VIBRO-METER GSI127 244-127-000-017-A2-B02 - Image 1
VIBRO-METER GSI127 244-127-000-017-A2-B02 - Image 2
VIBRO-METER GSI127 244-127-000-017-A2-B02 - Image 3
Click to enlarge
VIBRO-METER GSI127 244-127-000-017-A2-B02
VIBRO-METER GSI127 244-127-000-017-A2-B02 - Image 2
VIBRO-METER GSI127 244-127-000-017-A2-B02 - Image 3
DEIF GPU2GS
DEIF GPU2GS
Back to products
Parker GV6K-U6E
Parker GV6K-U6E

VIBRO-METER GSI127 244-127-000-017-A2-B02

  • Product Name: GSI127 Galvanic Separation Unit (Signal Isolation Amplifier)
  • Product Introduction: Part of the VM600 machinery protection system, this module provides 4kV galvanic isolation between field vibration sensors (accelerometers/proximity probes) and rack-based monitors to eliminate ground loops and protect against transient surges.
Category:
Description
  • Technical Specifications:
    • Model Suffix: A2 = Ex certified for hazardous areas (Zone 1/2), B02 = 1V/mA current-to-voltage conversion characteristic.
    • Supply: 18-30 VDC, no-load ≤80mA, loaded ≤120mA.
    • Output: 2-20 VDC (into 10kΩ), impedance 20Ω, offset 12mA @ 7V.
    • Bandwidth: 0-20 kHz full-range vibration transmission.
    • Drift: Offset ≤2 mV/°C, Sensitivity ≤50 ppm/°C.
    • Noise: Residual ≤3.5 µV RMS/√Hz.
    • Rejection: Power supply ripple rejection ≥60 dB (10-400 Hz).
  • Functional Features: Powers upstream sensors (max 22mA for IQS4xx/IPC707 etc.), floating output to reject common-mode noise, compliant with API 670for turbomachinery protection, SIL2 functional safety.
  • Structural Features: Plug-in module for VM600 rack, gold-plated backplane connectors, dual-stage isolation barrier.
  • Application Scenarios: Steam/gas turbine shaft vibration (X/Y probes), axial displacement, bearing housing acceleration in power plants, refineries, compressor stations.
  • Installation Requirements: Install between sensor preamplifier and monitoring rack; ensure barrier earth is connected to clean instrument ground; verify Ex certification label before hazardous area deployment.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “VIBRO-METER GSI127 244-127-000-017-A2-B02”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
Read more
Quick view

DEIF DLQ144-PC-NB

Technical Specifications:

  • Supply Voltage: 24 V DC (standard industrial voltage)
  • Power Consumption: Low consumption suitable for energy-efficient applications
  • Operating Temperature: -25°C to +70°C, ensuring performance in diverse environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Communication Protocols: Supports Modbus RTU, Modbus TCP, and other standard protocols for integration with SCADA systems
  • Dimensions (WxHxD): Compact design suitable for mounting in switchgear cabinets or control panels
  • Certifications: CE, UL, and other relevant industry standards
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view