Foxboro FBM231 Single Power Supply Module
Product Classification: Single (Non-Redundant) AC/DC Power Supply
Product Introduction:
The Foxboro FBM231 is a single non-redundant power supply module used in Foxboro I/A Series chassis where redundancy is not required. It converts AC mains power to the multiple regulated DC voltage rails needed by all I/A Series modules. This module is typically deployed in non-critical applications, small systems, or as a secondary power supply in cost-optimized configurations.
Foxboro FBM230 Redundant Power Supply Module
Product Classification: Redundant AC/DC Power Supply
Product Introduction:
The Foxboro FBM230 is a redundant power supply module designed to provide continuous, uninterrupted DC power to all modules installed in a Foxboro I/A Series chassis. It features a dual-input redundant design ensuring that a single power source failure does not interrupt system operation. This module converts AC mains power to multiple regulated DC voltage rails required by the I/A Series modules.
Foxboro FBM219 Control Processor Module
Product Classification: 32-Bit RISC Control Processor
Product Introduction:
The Foxboro FBM219 is the primary control processor module serving as the central computing engine within the Foxboro I/A Series Distributed Control System (DCS). It executes all control strategies, sequential logic, arithmetic computations, and data management tasks for the entire control system. This module is the brain of the I/A Series architecture and interfaces directly with all I/O modules, communication modules, and operator stations.
Foxboro P0916JY Pneumatic Valve Positioner
Product Type: Special Configuration Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916JY is a special configuration variant of the P0916 series pneumatic valve positioner. The JY suffix denotes a custom or application-specific configuration typically requested for OEM integration, special signal requirements, or unique mounting arrangements. This model is configured per customer specification and may include modified input ranges, special output signals, custom mounting, or proprietary feedback linkages.
Foxboro P0916JTOE Pneumatic Valve Positioner with Junction Box Totally Enclosed
Product Type: Junction Box Totally Enclosed (JTOE) Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916JTOE is a pneumatic valve positioner equipped with an integral totally enclosed junction box (JTOE) for electrical connection termination. The JTOE suffix indicates the positioner includes a sealed, gasketed junction box that provides NEMA 4X / IP66 rated termination point for all electrical wiring. This configuration is used when field wiring must be terminated at the positioner rather than at a remote junction box, providing a single-point connection that is fully weatherproof.
Foxboro P0916FH Field-Hardened Pneumatic Valve Positioner
Product Type: Field-Hardened (FH) Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916FH is a field-hardened variant of the P0916 series pneumatic valve positioner designed for extreme environmental conditions including extreme temperatures, high vibration, heavy dust, and washdown exposure. The FH suffix indicates the unit has undergone enhanced environmental hardening beyond standard specifications. It maintains full 4-20 mA to 3-15 psi performance in the harshest field conditions.
Foxboro P0916DC Pneumatic Valve Positioner
Product Type: Double-Acting Cylinder Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916DC is a double-acting cylinder configuration pneumatic valve positioner. The DC suffix specifically denotes the double-acting (DA) actuator interface with a 6-30 psi (0.4-2.0 bar) output signal range option. This model is designed for double-acting pneumatic actuators that require air pressure on both the open and close strokes, providing higher thrust and faster stroke times than single-acting designs.
Foxboro P0916CC Pneumatic Valve Positioner
Product Type: Compact Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916CC is a compact configuration variant of the P0916 series pneumatic valve positioner. The CC suffix denotes a reduced-size housing designed for applications where space is limited on the valve actuator. It delivers full 4-20 mA to 3-15 psi conversion in a smaller footprint while maintaining the same performance specifications as standard models.
Foxboro P0916CA Pneumatic Valve Positioner
Product Type: Pneumatic Valve Positioner — Cast Aluminum Variant
Product Introduction:
The Foxboro P0916CA is a cast aluminum body variant of the P0916 series pneumatic valve positioner. The CA suffix indicates a cast aluminum housing construction optimized for corrosion resistance and durability in demanding process environments. It provides the same 4-20 mA to 3-15 psi signal conversion with enhanced environmental protection.
Foxboro P0916BT Bench Test Pneumatic Valve Positioner
Product Type: Bench Test Configuration Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916BT is a bench test configuration of the P0916AE pneumatic valve positioner. The BT suffix indicates the unit is configured for shop/bench testing and calibration rather than permanent field installation. It is used during manufacturing, commissioning, and maintenance to verify positioner performance before field deployment or after overhaul.
Foxboro P0916BX Explosion-Proof Pneumatic Valve Positioner
Product Type: Explosion-Proof Pneumatic Valve Positioner
Product Introduction:
The Foxboro P0916BX is a hazardous area rated pneumatic valve positioner designed for use in Class I, Division 1 and Division 2 locations where flammable gases, vapors, or dust may be present. The BX suffix denotes the explosion-proof (XP) enclosure construction. It delivers the same 4-20 mA to 3-15 psi conversion as standard models but is housed in a flame-proof aluminum enclosure certified for hazardous area operation.
Foxboro P0916AE Pneumatic Valve Positioner
Product Type: Pneumatic Valve Positioner (I/A Series Compatible)
Product Introduction:
The Foxboro P0916AE is a force-balance pneumatic valve positioner designed to convert a 4-20 mA DC electronic control signal into a proportional 3-15 psi (0.2-1.0 bar) pneumatic output signal. It provides precise positioning of sliding-stem control valves in industrial process control applications. The AE suffix denotes a standard double-acting actuator configuration with aluminum housing.
