Metso PDP401
Product Introduction:
The Metso PDP401 is a microprocessor-based industrial automation device used either as a smart valve positioner for pneumatic control valves in process plants, or as a compact Distributed Processing Unit (DPU) in Metso DNA / Valmet DNA distributed control systems. It converts a 4–20 mA analog control signal into a precise pneumatic output to position the valve, or performs real-time I/O scanning, logic, and communication in a DCS node.
Honeywell R7247C1001
Product Name: Honeywell R7247C1001 Solid-State UV Flame Amplifier with Dynamic Self-Check
Product Brief: Plug-in flame amplifier module that processes signals from a Honeywell C7012E/F or C7061A/F ultraviolet flame detector and drives the flame relay in Burner Management Systems (BMS) such as R4140, R4075, BC7000. Features dynamic self-check to verify amplifier and sensor integrity during burner operation.
NI PXIe-8840
Product Name: NI PXIe-8840 PXI Express Embedded Controller (Intel Core i5-4400E or Core i7-5700EQ options)
Product Brief: General-purpose embedded controller for PXI Express systems. Offers dual-core i5 or quad-core i7 options, USB 3.0, Gigabit Ethernet, and supports Windows / NI Linux Real-Time. Designed for test, measurement, and DAQ applications requiring moderate to high CPU throughput.
NI PXIe-8135
Product Name: NI PXIe-8135 PXI Express Embedded Controller (Intel Core i7-3610QE, quad-core)
Product Brief: High-performance embedded controller for PXI Express chassis. Features 3rd-gen Intel Core i7 quad-core processor, removable storage option, integrated peripherals, and up to 8 GB/s system bandwidth to PXIe backplane. Runs Windows or NI Linux Real-Time.
ProSoft PTQ-PDPMV1
Microelettrica Scientifica PTC1177
Product Brief: Ceramic PTC (Positive Temperature Coefficient thermistor) start relay used to momentarily engage the start winding of single-phase capacitor-start or split-phase compressor motors. When energized, the PTC heats up and becomes high-resistance, effectively removing the start winding from circuit after run-up.
VanGuard PSMU-350-3
Product Name: Vanguard PSMU-350-3 CompactPCI (cPCI) 350W System Power Module
Product Brief: 3U/6U CompactPCI standard-compliant DC power supply delivering +3.3 V, +5 V, +12 V, -12 V from universal AC input. Intended for CPCI embedded computing, telecom, and test systems requiring hot-swap capable, redundant-ready power.
HIMA PS100023001
Product Name: HIMA PS1000/230 — 24 VDC System Power Supply Module for HIMax / HIQuad Safety Systems
Product Brief: Galvanically isolated, fanless switched-mode power supply engineered for SIL 3 safety-related control systems. Converts 230 VAC mains to regulated 24 VDC to power HIMA safety CPUs, I/O racks, and communication modules. Supports parallel redundant (1+1 / N+1) configuration.
Martek PS2494-YE
Product Name: Martek Power PS2494-YE AC-DC Switching Power Supply Unit (for Ionpure EDI stacks)
Product Brief: Industrial high-voltage DC output switching power supply designed to drive electrodeionization (EDI) modules or similar high-voltage/low-current DC loads. Accepts wide-range 3-phase AC input.
Kollmorgen PRD-B040EAIZ-33
Product Name: Kollmorgen AKD PRD-B040EAIZ-33 Digital Servo Drive
Product Brief: High-performance PWM servo amplifier from the AKD platform. Provides torque, speed, and position control for AKM-series permanent magnet synchronous motors. Supports EtherCAT (EAIZ = EtherCAT, no safe torque off in base code, I/O config variant) and advanced auto-tuning.
Emerson Epro PR9268/203-000
Product Name: Epro PR9268/203-000 Vertical Electrodynamic Vibration Velocity Sensor
Product Brief: An inertial seismic velocity transducer using electromagnetic induction to generate a voltage proportional to casing vibration velocity of rotating machinery. Designed for permanent online condition monitoring in turbine, compressor, and pump applications. Compatible with Epro MMS 3000 / MMS 6000 machinery protection systems.
Vibro-Meter RPS6U 200-582-500-013
-
Part Number: 200-582-500-013 (RPS6U PSU / rack assembly)
-
Function / Working Principle: Houses up to 6 Vibro-Meter signal conditioner / monitor cards (e.g. IOC4T, MPC4, AMC8) and provides regulated DC power (+5 V / ±12 V / +24 V depending on backplane) plus system alarm relays and bus communication to host machinery protection system (VM600 IPC / VIBRO-RACK).
