Vibro-Meter IPC704 244-704-000-042 - Image 1
Vibro-Meter IPC704 244-704-000-042 - Image 2
Click to enlarge
Vibro-Meter IPC704 244-704-000-042
Vibro-Meter IPC704 244-704-000-042 - Image 2
LYNGSO MARINE IOM402
LYNGSO MARINE IOM402
Back to products
Bachmann IPC1412
Bachmann IPC1412

Vibro-Meter IPC704 244-704-000-042

  • Product Name: Vibration Signal Conditioner / Charge Amplifier
  • Product Introduction: A two-wire or three-wire signal converter designed to interface piezoelectric accelerometers (CA series) and dynamic pressure sensors (CP series) with VM600 monitoring cards or third-party DCS.
Category:
Description
  • Technical Specifications & Performance Parameters:
    • Input: Charge signal (up to 100,000 pC peak), sensitivity 10-200 pC/g.
    • Output: 2-wire 4-20mA (max 1km distance) or 3-wire ±5V/±10V.
    • Frequency Range: 0.5 Hz to 20 kHz.
    • Filters: Configurable HP (0.5/1/2/5/10 Hz) and LP (200 to 20k Hz).
    • Power: 18-30 VDC (typ. 24V), max 25 mA consumption.
    • Environment: -30°C to +85°C, IP40 aluminum die-cast housing.
  • Functional Features:
    • Integral Option: Built-in integration to convert Acc→Vel (mm/s) matching API 670.
    • RFI Protection: Internal RFI filters for high-EMI environments (VFDs, exciters).
    • Explosion Proof: ATEX/IECEx certified for Zone 0/1/2 (intrinsic safety).
  • Application Scenarios: Turbine generator sets, compressor stations, hazardous area (refinery/chemical) vibration monitoring.
  • Material & Structural Features: Compact aluminum enclosure (approx. 80x54x37 mm, 0.17kg), DIN rail or screw mount.
  • Working Principle: Receives high-impedance charge from piezo sensor, amplifies via internal op-amp circuitry, applies configurable filtering/integration, and drives a standard current/voltage signal down the line.
  • Installation Requirements: Mount on 35mm DIN rail inside a protected junction box or cabinet; shield must be grounded at one end only.
  • Usage Notes: Do not exceed 30VDC supply. Ensure the 244-704-000-042 variant is used for standard CA/CP sensors (not GaPO4 high-temp which requires 511 variant). Verify intrinsic safety loop calculations if in Ex zones.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Vibro-Meter IPC704 244-704-000-042”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

Elmo G-TUB30480ERSS0

  • Rated Voltage: 480 VAC
  • Rated Current: 30 A
  • Continuous Power: Up to 25 kW
  • Communication Interfaces: Ethernet, CANopen, RS232, EtherCAT, etc.
  • Feedback Types: Encoder, resolver, Hall sensor (depending on the model)
  • Operating Temperature Range: - 40°C to +70°C (industrial - grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Installation Method: Rack - mount, DIN - rail mount (depending on the model)
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view