GE IC698CPE030-HN

  • Product Overview: Core CPU module for GE PACSystems RX7i programmable automation controllers, powered by a 600 MHz Pentium-M processor with 64 MB user RAM and 64 MB non-volatile user flash, dual 10/100 Mbps Ethernet ports, RS-232/RS-485 serial ports, and VME64 backplane compatibility. The HN firmware version delivers enhanced stability for high-data-load and extended-temperature operations, supporting Series 90-70 I/O and VME64 modules. It performs real-time control, data processing, and communication, with battery-backed memory for data retention and self-diagnostics for system integrity.
  • Technical Specifications - Processor: 600 MHz Pentium-M microprocessor with floating-point unit

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .

GE IC698CPE040‑JP

  • Product Introduction: The IC698CPE040‑JP is a single‑width, Japan‑specific CPU module for GE PACSystems RX7i PACs, powered by a 1.8 GHz Intel Pentium M microprocessor. It delivers high‑speed real‑time control for industrial processes, communicating with I/O and smart modules via a VME64 backplane. It integrates 64 MB battery‑backed RAM, 64 MB non‑volatile flash memory, dual 10/100BASE‑TX Ethernet ports, and three isolated serial ports (RS‑232/422/485). It supports IEC 61131‑3 programming languages, online logic modification, and firmware updates without hardware disassembly.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Processor: 1.8 GHz Intel Pentium M microprocessor, 32‑bit, supports floating‑point operations

GE IC698CRE040-HN

  • Product Overview: High-performance redundant control processor module for GE PACSystems RX7i PLCs, featuring a 1.8 GHz processor, 64 MB RAM, 64 MB non-volatile flash, dual 10/100 Mbps Ethernet ports, RS-232/RS-485 serial ports, and VME64 backplane compatibility. The HN firmware optimizes stability at high loads and 40°C–60°C, preventing false alarms and data corruption. It enables seamless main-standby switchover (<50ms) for uninterrupted control in critical systems, with battery-backed RAM and self-diagnostics for system integrity.

GE IC698CRE040-HN-2

Technical Specifications:
  • The IC698CRE040-HN-2 features a powerful processor enabling fast execution of control logic, suitable for demanding real-time applications.
  • It supports a large memory capacity for user programs and data, allowing for sophisticated control strategies and data logging.
  • Provides integrated Ethernet communication ports for connectivity to programming devices, HMIs, SCADA systems, and other controllers, supporting standard protocols such as Modbus TCP/IP and SNMP.
  • Compatible with the entire range of RX3i I/O modules, enabling flexible system expansion and customization to meet specific application needs.
  • Operates within a wide temperature range and is designed to withstand industrial environmental conditions, including electrical noise and vibration.

GE IC698ETM001

  • Product Introduction: The IC698ETM001 is a dedicated Ethernet interface module for GE PACSystems RX7i controllers, equipped with a 200 MHz Ethernet processor and an internal switch. It enables high-speed TCP/IP communication with GE controllers, HMI/SCADA, and third‑party systems, supporting Ethernet Global Data (EGD), Service Request Transport Protocol (SRTP), and Modbus TCP. It features dual auto‑sensing Ethernet ports, a serial station manager port, and redundant IP addressing for network reliability, with comprehensive diagnostics and web‑based monitoring.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Ethernet Processor: 200 MHz dedicated Ethernet processor

GE IC698PSA100

  • Product Overview: Dedicated primary power supply module for GE PACSystems RX7i PLC main racks, installed in slot 0 (leftmost) of the VME64 backplane. It converts 85–264 VAC or 100–150 VDC input to +5 VDC (20A), +12 VDC (2A), -12 VDC (1A) outputs, delivering 100W total power at 0°C–60°C without forced cooling. The module provides logic-level sequencing signals to backplane modules, maintains output during 1 AC line cycle interruption, and includes overcurrent/overtemperature/overvoltage protection with front-panel LED status indicators.
  • Technical Specifications - Input Voltage: 85–264 VAC (47–63 Hz) or 100–150 VDC; nominal 120/240 VAC or 125 VDC

GE IC698PSA350

  • Product Introduction: The IC698PSA350 is a 350W high-capacity power supply module designed for GE PACSystems RX7i PAC main racks, manufactured by GE Fanuc (now part of Emerson Automation). It plugs into slot 0 of the RX7i main rack, delivering +5 VDC, +12 VDC, and -12 VDC power to the backplane while providing logic-level sequencing signals for module operation. It supports wide input voltage ranges (85-264 VAC or 100-150 VDC), incorporates power factor correction, and features comprehensive protection mechanisms and status indicators.
  • Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
  • Input Voltage Range: 85–264 VAC (47–63 Hz); 100–150 VDC

GE IC698PSA350D

  • Product Overview: High-power primary power supply for GE PACSystems RX7i main racks, installed in slot 0 of the VME64 backplane. It converts 85–264 VAC (47–63 Hz) or 100–150 VDC input to +5 VDC (60A), +12 VDC (12A), -12 VDC (4A) outputs with 350W total power. The module sends logic-level sequencing signals to backplane modules, maintains output during 1 AC line cycle interruption, and includes overcurrent/overvoltage/short-circuit protection with front-panel LED indicators. Active power factor correction (PFC) improves efficiency and reduces harmonic distortion.
  • Technical Specifications - Input Voltage: 85–264 VAC (47–63 Hz) or 100–150 VDC; nominal 120/240 VAC or 125 VDC

GE IC752SPL013

  • Product Introduction: The IC752SPL013 is a dedicated operator interface panel for GE EX2100 excitation control systems, serving as the primary HMI for generator excitation monitoring and control. It integrates a 16‑character alphanumeric display, 12‑button keypad, and multiple communication ports to enable parameter configuration, real‑time status visualization, alarm management, and manual control functions in power generation applications. It is engineered for harsh industrial environments, with an IP54/NEMA 4X enclosure rating and wide temperature tolerance.
  • Manufacturer: GE Energy (General Electric Energy, now part of GE Vernova)
  • Display: 16‑character alphanumeric backlit LCD; LED backlight for visibility in low‑light conditions

GE IC752SPL013-BA

  • Product Overview: Dedicated operator interface keypad for GE EX2100 excitation control systems, enabling direct command input, parameter adjustment, and real-time status monitoring. Features a 12-button keypad with 16-character alphanumeric display, function keys for excitation-specific tasks, and field-replaceable hot-swap capability. Installs as a front-panel HMI in EX2100 cabinets; communicates via system backplane to exchange data with the excitation controller. Powers from 24 VDC system bus, operates in -40°C–70°C environments, and supports hot-swap without system shutdown.
  • Technical Specifications - Input Power: 24 VDC (nominal), 21.6–26.4 VDC range; 0.5A maximum current draw

GE IC752SPL013-BA

  • Input Voltage: 24V DC
  • Output Voltage: 0 - 10V DC
  • Current Capacity: 5A
  • Operating Temperature Range: - 40°C to +85°C
  • Storage Temperature Range: - 40°C to +85°C
  • Communication Interfaces: Support RS485, Modbus, DNP3, and IEC 61850 protocols