ProSoft ILX56-MM - Image 1
ProSoft ILX56-MM - Image 2
ProSoft ILX56-MM - Image 3
Click to enlarge
ProSoft ILX56-MM
ProSoft ILX56-MM - Image 2
ProSoft ILX56-MM - Image 3
KUKA 1FK7101-5AZ91-1ZZ9-ZS07
KUKA 1FK7101-5AZ91-1ZZ9-ZS07
Back to products
MYCOM IMS500-120S
MYCOM IMS500-120S

ProSoft ILX56-MM

Product Name: Multi-Master Communication Module

Product Description: The ILX56-MM is an in-chassis multi-master communications module designed for Rockwell Automation ControlLogix and CompactLogix PLC platforms. It enables multiple Modbus TCP/IP masters to communicate with slave devices concurrently, simplifying integration of Modbus field equipment into Allen‑Bradley control systems.

Category:
Description

Technical Specifications:

  • Backplane: ControlLogix / CompactLogix compatible backplane
  • Communication Protocol: Modbus TCP/IP (Master)
  • Max Concurrent Masters: Up to 5 independent Modbus TCP masters
  • Connection Capacity: Supports multiple Modbus TCP slave connections
  • Data Transfer: Direct data exchange between Modbus devices and PLC controller tags
  • Operating Temperature: 0 °C to +60 °C
  • Power Supply: Powered via PLC chassis backplane
  • Enclosure: Chassis-mounted industrial module

Functional Features:

  • Supports up to five separate Modbus TCP master networks in one module
  • No custom ladder logic required for basic data mapping
  • Built-in web page configuration and diagnostic tools
  • Tag-based data exchange with Logix controllers
  • Fault monitoring and communication status reporting
  • Hot-swappable in qualified chassis environments

Application Scenarios:

  • Factory automation production lines
  • Water and wastewater treatment plants
  • Oil & gas remote monitoring systems
  • Power distribution control cabinets
  • Building industrial control retrofits

Performance Parameters:

  • Communication update rate depends on Modbus device response latency
  • Supports Modbus function codes 01,02,03,04,05,06,15,16
  • Tag memory mapping supports integer, float and bit data types

Structure Characteristics:

  • Standard 1756-style single slot chassis module
  • Front panel with status LED indicators for power, network and module health
  • RJ45 Ethernet port for Modbus TCP communication

Installation Requirements:

  • Install into available slot of ControlLogix or CompactLogix chassis
  • Proper chassis grounding per industrial standard
  • Ethernet cable routed away from high-voltage power cables
  • Firmware matching controller revision requirements

Notes:

  • Verify chassis current budget before installation
  • Use shielded industrial Ethernet cable for long distance runs
  • Configure IP addresses to avoid network conflicts
  • Module configuration completed via built-in web server
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ProSoft ILX56-MM”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ProSoft 5205-DFNT-PDPS

Product Brief Introduction

This standalone protocol conversion gateway is formally developed and produced by ProSoft Technology (United States), belonging to the standard ProLinx 5000 product series. The core design objective is realizing bidirectional real-time protocol translation between EtherNet/IP industrial Ethernet network and PROFIBUS DP-V0 Slave fieldbus network, establishing seamless data interaction between Rockwell EtherNet/IP master-side control equipment and Siemens PROFIBUS DP master host systems.
Read more
Quick view

ProSoft 5302-MBP-MCM4MB

Technical Specifications
  • Ports:
    • 1x Modbus Plus port (DB9 female connector, fully configurable for master/slave operation).
    • 4x Modbus serial ports (RS-232/RS-485, each independently configurable for master/slave roles).
  • Protocol Support:
    • Modbus Plus: Supports master and slave implementations.
    • Modbus RTU/ASCII: Supports master and slave modes on all serial ports.
  • Mechanical Design:
    • DIN-rail mounting for compact installation in control cabinets.
    • Dimensions: 21 × 54 × 32 mm (standard industrial form factor).
Read more
Quick view

ProSoft MVI56-MNETR Modbus TCP

  • Technical Specifications
    • Mechanical and Power Parameters
      • It adopts a single-slot design compatible with the Controllogix 1756 backplane, enabling easy installation into Controllogix chassis without occupying excessive space.
      • The backplane current load reaches 800 mA under 5 VDC and 3 mA under 24 VDC, matching the power supply requirements of Controllogix systems for stable operation.
    • Communication Parameters
      • It is equipped with a 10/100 Mbps Ethernet interface with auto-crossover detection, using an RJ45 connector suitable for Cat5 cables, and it supports Ethernet/IP pass-through communication.
      • It supports storage and transfer of up to 5000 16-bit registers with the Controllogix processor through block transfer or side-connect interface. Client parameters are configurable, including a minimum response delay ranging from 0 to 65535 milliseconds, and it also supports floating-point data types.
    • Environmental and Display Parameters
      • The operating temperature ranges from 0 °C to 60 °C, and the storage temperature ranges from -40 °C to 85 °C. It can operate normally in 5% to 95% relative humidity environments without condensation.
      • It is equipped with a 4-character scrolling alphanumeric LED display that shows module version, IP address, application port settings and error information, along with LED indicators for module status, application status and error status.
Read more
Quick view

ProSoft MVI56-PDPMV1 PROFIBUS DP-V1 Master Network Interface Module for ControlLogix

  • Technical Specifications
    • Power and Physical Parameters
      • It is compatible with the 1756 backplane and occupies a single slot. The backplane current load is 800 mA at 5.1 VDC and 3 mA at 24 VDC, matching standard ControlLogix chassis power supply configurations.
      • The operating temperature range is 0°C to 60°C, and the storage temperature range is -40°C to 85°C. It can operate normally in an environment with 5% to 95% relative humidity without condensation.
      • It resists 30g operational shock and 50g non-operational shock, and can withstand 5g vibration within the frequency range of 10Hz to 150Hz, adapting to harsh industrial site conditions.
    • Communication Parameters
      • It supports all standardized PROFIBUS baud rates, with the maximum baud rate reaching 12 Mbps, meeting the requirements of high-speed data transmission in industrial scenarios.
      • It can connect up to 125 slave devices and can access PROFIBUS PA slaves through DP/PA couplers or links. It also allows multiple master modules to be installed in a single rack to expand network capacity.
      • It is equipped with an RS-232 configuration port with an RJ45 interface, and comes with an RJ45 to DB-9 male cable for on-site configuration and debugging.
    • Software Compatibility Parameters
      • It works with ProSoft Configuration Builder software, supporting functions such as importing project-specific GSD files and automatic bus parameter calculation.
      • It uses ladder logic for data transfer between the module and the processor, and a sample ladder file with add-on instructions is provided to simplify the configuration process for users.
      • It supports communication with configuration software via Ethernet routing through Rockwell Automation Ethernet interfaces such as 1756-ENBT and 1756-EN2T.
Read more
Quick view

ProSoft MVI56E-SIE

Product Introduction:​ The MVI56E-SIE bridges Rockwell ControlLogix PACs to Siemens S7-200/300/400/1200/1500 controllers over ISO-on-TCP (RFC1006 S7comm). The Logix side sees it as a single 1756 I/O module; the Siemens side sees up to 20 independent S7 client connections originating from the ProSoft module IP. All socket management, TSAP negotiation and PUT/GET scheduling run on the module CPU, leaving ControlLogix scan untouched.
Read more
Quick view

ProSoft MVI69-MNET Modbus TCP

  • Technical Specifications
    • Power and Mechanical Parameters
      • It has a maximum current load of 800 mA at 5 VDC power supply. It adopts a standard 1769 single-slot design and is compatible with the 1769 backplane, which can be smoothly installed into the corresponding CompactLogix chassis.
      • It is recognized as a standard input and output module by the CompactLogix system, enabling unobstructed access to processor memory for smooth data transfer between the processor and the module.
    • Communication Parameters
      • It is equipped with a 10/100 Base-T Ethernet-compatible interface. The server driver can support connections to up to five Modbus TCP/IP clients through service port 502 with standard MBAP messaging, and another five clients through Modbus RTU/ASCII on service port 2000.
      • The client driver can actively read and write data with Modbus TCP/IP-compatible devices, and a single client can support up to 100 commands that can be sent to one or multiple servers. All data mapping of the module starts from Modbus register 40001.
    • Compatibility Parameters
      • It is compatible with all CompactLogix and MicroLogix 1500 LRP controllers, but it cannot be used with 1769-QBFC1B, 1769-L16X and 1769-L18X models. It supports Enron, Daniels and other floating-point data types to meet diverse data processing needs.
Read more
Quick view

ProSoft MVI69-PDPMV1

Product Overview The MVI69-PDPMV1 is a PROFIBUS DP-V1 master module designed by ProSoft Technology for Rockwell Automation's CompactLogix and MicroLogix PLCs. It serves as a bridge connecting PLCs to PROFIBUS network slave devices, enabling data exchange and control. This module is widely used in industrial automation systems to integrate devices from different manufacturers. Technical Specifications
  • Interface: PROFIBUS DP-V1
Read more
Quick view

ProSoft MVI94-MCM-MHI

Product Introduction:​ The MVI94-MCM-MHI is a single-width 1794 Flex I/O module that gives a Flex processor Modbus RTU/ASCII master or slave capability plus a MHI (Mitsubishi Heavy Industries) serial drive-highway driver, allowing direct polling of MHI-spec cranes, hoists and legacy drive controllers without an external protocol converter. Data moves asynchronously between the Flex backplane and the serial field, driven by simple ladder logic.
Read more
Quick view