ProSoft MVI56E-MNET - Image 1
ProSoft MVI56E-MNET - Image 2
Click to enlarge
ProSoft MVI56E-MNET
ProSoft MVI56E-MNET - Image 2
Converteam MVC3001-4003A
Converteam MVC3001-4003A
Back to products
ProSoft MVI56E-MNETCR
ProSoft MVI56E-MNETCR

ProSoft MVI56E-MNET

Product Name:​ Enhanced Modbus TCP/IP Client/Server Communication Module for ControlLogix.
Product Introduction:​ Single-slot 1756 backplane co-processor that bridges Rockwell ControlLogix PLCs to Modbus TCP/IP Ethernet networks. It runs an embedded RTOS on an ARM Cortex-A8 800 MHz CPU, mapping Modbus registers directly into Logix tag memory through ProSoft AOI instructions without occupying PLC scan time.
Category:
Description
Technical Specifications:
  • Platform: Rockwell 1756 ControlLogix, single slot (not Slot 0)
  • Ethernet: 2 × 10/100 Base-T RJ45, Auto-MDIX
  • Protocol: Modbus TCP/IP Client and Server simultaneously
  • Connections: 30 clients + 20 servers concurrent
  • Data area: 5000 16-bit registers (bit, word, float, long int)
  • Function codes: 01, 02, 03, 04, 05, 06, 15, 16
  • Backplane load: 800 mA @ 5 VDC, 3 mA @ 24 VDC
  • Memory: 128 MB SDRAM, 128 MB NAND Flash
  • Diagnostics: Built-in Web server, CIPconnect remote access, 4-char LED, OK/APP/ERR LEDs
  • Configuration: ProSoft Configuration Builder (PCB), ProSoft Discovery Service
  • Temperature: 0 °C to +60 °C (standard)
  • Shock/vibration: 30 g operational, 5 g @ 10–150 Hz
  • Certifications: CE, UL, cUL, ATEX, RoHS, GOST-R
Functional Features:​ Dual-port network segmentation, offline caching during PLC stop, command queue up to 100 entries, automatic IP discovery, hot-swap capable, backward compatible with legacy MVI56-MNET ladder logic.
Application Scenarios:​ Integrating third-party Modbus TCP meters, drives, protection relays and SCADA fronts into Allen-Bradley plants; retrofit of legacy RTU networks to Ethernet.
Installation / Notes:​ Insert only with rack power off; assign static IP via PDS; do not share E1 config port with heavy traffic; conformal-coated XT variant recommended for corrosive environments.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ProSoft MVI56E-MNET”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ProSoft 5601-RIO-MCM Remote I/O to Modbus Master

  • Technical Specifications
    • Electrical Parameters
      • The power supply voltage ranges from 18VDC to 32VDC, with a maximum current load of 500mA at 32VDC.
      • It adopts a passive power design that draws power directly from the connected Remote I/O scanner, eliminating the need for an independent external power supply and simplifying the wiring layout.
    • Communication Parameters
      • It supports Remote I/O, Modbus RTU and Modbus TCP protocols. The Modbus serial ports support baud rates ranging from 110 baud to 115k baud, with configurable stop bits of 1 or 2, data sizes of 7 or 8 bits, and parity options including none, even and odd.
      • The Remote I/O interface supports baud rates of 57.6k, 115k and 230k, and can realize block data transmission with the scanner, supporting BTR commands up to 63 words and BTW commands up to 64 words.
    • Environmental and Physical Parameters
      • The operating temperature ranges from -40°C to 85°C, and the storage temperature ranges from -40°C to 85°C. It can adapt to extreme temperature changes in both indoor and outdoor industrial sites.
      • The relative humidity tolerance is 5% to 95% non-condensing. Its dimensions are 222.25mm x 88.90mm x 38.10mm and it weighs 0.72kg.
Read more
Quick view

ProSoft MVI56-PDPMV1 PROFIBUS DP-V1 Master Network Interface Module for ControlLogix

  • Technical Specifications
    • Power and Physical Parameters
      • It is compatible with the 1756 backplane and occupies a single slot. The backplane current load is 800 mA at 5.1 VDC and 3 mA at 24 VDC, matching standard ControlLogix chassis power supply configurations.
      • The operating temperature range is 0°C to 60°C, and the storage temperature range is -40°C to 85°C. It can operate normally in an environment with 5% to 95% relative humidity without condensation.
      • It resists 30g operational shock and 50g non-operational shock, and can withstand 5g vibration within the frequency range of 10Hz to 150Hz, adapting to harsh industrial site conditions.
    • Communication Parameters
      • It supports all standardized PROFIBUS baud rates, with the maximum baud rate reaching 12 Mbps, meeting the requirements of high-speed data transmission in industrial scenarios.
      • It can connect up to 125 slave devices and can access PROFIBUS PA slaves through DP/PA couplers or links. It also allows multiple master modules to be installed in a single rack to expand network capacity.
      • It is equipped with an RS-232 configuration port with an RJ45 interface, and comes with an RJ45 to DB-9 male cable for on-site configuration and debugging.
    • Software Compatibility Parameters
      • It works with ProSoft Configuration Builder software, supporting functions such as importing project-specific GSD files and automatic bus parameter calculation.
      • It uses ladder logic for data transfer between the module and the processor, and a sample ladder file with add-on instructions is provided to simplify the configuration process for users.
      • It supports communication with configuration software via Ethernet routing through Rockwell Automation Ethernet interfaces such as 1756-ENBT and 1756-EN2T.
Read more
Quick view

ProSoft MVI56E-MNETCR

Product Name:​ ControlLogix Modbus TCP/IP + Serial Multi-Protocol Enhanced Module with Conformal Coating (CR variant).
Product Introduction:​ Variant of MVI56E-MNET adding two fully isolated RS-232/422/485 serial ports alongside one 10/100 RJ45, enabling parallel Modbus RTU/ASCII, DF1 and Modbus TCP conversion in one slot.
Read more
Quick view

ProSoft MVI56E-SIE

Product Introduction:​ The MVI56E-SIE bridges Rockwell ControlLogix PACs to Siemens S7-200/300/400/1200/1500 controllers over ISO-on-TCP (RFC1006 S7comm). The Logix side sees it as a single 1756 I/O module; the Siemens side sees up to 20 independent S7 client connections originating from the ProSoft module IP. All socket management, TSAP negotiation and PUT/GET scheduling run on the module CPU, leaving ControlLogix scan untouched.
Read more
Quick view

ProSoft PLX32-EIP-SIE Industrial Ethernet Communication Gateway

Technical Specifications
  • Power and Physical Parameters
    • It operates on a 24 VDC power supply and has a power consumption of approximately 5W, which is compatible with standard industrial power supply systems.
    • Its dimensions are 118 mm x 85 mm x 75 mm, and it adopts a compact structural design that saves installation space. It can be flexibly installed in various industrial control cabinets.
    • It has an operating temperature range of -40°C to 85°C, which allows it to run stably in extreme temperature environments such as cold workshops and high-temperature processing areas. It also features strong environmental adaptability with protection against dust and moisture.
  • Communication Parameters
    • It is equipped with Ethernet RJ-45 interfaces, supporting 10/100 Mbps Ethernet transmission rates to meet the data transmission needs of most industrial scenarios.
    • It supports dual subnet capability, allowing each protocol to reside on separate Ethernet subnets, which enhances the flexibility of network configuration.
    • It is compatible with multiple protocols including EtherNet/IP, Siemens Industrial Ethernet and Modbus TCP/IP, and realizes smooth protocol conversion and data interaction between different networks.
Read more
Quick view

ProSoft PTQ-PDPMV1

Product Brief:​ Single-slot Quantum backplane module that turns a Schneider Quantum PLC into a PROFIBUS DP-V1 Class 1 Master. Enables cyclic I/O exchange and acyclic services (alarms, parameterization, diagnostics) with up to 125 PROFIBUS slave devices.
Read more
Quick view

ProSoft RLX2-IHNF-A 802.11abgn Fast Industrial Hotspot

  • Technical Specifications
    • Physical and Environmental Parameters
      • It adopts a die-cast aluminum-plastic housing and DIN rail mounting. Its dimensions are 14.8 cm × 11.8 cm × 3.8 cm, and it weighs 499 grams, which is compact and easy to install in control cabinets.
      • The operating temperature range is -40°C to 70°C, and it can withstand up to 100% relative humidity without condensation. It complies with IEC 60068 anti-shock and anti-vibration standards, resisting 20g three-axis shock and 5g vibration from 10Hz to 150Hz.
    • Power Parameters
      • It supports 10 - 24 VDC power supply and is compatible with the 802.3af PoE standard. It can be powered by a PoE injector, reducing wiring complexity.
      • Its power consumption is less than 8W for Series C and less than 9W for Series B, featuring low energy consumption and adapting to long-term continuous operation in industrial systems.
    • Communication Parameters
      • It supports multiple wireless standards such as 802.11a, 802.11g, 802.11n, 802.11h and 802.11i, and is equipped with 3 RP-SMA antenna connectors for MIMO technology.
      • The adjustable transmit power ranges from 17 dBm to 22 dBm, and the receiver sensitivity is as low as -92 dBm at low transmission rates, ensuring stable signal reception.
      • It is equipped with one 10/100/1000 Base-T shielded RJ45 Ethernet port and one RS232 DB9 female serial port, supporting direct communication conversion between Modbus TCP/IP and Modbus RTU.
Read more
Quick view

Woodward 5466-1158

roduct Brief Introduction

This high-density discrete I/O module is independently designed and manufactured by Woodward (United States), belonging to the core supporting accessory lineup of Woodward MicroNet Plus turbine and genset control system. The core application targets discrete switching signal collection and field auxiliary equipment driving output for gas turbine, steam turbine, reciprocating compressor and distributed generator set control cabinet. The product realizes signal bridging between field limit switches
Read more
Quick view