Honeywell FC-TSHART-1620M - Image 1
Click to enlarge
Honeywell FC-TSDI-16UNI
Honeywell FC-TSDI-16UNI
Back to products
Honeywell FC-TSRO-0824
Honeywell FC-TSRO-0824

Honeywell FC-TSHART-1620M

  • Product Name: HART Safety Analog Input Module (16 Channel)
  • Product Introduction: Although specific datasheets vary, this module is part of Honeywell’s FC series Safety Manager I/O, specifically designed to interface with HART-enabled analog field instruments (e.g., transmitters) for safety and asset management.
Category:
Description
  • Technical Specifications & Performance Parameters:
    • Channels: 16 analog input channels with HART-over-Ethernet capability
    • Signal Type: Typically 4–20 mA with HART digital multiplex
    • Safety Rating: Generally SIL 2/SIL 3 capable in approved architectures
    • Communication: HART protocol supported on each channel; backplane communication via redundant I/O link
  • Functional Features: Combines safety analog acquisition with HART device diagnostics, enabling predictive maintenance via AMS Device Manager, channel isolation, and line fault detection.
  • Material & Structural Characteristics: Plug-in module with front-panel LEDs, housed in Safety Manager chassis or on terminal bases with HART modem integration.
  • Application Scenarios: Safety Instrumented Systems (SIS) requiring analog process variables (pressure, level, temp) with HART smart device management, refinery and chemical plant safety loops.
  • Working Principle: Converts 4–20 mA field current to digital values while superimposing HART FSK digital communication; passes analog data to safety logic and HART packets to asset management software via gateway.
  • Installation Requirements: Requires HART-compatible FTA or termination; shield grounding essential for noise immunity; install in controlled cabinet (IP20).
  • Usage Precautions: Ensure HART burst mode settings match system capacity; total HART traffic per module must be managed; verify intrinsic safety barriers if used in Div 2/Zone 2 areas.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Honeywell FC-TSHART-1620M”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Honeywell 05701-A-0293

Product Name

  • Full Official Product Name: Honeywell Sieger 05701-A-0293 Single Channel Gas Detection Sensor Drive & Signal Conditioning Control Card
  • Fixed Part Code: 05701-A-0293
  • Registered Brand: Honeywell (Sieger Gas Detection Product Division, United Kingdom Original Manufacture)
  • Product Classification: Standard 3U Eurocard Rack Plug-in Gas Monitoring Module, core component of Honeywell System 57 fixed gas detection control platform
Read more
Quick view

Honeywell 51195153-902 Pressure Sensor Module

Technical Specifications
  • Model: 51195153-902
  • Brand: Honeywell
  • Origin: United States
  • Pressure Range: ±5 PSI to ±200 PSI (customizable for specific needs)
  • Output Signal: 0-5 V analog voltage or 4-20 mA current loop (configurable)
  • Operating Temperature: -40°C to +125°C
  • Protection Rating: IP67 (dustproof and waterproof)
  • Communication Interface: Supports Modbus RTU and Profinet (industrial Ethernet protocols)
  • Material: Stainless steel 316L housing for compatibility with corrosive media
  • Response Time: 1 ms (typical for dynamic pressure scenarios)
  • Accuracy: ±0.1% FS (full-scale) over the specified range
  • Long-Term Stability: Zero drift ≤0.02% FS/year; span drift ≤0.05% FS/year
Read more
Quick view

Honeywell CC-IP0101 – Profibus DP Gateway Module Overview

Technical Specifications:

  • Type: IP Communication Module
  • Network Compatibility: Supports Ethernet networks for seamless integration
  • Protocols: Compatible with common building automation protocols such as BACnet/IP, Modbus TCP
  • Power Supply: Operates on standard power supply voltages suitable for building control systems
  • Environmental Conditions: Designed to operate under typical indoor conditions, ensuring reliability in various settings
Read more
Quick view

Honeywell CC-PCF901 51405047-175 Control Firewall Module

Technical Specifications
  • Brand: Honeywell
  • Model: CC-PCF901 51405047-175
  • Origin: USA
  • Voltage: 24V DC
  • Communication Protocols: Supports Modbus, Profibus, Ethernet, and other industrial protocols for interoperability.
  • Environmental Resistance: Operates in temperatures ranging from -40°C to 85°C, with IP67-rated protection against dust and water ingress.
  • Mounting: DIN rail or rack-mounted for compact installation.
  • Certifications: Complies with international safety and EMC standards, including CE and UL certifications.
Read more
Quick view

HONEYWELL CC-PCNT02 – High-Speed Redundant Process Control Module

The HONEYWELL CC-PCNT02 is a high-performance industrial controller module designed for distributed process automation within the Experion Series C platform. As part of Honeywell’s Experion Process Knowledge System (PKS), it delivers deterministic control, scalability, and advanced integration capabilities for mission-critical applications.
Read more
Quick view

Honeywell CC-PDIL01 Digital Input Module

Technical Specifications
  • Input Channels: 16 digital input channels (24V DC).
  • Signal Types: Supports dry and wet contact inputs.
  • Input Range: 0V (off) to 24V DC (on).
  • Input Current: 5mA @ 24V DC (typical).
  • Communication Protocol: Compatible with Modbus and other industrial standards.
  • Power Supply: 24V DC.
  • Operating Temperature: -20°C to +60°C (standard); some versions extend to -40°C to +110°C.
  • Protection Rating: IP20 or higher (varies by model).
  • Mounting: DIN rail or rack-mounted.
  • Dimensions: Approximately 100mm (height/width/depth may vary by version).
  • Weight: Around 2kg.
Read more
Quick view

Honeywell FC-TSDO-0824 Digital Discrete Output Module

Technical Specifications
  • Output Channels: 8 independent digital output channels
  • Voltage Rating: 24 V DC
  • Current Output per Channel: Up to 550 mA
  • Maximum Load per Channel: 13 W
  • Watchdog Timer: Built-in to reset outputs automatically in case of signal loss or system faults
  • Compatibility: Works with Honeywell Safety Manager 4000, 5000, and 6000 series, as well as third-party controllers compliant with EN61508 SIL2 or SIL3 standards
  • Housing: Robust metal enclosure with NEMA 4X and IP66 ratings for protection against dust and water ingress
  • Mounting: Modular design for easy DIN rail or rack installation
  • Operating Temperature: -20°C to +70°C (expandable to -40°C to +85°C with optional variants)
Read more
Quick view

Honeywell FC1000B1001 Flame Controller Ionization Type

Technical Specifications
  • Power Supply: 220V AC ±10%, 50/60Hz
  • Power Consumption: 5W
  • Operating Temperature Range: 0°C to 60°C
  • Humidity Tolerance: Up to 90% non-condensing
  • Flame Failure Response Time: <1 second (standard)
  • Output Type: Two sets of independent single-pole double-throw (SPDT) relays
  • Relay Contact Rating: 2A at 220V AC (resistive load)
  • Flame Signal Output: Optional analog output (0-5V DC or 4-20mA)
  • Protection Rating: IP40
  • Dimensions: Approximately 73mm (H) × 43mm (W) × 58.4mm (D)
  • Weight: Not specified in available sources
Read more
Quick view