Ethernet switch (2 switch ports and 1 uplink port), isolated RS - 232/RS - 485 serial ports, and a USB 2.0 Type - A port. This module supports dual - purpose PCI and serial backplanes, which enables seamless compatibility with RX3i and Series 90 - 30 I/O modules. It has a Boolean logic execution speed of 0.72ms per 1000 instructions, can handle 32Kbits of discrete %I/%Q and 32Kwords of analog %AI/%AQ, and supports 4 programming languages, namely Ladder Diagram, Structured Text, Function Block Diagram, and C, along with a maximum of 512 program blocks (128KB per block). It holds UL, CE, ATEX Zone 2, and DNV GL marine certifications, and its optional IC695ACC400 Energy Pack can protect data when power is lost.
Read more
Quick view