SIGMATEK DKL032
-
Product Name: DKL032 Digital Input Module, 8 × 24 V DC
-
Product Introduction: High-density 8-channel digital input module for acquiring dry-contact or 2-/3-wire sensor (PNP source-type) signals into the SIGMATEK DIAS control system.
-
Technical Specifications:
-
Inputs: 8 channels, 24 V DC, Type 1 / Type 3 per IEC 61131-2
-
SIGMATEK DKL002
MICHELL EA2-TX-100
Product Introduction: The Michell EA2-TX-100 is an industrial dew-point (or moisture in gas) transmitter designed for continuous online measurement of trace moisture in compressed air, dry gases, and process gases. It uses Michell's ceramic moisture sensor (advanced metal-oxide semiconductor) offering fast response, high accuracy, and resistance to contamination. Output is a 4–20 mA loop signal proportional to dew point or ppmV moisture content.
BRAUN E1667.111
Product Introduction: The Braun E1667.111 is a single- or dual-channel signal conditioning / monitoring module designed for use with eddy-current proximity probes (non-contact gap/velocity/acceleration sensors) in turbomachinery protection systems. It conditions the probe signal into a proportional DC voltage or 4–20 mA current and provides alarm/status outputs per API 670 recommendations. It is typically mounted in a Braun E16 rack system.
BEIJER E300 04380/04380A
Product Introduction: The Beijer E300 (often rebranded by Mitsubishi as the E300 series) is a compact, text/graphic operator terminal designed for machine-level visualization and control. It connects to PLCs via serial links and provides function keys, alarms, recipes, and simple graphics. The 04380 variant features a backlit monochrome LCD with a keypad.
BAUMÜLLER DSD28M65U6054
Product Name: Baumüller DSD2-028 (Frame Size 28) — DSD28M65U6054 Permanent Magnet Synchronous Servo Motor (High Dynamic)
Product Introduction: The Baumüller DSD2 series are compact, high-dynamic permanent magnet synchronous servo motors (PMSM) designed for applications requiring fast acceleration, precise positioning, and smooth running. The DSD28M65U6054 denotes a frame size 28 motor with specific winding, feedback, brake, and connector options. These motors are commonly paired with Baumüller b maXX or third-party servo drives.
GE DS200UCPBG6AFB
Product Introduction: The DS200UCPBG6AFB is a core processing board within GE's Speedtronic™ Mark V turbine control system. It functions as the I/O engine and control processor, executing application code, managing communication with I/O packs, and exchanging data over the Mark V COREBUS network. It contains the main microprocessor, memory sockets, and communication ports required for turbine control logic execution.
WOODHEAD DRL-DPM-BKF
Product Introduction: The DRL-DPM-BKF with PC/104 bus interface (also referenced as PC104-DPIO or PC104-DP10 depending on the backplane variant) is an embedded communication module that enables a PC/104 or PC/104-Plus based industrial computer to act as a PROFIBUS-DP Master station. It offloads the entire PROFIBUS protocol stack to its onboard processor (typically Hilscher netX-class ASIC), minimizing host CPU load.
SIGMATEK DPS001
Product Name: SIGMATEK DPS001 — Compact Industrial Control / Mixed Signal I/O Module
Product Introduction: The SIGMATEK DPS001 is a compact automation module used within SIGMATEK DIAS-based control systems. It provides combined digital and analog I/O capabilities and communicates with the central controller via the internal DIAS bus. It is designed for machine-level control, signal conditioning, and small-footprint automation tasks.
HINDS DPEM-460A 4022.455.16351
Product Introduction: The DPEM-460A is an electronic driver unit produced by Hinds Instruments for use with a Photoelastic Modulator (PEM) optical element. It generates a high-frequency sinusoidal drive voltage to induce periodic birefringence in the PEM crystal, thereby modulating the polarization state of a light beam passing through it. Widely used in spectroscopic ellipsometry, circular dichroism, and pump-probe experiments.
SIGMATEK DPB021
Product Name: SIGMATEK DPB021 — 16-Channel Digital Input Module (24 V DC, DIAS Compact Bus)
Product Introduction: The DPB021 is a digital input module from SIGMATEK's DIAS (Distributed I/O Automation System) family, designed to acquire 16 discrete 24 V DC signals from field devices such as pushbuttons, limit switches, or sensors, and transmit them to the SIGMATEK PLC/automation controller via the internal DIAS bus backplane.
Woodward EM-80-3522-1009
Product Name: Woodward EM-80 Actuator Driver / Electronic Governor Actuator Control Unit (Part No. EM-80-3522-1009)
Product Introduction: Part of Woodward's EM-80 / EM-300 electro-hydraulic actuator system — the EM-80 is a solid-state driver that accepts a speed/load error signal (from a governor or control such as EGCP/505) and drives the proportional actuator (electric or electro-hydraulic) to position fuel racks or valves.
