Show sidebar
Show 9 12 18 24
Clear filters

Triconex 3511 High-Precision Triple Redundant Pulse Input Module

Technical Specifications
  • Input and Signal Parameters
    • It is equipped with 8 independent non-common-ground input channels. The typical input voltage is 24 VDC, and the typical input current per channel is 10 mA.
    • The input signal frequency range is 1 Hz to 100 kHz, and the precision reaches ±0.01% when measuring frequencies between 1000 Hz and 20000 Hz.
    • It has a 16-bit resolution and a pulse counting resolution of 1 microsecond, and the pulse width resolution ranges from 100 microseconds to 10 milliseconds, which can capture pulse signal changes accurately.
  • Power and Physical Parameters
    • It relies on 24 VDC power supply to operate stably, matching the power supply configuration of most industrial control systems.
    • There are differences in dimension and weight data from different sources. One source states its dimensions as 80mm x 110mm x 40mm and weight of approximately 200 grams, while another source records dimensions as 120mm x 80mm x 30mm and weight of about 3.3 kilograms, which may be due to whether the measurement includes accessories.
Read more
Quick view

TRICONEX 3564 Digital Input Module

Technical Specifications
  • Input Channels: Multiple isolated digital inputs (specific configurations vary by model, e.g., 32 or 64 channels).
  • Input Voltage: Supports 115 VAC/DC or 24 VDC (model-dependent).
  • Switching Level: Clear on/off thresholds (e.g., >86 VAC/DC for "on," <28 VAC/DC for "off").
  • Response Time: Sub-millisecond for signal detection.
  • Isolation: Each channel is electrically isolated from the system bus.
  • Redundancy: TMR design with three independent channels per input.
  • Certifications: SIL 3 (IEC 61508), TÜV Rheinland-certified.
  • Operating Temperature: -40°C to +70°C (-40°F to 158°F).
  • Mounting: DIN rail or panel-mounted.
Read more
Quick view

Triconex 3601E Opto-Isolated Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 opto - isolated, non - commoned digital output channels. The nominal output voltage is 115 VAC, with a voltage range of 80 - 155 VAC and a frequency range of 47 - 63 Hz.
      • The relay rating of the module reaches 5 A at 250 VAC or 30 VDC, and the signal response time is no more than 2 ms, which can realize rapid execution of control commands.
    • Physical and Weight Parameters
      • The shell is made of aluminum alloy, with dimensions of 200mm × 150mm × 50mm and a weight of 2 kilograms, which is convenient for installation in standard industrial control cabinets.
    • Environmental Parameters
      • The operating temperature range is - 40 °C to 70 °C, and the storage temperature can reach - 40 °C to 85 °C. It can operate normally in an environment with a relative humidity of 0% - 95% (non - condensing).
      • It has an IP65 environmental protection rating, which can effectively prevent dust and water from entering the module and ensure stable operation in humid and dusty industrial environments.
Read more
Quick view

TRICONEX 3601T Digital Input/Output Module

Technical Specifications
  • Input/Output Configuration:
    • Supports 4 digital inputs and 4 digital outputs (model-dependent).
    • Input voltage: 24 VDC.
    • Output voltage: 24 VDC.
    • Maximum current per channel: 1 A (output).
  • Redundancy: TMR design with three independent channels per input/output.
  • Response Time: Sub-millisecond for signal detection and actuation.
  • Isolation: Each channel is electrically isolated from the system bus.
  • Certifications: SIL 3 (IEC 61508), TÜV Rheinland-certified.
  • Operating Temperature: -40°C to +70°C (-40°F to 158°F).
  • Dimensions: 100 mm x 50 mm x 25 mm (approximate).
  • Communication Protocol: Supports Modbus RTU/TCP for integration with PLCs, DCS, or SCADA systems.
Read more
Quick view

TRICONEX 3603E Digital I/O Module

Technical Specifications
  • Input/Output Configuration: Supports multiple digital inputs and outputs (specific configurations may vary based on model variants).
  • Input Voltage: Typically 24 VDC.
  • Output Voltage: Typically 24 VDC.
  • Maximum Current per Channel: Varies based on model, but generally supports currents suitable for industrial actuators.
  • Redundancy: TMR design with three independent channels per input/output.
  • Response Time: Sub-millisecond for signal detection and actuation.
  • Isolation: Each channel is electrically isolated from the system bus.
  • Certifications: SIL 3 (IEC 61508), TÜV Rheinland-certified.
  • Operating Temperature: -40°C to +70°C (-40°F to 158°F).
  • Mounting: DIN rail or panel-mounted.
  • Communication Protocol: Supports Modbus RTU/TCP for integration with PLCs, DCS, or SCADA systems.
Read more
Quick view

Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
      • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
      • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
    • Physical and Weight Parameters
      • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
      • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
    • Environmental Parameters
      • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
      • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.
Read more
Quick view

TRICONEX 3607E Digital Safety System Module

Technical Specifications
  • Safety Rating: SIL 3 (IEC 61508)
  • Channel Configuration: 32 channels (16 digital inputs + 16 digital outputs)
  • Input/Output Voltage: 24 VDC ±10%
  • Response Time: <50 ms (typical)
  • Operating Temperature: -40°C to +70°C
  • Communication Protocol: TriBus/TriStation
  • Processor: Three independent processors (200 MHz each)
  • Data Synchronization: Millisecond-level synchronization via proprietary TriBus
  • Weight: 1.2 kg
  • Certifications: TÜV Rheinland-certified, API 670 compliant
Read more
Quick view

Triconex 3623T 16-Point Triple Modular Redundancy Supervised Digital Output Module

Technical Specifications
    • Electrical Parameters
      • The nominal output voltage is 120 VDC, with a voltage range of 90 - 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
      • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
      • The field terminal is equipped with a 1 A fast - acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
    • Physical and Indicator Parameters
      • The module weighs 5000 grams, and its shell adopts a steel - blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
      • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.
Read more
Quick view

Triconex 3624 Communication Module

Technical Specifications:
  • Form Factor: Small-sized (13 × 19 mm), compact design for space-efficient installation.
  • Operating Temperature: Supports up to 105°C, ensuring reliability in high-temperature industrial environments.
  • Power Management: Features five distinct power modes for optimized energy efficiency and operational flexibility.
  • Connectivity:
    • Wireless Options: Includes Bluetooth LE 5.0 for wireless communication and remote support capabilities.
    • Wired Options: Supports Ethernet and fieldbus protocols (specific protocols depend on configuration).
Read more
Quick view

Triconex 3625 32-Point Triple Modular Redundancy Supervised

Technical Specifications
  • Electrical Parameters
    • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
    • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
    • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
  • Physical Parameters
    • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
    • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.
Read more
Quick view

Triconex 3625A 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is equipped with 32 output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel has a maximum output current of 1.7 A, a surge current of 7 A that can last for 10 milliseconds, a minimum load current of 10 mA, and a maximum load leakage current of 4 mA.
    • The isolation voltage between channels reaches 1500 VDC to effectively prevent electrical interference between different channels, and the overall power consumption of the module is less than 13 watts.
  • Physical Parameters
    • The module has dimensions of 160 x 160 x 125 mm and a weight of approximately 2.5 kg, which is suitable for installation in the slot of the Triconex system rack.
    • It adopts a corrosion-resistant metal shell, and is equipped with LED indicators for each output channel and overall status, which can directly display the working state of the module and each channel.
Read more
Quick view

Triconex 3625A Digital Output Module

Technical Specifications:
  • Channels: 8-channel digital output.
  • Output Type: Switch-type (ON/OFF).
  • Output Current: 2A per channel.
  • Load Voltage: 250V AC/DC.
  • Response Time: ≤2ms.
  • Power Consumption: ≤5W.
  • Operating Temperature: -20°C to +70°C (industrial-grade).
  • Dimensions: 160mm × 100mm × 25mm.
  • Weight: 1.35kg.
  • Certifications: Compliant with IEC 61508 (SIL 3), TÜV, and other industrial safety standards.
Read more
Quick view