HIMA F7131 981713102 - Image 1
HIMA F7131 981713102 - Image 2
HIMA F7131 981713102 - Image 3
Click to enlarge
HIMA F7131 981713102
HIMA F7131 981713102 - Image 2
HIMA F7131 981713102 - Image 3
HIMA F7130A
HIMA F7130A
Back to products
HIMA F7133
HIMA F7133

HIMA F7131 981713102

  • Product Name: Power Supply Monitoring Module
  • Product Introduction: Intelligent module for continuous surveillance of 3​ system 5 V​ power rails in HIMax / H51q / F71 series, detecting over/under voltage and reporting to CPU.
Category:
Description
  • Technical Specifications:
    • Monitored Voltages: 3​ channels of 5 V DC​ system supply
    • Own Power Consumption: 5 V DC: 25 mA, 24 V DC: 20 mA
    • Operating Voltage: 24 V DC​ (range 18–30 V)
    • Operating Temperature: -40°C to +70°C
    • Protection Rating: IP20
    • Material No.: 981713102
  • Functional Features: Precision analog acquisition of supply rails; fault detection time ≤ 10 ms; reports via backplane to CPU; supports buffer battery monitoring (some configs 12 V DC​ 8h backup).
  • Performance Parameters: SIL 3​ (IEC 61508); diagnostic coverage > 99%; communicates status via SafeEthernet​ / backplane.
  • Material Composition: Industrial PCB; front LED indicators (green OK, red Fault); plug-in metal/plastic housing.
  • Structural Features: Standard HIMA rack slot module; front-panel LEDs; hot-swappable design in redundant config.
  • Working Principle: Samples each 5 V​ rail via isolated ADC; compares against window comparator limits; out-of-range triggers interrupt to CPU and local LED; cyclic self-test of monitoring circuitry.
  • Advantage Highlights: Early power degradation detection prevents unexpected shutdown; integrates into system diagnostics without extra wiring; supports hot-swap in redundant arrays.
  • Applicable Industries: Critical Process Safety, Nuclear (where SIL 3 applies), Oil & Gas, Large-scale ESD.
  • Model Series: HIMA F71 Series.
  • Installation Requirements: Insert into monitoring-dedicated slot adjacent to power modules; ensure backplane connection clean; configure alarm thresholds in ELOP II / SILworX project.
  • Usage Precautions: Module itself requires 24 V DC​ and 5 V DC​ to operate—redundant power must be present; do not disconnect while system live unless redundant partner present; verify material number 981713102​ matches firmware to avoid false alarms.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HIMA F7131 981713102”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

HIMA F3330 984333002 Safety Control Module

Technical Specifications
  • Redundancy Structure: Quadruple Modular Redundant (QMR) design with four microprocessors (two per CU module).
  • Processor Configuration: Dual CU modules (1oo2D per CU, forming a 2oo4D system for enhanced reliability).
  • Memory: Flash EPROM for operating system and user programs (supports ≥100,000 write cycles), with sRAM for data storage.
  • Communication Interfaces:
    • Dual RS485 ports (isolated, transmission rate up to 57.6 kbps).
    • Ethernet, USB, RS232, RS422, and Siemens MPI serial interfaces.
    • CompactFlash port for storage expansion.
Read more
Quick view

HIMA F8628X 984862865 Communication Module

Technical Specifications
  • Communication Interfaces:
    • Ethernet (10/100 Mbps) with RJ-45 connector for high-speed data transfer.
    • PROFIBUS DP slave interface via a 9-pole SUB-D plug for integration with PROFIBUS networks.
    • High-Speed Serial Redundancy (HSR) interface via RJ-12 plug for redundant communication.
  • Processor: 32-bit Motorola CPU MPC860T with integrated RISC communication controller.
  • Power Supply: 24 VDC (5 VDC/1 A operating voltage).
  • Physical Dimensions: 3 HU (height units) x 4 SU (width units), compact design for easy installation.
  • Diagnostic Display: 6 LEDs for real-time status monitoring and diagnostics.
  • DIP Switches: 2 DIP switches for configuring module functions.
  • Warranty: 1-year warranty with global shipping availability.
Read more
Quick view

HIMA F8650X 984865065 Safety System Central Module

Technical Specifications
  • Processor: High-performance processor (specific model may vary, e.g., ARM Cortex-A9 or similar, depending on configuration).
  • Memory: Large-capacity memory, including DDR3 RAM (e.g., 512 MB) and NAND flash storage (e.g., 128 MB), for storing and processing extensive data.
  • Communication Interfaces: Equipped with multiple communication ports, such as Ethernet, fieldbus, RS-232, and USB, facilitating seamless connectivity with other devices and systems.
  • Power Supply: Operates on 24V DC power supply.
  • Operating Temperature: Ranges from 0°C to +60°C.
  • Storage Temperature: From -40°C to +85°C.
  • Certifications: Meets stringent safety standards, including IEC 61508 and DIN 19250, with certifications such as TÜV AK7/SIL4.
Read more
Quick view

HIMA H6200A

Manufacturer:​ HIMA Paul Hildebrandt GmbH & Co KG (Germany)
Product Brief:​ The H6200A is the central CPU module of the HIMA H6000 or HIMatrix safety instrumented system (SIS), designed for high-integrity emergency shutdown (ESD), fire & gas (F&G), and burner management (BMS) applications. It executes certified safety logic with continuous self-diagnostics and fail-safe behavior.
Read more
Quick view

HIMA K9202B

Product Introduction:​
The HIMA K9202B is a safety-related terminal/interface module used in HIMA Safety Instrumented Systems (SIS). It provides a standardized field-wiring interface for HIMA F-series safety I/O modules via pre-fabricated system cables, enabling plug-and-play module replacement. In some configurations it also serves as a safety communication coupler supporting industrial Ethernet protocols for controller-to-controller or controller-to-host data exchange in SIL 3 environments.
Read more
Quick view

HIMA X-COM01 985260001/985260000

Product Name:​ HIMax Communication Module
Overview:​ High-speed safety-certified communication interface for the HIMA HIMax Safety Instrumented System (SIS). Acts as the gateway between HIMax racks and external networks (DCS, SCADA, peer HIMax controllers). Designed with non-interference principle — loss of external communication does NOT affect safety logic execution.
Read more
Quick view

HIMA X-DI3201A

Product Name:​ HIMax 32-Channel Safety Digital Input Module
Overview:​ Reads 32 dry-contact or 24 V DC wet-contact field signals (e.g., E-stop, limit switches, proximity sensors) into the HIMax safety logic. Each channel is periodically tested for line break / short-circuit (cable monitoring).
Read more
Quick view

HIMA X-FAN1003 993201013 Discrete I/O Controller

Technical Specifications
  • Input/Output Configuration:
    • Built-in discrete I/O points for handling digital signals (single-bit or discrete states).
    • Supports multiple discrete input/output channels for flexible signal management.
  • Power Supply:
    • Operating voltage: 24 VDC / 120 VAC, accommodating diverse power requirements.
  • Physical Dimensions:
    • Compact design with dimensions of approximately 50 mm x 35 mm x 15 mm, facilitating easy installation in space-constrained environments.
  • Environmental Resistance:
    • Operates reliably in harsh conditions, including extreme temperatures and humidity levels.
Read more
Quick view