GE IS200WETBH1B 104W5259P002
Product Introduction
The IS200WETBH1B is a Top Box B Assembly (WETB) printed circuit board (PCB) designed by GE Energy for the Mark VIe Wind Series turbine control systems. It serves as a critical interface and control module within the wind turbine’s top - of - tower (ToT) control enclosure, managing communication between the turbine’s on - tower sensors, actuators, and the central Mark VIe controller. The board integrates multiple I/O interfaces, power management circuits, and diagnostic features to ensure reliable operation in the harsh environmental conditions typical of wind farms, including extreme temperatures, humidity, and vibration.
GE IS200TVBAH2ACC Analog Input Termination Board (TVBA) for Mark VI Speedtronic Systems
Product Introduction
The IS200TVBAH2ACC is a high - performance Analog Input Termination Board produced by General Electric, and it is a core I/O component in the Mark VI Speedtronic series for gas and steam turbine control systems. It serves as a crucial interface between field analog sensors/transmitters and the Mark VI controller, responsible for precise acquisition, conditioning, and termination of 16 - channel analog signals. The board supports multiple signal types such as 4 - 20 mA current loops and 0 - 10 VDC voltage signals, and is equipped with 16 - bit A/D conversion and hardware filtering to guarantee accurate and stable data transmission in harsh industrial environments.
GE IS200TRLYS1B Relay Output Terminal Board (TRLY)
Product Introduction
The IS200TRLYS1B is a Relay Output Terminal Board manufactured by General Electric, designed specifically for the Mark VI Speedtronic series of gas and steam turbine control systems. It functions as a critical interface between the Mark VI control system and external field devices, providing reliable relay-based output signal termination and switching for discrete control applications. The board features 12 Form C (changeover) magnetic relays with integrated coil diagnostics, enabling precise and secure control of industrial actuators, valves, motors, and alarms. It supports seamless integration with VME-based Mark VI systems, operating in simplex, dual-redundancy, and triple-redundancy (TMR) configurations to ensure operational integrity in harsh industrial environments.
GE IS200TPROH1C Emergency Protection Terminal Board (TPRO)
Product Introduction
The IS200TPROH1C is an Emergency Protection Terminal Board developed by GE, serving as a core component of the Mark VI Speedtronic series for gas and steam turbine control systems. It integrates three PPRO (Protective Processor) I/O packs, a pair of potential transformers (PTs) for bus/generator voltage input, and speed signal conditioning circuitry to ensure reliable monitoring and protection in industrial control environments. This board enables seamless integration with Mark VIe backup trip relay terminal boards via DC - 37 pin connectors, supporting both simplex and Triple Modular Redundancy (TMR) configurations. It plays a vital role in emergency shutdown, overspeed protection, and fault - tolerant operation of turbines, maintaining system integrity in harsh industrial settings.
GE IS200TBCIH2CCD Contact Input Group Isolation Terminal Board (TBCI).
Product Introduction
The IS200TBCIH2CCD is a Contact Input Group Isolation Terminal Board manufactured by GE, specifically designed for the Mark VI Speedtronic series of gas and steam turbine management systems. It serves as a critical component for efficient signal termination, processing, and isolation of dry contact inputs in industrial control environments. This board facilitates seamless integration with GE's Mark VI platform, ensuring reliable and precise data acquisition while maintaining system integrity in demanding industrial settings. It supports both simplex and Triple Modular Redundancy (TMR) applications, working in conjunction with VTCC/VCRC processor boards in VME racks.
GE SFLA36AT0250
Product Overview
The GE SFLA36AT0250 is a 3-pole molded case circuit breaker (MCCB) from the Spectra RMS™ series, engineered for industrial and commercial power distribution systems requiring precise, reliable overcurrent protection. It features a digital solid-state RMS sensing trip unit with LSI (Long-Time, Short-Time, Instantaneous) protection functions, adjustable settings, and field-installable rating plugs for flexible ampacity configuration (70–250A). The bolt-on mount design ensures secure panelboard installation, while current-limiting technology minimizes fault energy let-through to protect downstream equipment.
GE RS-FS-9001
Product Overview
The GE RS-FS-9001 is a high-performance ultraviolet (UV) flame sensor from the Reuter-Stokes Flame Tracker™ series, engineered for industrial high-risk environments requiring reliable flame presence detection. It uses a silicon carbide (SiC) photodiode to capture long-wavelength UV radiation emitted by flames, which penetrates fuel mist, steam, and water vapor better than traditional UV sensors. The two-wire design with 4–20 mA output enables seamless integration with safety controllers, DCS, or PLC systems for rapid alarm triggering and safety shutdowns. It operates reliably in extreme temperatures (with optional water cooling), high pressure, and heavy vibration, making it ideal for combustion systems where false alarms or missed detection could lead to catastrophic incidents. The sensor replaces legacy models like 362A1052P001 and meets global safety certifications for hazardous area use.
GE PWB68A993125
Product Overview
The GE PWB68A993125 is a dedicated industrial control printed circuit board designed for SCR (Silicon Controlled Rectifier) gate driving, signal filtering, and electrical interface management in industrial automation, HVAC, and power control systems. It integrates SCR gate drive circuits, signal filtering stages, and terminal blocks to enable precise switching and regulation of SCR-based power circuits, ensuring stable load control and protection against electrical noise/interference. The board supports direct connection to standard industrial sensors, controllers, and SCR power modules, and operates reliably in harsh industrial environments with wide temperature ranges and electrical noise immunity. It serves as a critical interface between control systems (PLCs, DCS) and power switching components, facilitating seamless integration and enhanced system safety.
GE PQMII-T20-C
Product Overview
The GE PQMII-T20-C is a high-precision power quality meter from the PQM II Series, engineered for continuous monitoring, analysis, and control of three-phase electrical systems in industrial, commercial, and utility applications. It delivers comprehensive measurement of voltage, current, power, energy, frequency, harmonics, and power quality events (sags, swells, transients) with industry-leading accuracy. The unit supports 20 current inputs and 4 voltage inputs for multi-circuit monitoring, integrates 4 isolated analog outputs, 4 relay outputs, and 4 switch inputs for control/alarming, and offers Modbus RTU communication via RS232/RS485. It includes advanced features such as 63rd harmonic analysis, voltage disturbance recording (VDR), event logging, and waveform capture to diagnose power quality issues and protect critical assets.
DEIF PPU/2/GS
Product Overview
The DEIF PPU/2/GS (GE PPU2GS) is a compact, rugged generator paralleling and protection unit designed for precise control, synchronization, and protection of single or multiple generator sets in marine, industrial, and offshore power systems. It enables seamless paralleling of generators to share load, optimizes fuel efficiency, and provides comprehensive protection against electrical faults and operational anomalies. The unit integrates voltage, current, frequency, and power factor monitoring with advanced protection algorithms, ensuring safe and reliable power distribution. It supports manual or automatic synchronization, load sharing, and generator shedding based on predefined parameters, and interfaces with SCADA systems via analog outputs and optional communication modules.
GE PCH1026
Product Overview
The GE PCH1026 is a highly configurable digital structural vibration monitor engineered for low‑frequency (0.05–1000 Hz) monitoring in wind turbines, developed in collaboration with global turbine manufacturers and protecting over 100,000 units worldwide. It integrates a 3‑axis internal accelerometer (X/Y/Z) and up to 4 external sensor inputs to capture acceleration, velocity, and displacement across critical turbine structuresPCH Engineering A/S. The unit uses advanced DSP with 50% overlap FFT, 127 zoom ranges, and programmable filters to isolate structural modes from operational noise, delivering precise RMS/Peak/Peak‑to‑Peak measurements.
GE MX150
Product Overview
The GE MX150 is a microprocessor-based controller designed for GE Zenith ZTG/ZTGD/ZTGSE/ZTGDSE series automatic transfer switches (ATS), serving as the core control unit for emergency and standby power systems. It replaces the legacy MX100 controller and integrates a microprocessor board, LCD/keypad interface, and isolated I/O for seamless interaction with dual power sources (S1: normal, S2: emergency). The controller monitors voltage, frequency, and phase synchronization of both sources, automatically transferring loads to the backup source when the normal source fails, and retransferring once the normal source stabilizes within preset parameters.
