Kongsberg Maritime RMP201-8
DEIF RMP-112D
TDK-Lambda RM15-2R0GB
-
Product Name: RM15 Series 15 W Single-Output Open-Frame Switching Power Supply
-
Models:
-
RM15-2R0GB: +5 V DC output, 3.0 A, 15 W
-
RM15-4R0GB: +12 V DC output, 1.25 A, 15 W (Note: some catalogs show RM15-12 = 12V; "4R0" typically denotes 5V/3A — verify label; RM15-xxGB suffix indicates GB = universal input, grounded, medical approval)
-
Foxboro RH926HT
-
Product Name: Foxboro I/A Series Fieldbus Module – RH926HT (typically a HART-enabled analog input or thermocouple/millivolt input FBM)
-
Series: Foxboro Evo / I/A Series FBM (Field Bus Module)
-
Function: Converts analog sensor signals (TC, RTD, mV, 4–20 mA with HART) to digital data on Foxboro fieldbus (50 Mbps serial highway or FCP fieldbus)
Kongsberg Maritime RDIOR400
Kongsberg Maritime RCU502I
-
Product Name: RCU502I Remote Control Unit (Intelligent Remote I/O & Logic Controller)
-
Part Number: 421768
-
Processor: Dual ARM Cortex-R5 (lockstep mode) @ 800 MHz — SIL 2 capable
-
I/O Capacity (typical): 16 × Digital Inputs 24 V DC (opto-isolated), 8 × Analog Inputs 4–20 mA / ±10 V (12-/16-bit), 8 × Relay Digital Outputs (5 A, NO/NC)
Bosch Rexroth MSK040C-0600-NN-M1-UG1-NNNN R911306061
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202
KOLLMORGEN S20260-VTS
Product Introduction:
The Kollmorgen S20260-VTS is a member of the SERVOSTAR 200 (S200) family—a compact, high-performance digital servo drive for brushless (BLM) and synchronous AC servo motors. "260" = continuous output current capability ~26 A peak or 260 V class; "VTS" denotes a specific firmware/connector/I/O configuration.
GE S732DVT-EST1
Product Introduction:
The GE S732DVT-EST1 belongs to the GE S700 (formerly Eurotherm / SSD Drives S700) digital DC thyristor drive family. "DVT" indicates a Digital Variable Thyristor drive; "EST1" typically designates a specific European-spec armature/field configuration or encoder feedback option board. Used for controlling DC motors in rolling mills, extruders, winders, and cranes.
ABB S200-ACN 490176050
Product Introduction:
The ABB S200-ACN is part of the S200 family of DIN-rail mount miniature circuit breakers. "ACN" typically denotes the S200 series configured for AC network protection (commonly S201/S202/S203-C or -B characteristic). The order code 490176050 maps to a specific pole/current/trip combination in ABB's Chinese/Asian catalog (S200-ACN line).
Honeywell S81-U1002-1
Product Introduction:
The Honeywell S81 series is a microprocessor-based burner management system (BMS) component—typically a flame signal amplifier or control module—used in commercial/industrial gas/oil burners. Version 2.4.10 refers to the firmware revision loaded on the EEPROM/flash. It works in conjunction with Honeywell RM78xx or similar burner sequencers.
