GE

• Product Overview: 100W rack-mounted power supply for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 racks, providing +5VDC, +12VDC, -12VDC outputs and logic sequencing signals to the backplane. It accepts selectable 120/240 VAC or 125 VDC input, features electronic short-circuit/overcurrent protection, power factor correction, and supports single or dual-rack operation with a prewired interconnection cable. It maintains output through at least one input line cycle during power loss and meets industrial safety standards.
• Technical Specifications - Input Voltage: AC: 90-264 VAC (47-63 Hz); DC: 100-150 VDC; selectable via external jumper

• Product Introduction: The IC697PWR711K is a 100W rack-mounted switching power supply module designed for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 or VME Integrator racks via a 48-pin backplane connector. It delivers +5 VDC, +12 VDC, and -12 VDC regulated outputs to power PLC CPUs, I/O modules, and peripherals, with support for 120/240 VAC or 125 VDC input, power factor correction, and ride-through capability for transient power loss. It can power one or two racks when total load stays within 100W rating, connected via a prewired inter-rack cable.
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Module Type: 100W switching power supply for Series 90-70 PLC backplanes

The IC698ACC701 is an intelligent lithium battery module designed by GE Fanuc Automation for the PACSystems RX7i and RX3i programmable logic controller families . This module functions as an auxiliary power source providing extended RAM backup for the central processing unit, ensuring that critical program logic, real-time clock settings, and volatile memory data are preserved during main power loss events . The smart feature distinguishes this battery from standard models through its integrated battery monitoring circuit, which continuously tracks battery health and generates low-voltage warnings to prevent unexpected data loss .

• Product Introduction: The IC698CHS117C is an 18‑slot wall‑mount I/O chassis for GE PACSystems RX7i PACs, built on a VME64 backplane with 4x standard VME bandwidth for high‑speed I/O throughput. It supports RX7i CPUs, RX7i I/O modules, Series 90‑70 I/O, and standard VME modules, with slot 0 dedicated to power modules, slot 1 for CPU (slot 2 used if dual‑width CPU with embedded Ethernet), and slots 3–18 for I/O. It features slot sensing, software configuration (no DIP switches/jumpers), and works with high‑power RX7i power supplies, delivering reliable, scalable I/O expansion for industrial control systems.
• Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
• Chassis Type: 18‑slot wall‑mount I/O chassis for PACSystems RX7i

• Product Overview: Single-slot reflective memory communication module for GE PACSystems RX7i PLCs, using reflective memory technology to enable deterministic real-time data sharing across fiber optic networks. It has 16MB SDRAM with parity, LC fiber optic ports, 2.12 Gbaud transfer rate, supports up to 256 nodes per network, and redundant transfer mode. The ED firmware fixes false alarms in high-temperature/high-data-load conditions, ensuring stable operation in industrial environments. It is CPU-independent, requires +5VDC/1.8A, and mounts in RX7i main rack slots 3 or 4.
• Technical Specifications - Memory: 16MB SDRAM with parity checking, 400ns typical access time

Technical Specifications

• IC698CMX016-ED Control Memory Exchange Module
  • Memory: 16 MB SDRAM with parity for reflective memory data storage .
  • Communication:
    • Fiber Optic Interface: 2.12 Gbaud transmission rate over multimode fiber (LC connectors), supporting up to 300 meters .
    • Network Nodes: Up to 256 nodes in a daisy-chained loop configuration .
    • Packet Sizes: Dynamic 4–64 bytes, achieving 43–174 MB/s transfer rates .